... and operation of an electrolyser unit in an offshore environment. netherlands platform offshore wind sustainable development infrastructure offshore hydrogen production electrolyser hydrogen production electrolyzer system offshore storage north sea hydrogen offshore installation nexstep...

.... upstream oil & gas actuator valve building block horizontal connector offshore technology conference asset and portfolio management connector offshore installation compact manifold xt system flexible jumper installation field development optimization and planning flexible line subsea...

... Abstract This paper presents an overview of 50 years of development of fire and blast resistant walls for offshore installations and introduces the fourth generation or "Type" of wall. This thoroughly tested and certified 4 th Type was developed as a response to the continuous quest to further...

... destined for scrap. Collaborative research with academic institutions provided the basis for industry leading probabilistic long-term degradation of large concrete structures in extreme environments. offshore installation extreme response topsides single lift removal disposal concrete structure...

... the design, the inherent hazards, residual risk, and the SMS. In 1992, regulations were enacted that required Safety Cases for offshore installations in the UK sector of the North Sea (ref. 2). These regulations were updated in 2005 (ref. 3). Workforce involvement has been an important facet of the SMS...

... that form a protective vault against pressure and water ingress. The FOC are secured at each end (FPSO and OLT) to the l-Tubes using Bending Stiffeners laid in a lazy-wave configuration using buoyancy modules near the seabed. offshore installation floating production system transportation foc...

... operational safety offshore installation offshore technology conference technical risk assessment consequence good practice likelihood installation safety case prevention upstream oil & gas regulation protection risk management complexity risk and uncertainty assessment risk assessment...

... safety risk is presented. environmental risk assessment reduction concentration upstream oil & gas hse risk safety discharge consequence ospar emission environmental impact risk assessment offshore installation substance health likelihood alarp principle produced water...

... of ultrasonic peening when required. For structural details with low as-built weld quality ultrasonic peening treatment could be the only solution left to enhance the fatigue life avoiding weld repair. The economical benefits due to reduced weld repair and/or maintenance on offshore installations as a result...

... was reinforced in 1986, when it became a formal OSPAR Recommendation. The measure remained valid fifteen years, until OSPAR Recommendation 2001/1 for the Management of Produced Water from Offshore Installations entered into force, in June 2001 (Ref 5). offshore installation discharge produced water...

... consumed half of their fatigue life ultrasonic peening treatment resets the clock to zero, as a minimum value. Consequently ultrasonic peening treatment was applied on FPSO Triton on fatigue sensitive weld connections with the objective to extend the service life of this offshore installation...

... environment is stricter today as a result of society's growing intolerance of pollution and other accidents, especially in the sensitive Arctic environment. This paper presents a Classification Society perspective on the challenges faced by both designers and operators of offshore installations in the Arctic...

... module upstream oil & gas operation manifold module pig loop valve completion otc 18965 subsea production equipment choke module installation offshore installation contractor xmas tree production system pipeline fabrication Copyright 2007, Offshore Technology Conference This paper...

... construction, the allowable interim period before the topsides were set could be increased. During the offshore installation, a combination of accurate weather forecasts and the ability to predict the SSCV s motion behavior during critical installation activities has proven to be successful, as the necessary...

... parts, personnel and materials. For an offshore installation this requires much more planning effort and limits the freedom of work execution. Also, limited amount of berths, limited space for material lay down, storage and limited workspace makes the offshore turnaround planning more complicated...

... the development of the ABS Guide for Crew Habitability on Offshore Installations, which includes accommodations and ambient environmental criteria and measurement methodologies, as well as the results of field-test validation measurements for ambient environmental criteria on ships and offshore installations...

... with respect to meeting the established SIL targets. risk reduction installation acceptance criteria safety function norwegian continental shelf risk management risk assessment iec 61508 instrumented system safety instrumented system regulation process plant offshore installation sil...

... assessment irt subsea system rescue modeling escape route offshore installation evacuation platform frontier offshore installation tempsc modeling contingency planning offshore technology conference procedure otc 12158 personnel event tree ice condition upstream oil & gas...

.... The abstract must contain conspicuous acknowledgment of where and by whom the paper was presented. Abstract The structural integrity of FPSO s and FSU s is clearly vital to the safe operation of such installations. Current UK Health & Safety law requires that an offshore installation at all times possesses...

... otc 12157 gas organisation safety management organisational structure safety performance safety artificial intelligence recursion fire risk system 4 operation acceptable level upstream oil & gas objective systemic approach fsm offshore installation fire safety regulation...