... Abstract Activated alumina and molecular sieve performances are compared regarding key parameters such as adsorbed water load, outlet moisture content, pressure drop and adsorption capacity using different regeneration conditions. The comparison was done by operating one out of three vessels...

... of the resulting geohazard risk. offshore technology conference magnitude shear strength solid-fluid boundary interaction randolph artificial intelligence assessment debris flow strength resistance loading submarine slide slide runout soil strength equation strain rate moisture content...

... of flotation were plotted against the moisture content of the mix normalized with the liquid limit of the soil (w/LL). The slurry resistance per unit volume of the pipe was calculated to be the difference in the unit weights of the slurry and the pipe plus contents at point of flotation. The mix resistance...

... cone resistance geophysical data cpt 1 reduction artificial intelligence soil condition reservoir characterization geotechnical investigation arbitrary reference line scour feature moisture content variation geophysical survey core 1 preconsolidation pressure upstream oil & gas...

... recommendations for laterally loaded piles with large displacement. diameter strength subsea system lateral displacement test 1 amplitude loading test 4 moisture content soil strength load line sequence single pile otc 16845 test 3 displacement prototype scale matlock deflection test 2...

... upstream oil & gas backfill pipe-in-pipe system moisture content flowline offshore technology conference offshore pipeline piping simulation thermal property OTC 13137 Utilizing Thermal Properties of Seabed Soils as Cost-Effective Insulation for Subsea Flowlines Alan G. Young, Marsco Inc...

... pipeline burial soft clay shear strength offshore technology conference trench programme deepwater cable burial moisture content otc 13141 pipeline burial piping design trench depth cable plough floatation backfill finch offshore pipeline piping simulation upstream oil & gas cable...

... moisture content otc 12034 offshore technology conference pip system pipe-in-pipe kenneth loch ohtc piping simulation conductivity thermal conductivity coating stolt offshore inc OTC 12034 Flowline Burial: An Economic Alternative to Pipe-in-Pipe Kenneth Loch, Stolt Offshore Inc. Copyright 2000...

... moisture content and the resulting properties to the degree of cure, i.e. crosslink density. In these studies the crosslink density has been varied by incomplete reaction. The structure can be characterized as dangling chain ends extending into segmental network structures. By varying the crosslink density...

... and to the authors' knowledge, no other model pile tests have been conducted in such fine cohesion less material. transducer moisture content monotonic testing sandy silt void ratio model pile procedure geomechanics monotonic pull test model pile test pile test calibration chamber calcareous sand...

... and Engineering Laboratory (CRREL).16-22/ The 1ocations of the USGS/ CRREL borings are show n i n Fig. 1. The results of these studies led to a comprehensive description of subsea soil and permafrost conditions in the vicinity Prudhoe Bay. overconsolidation reimnitz moisture content silt...

... it has become common practice to place the pipeline in a trench cut into the seabed to decrease the effect of hydrodynamic drag and for added protection against anchor drag. pipe diameter bearing capacity soft clay moisture content pipe plasticity lateral resistance diameter upstream oil...

... condition in the laboratory under steady state conditions. Experimental results on the three soils studied show that the thermal conductivity increases as dry density increases at a constant moisture content and that it increases as water content increases at constant dry density. These results confirm...

... moisture content pentane seawater atmospheric press strength moisture institute hydration crude oil paper offshore technology conference 6200 cylinder test specimen upstream oil & gas engineer hydrocarbon specimen reservoir characterization permeability OFFSHORE TECHNOLOGY...

... statements, the selection of disposal sites, and to estimate the short-term behavior of the material. Moisture content of the dumped material was found to be the most important parameter is describing its short-term behavior. INTRODUCTION Open water disposal of dredged material using-bottom dumping scows...

.... compressibility southern california compression bird rock paper offshore techndlogy sea-floor sediment consolidation strength silty sand silty clay moisture content continental shelf continental slope plasticity silt sediment water depth geotechnical property OFFSHORE TECHNDLOGY CO~FERENCE...

... ABSTRACT The stability of pipes embedded in clay at water content above the liquid limit was investigated. Pipe sections remain stable within a weight range depending on the clay moisture content. Soil resistances to flotation and settlement decrease, with the increase in clay water content...

.... experiment moisture content measurementof flume spectrum storm otc 1949 number 0 tc1949 penetration engineer transfer function sea state degradation institute sea water upstream oil & gas reinforcement steel platform spectra wave height OFFSHORE TECHNOLOGY -CONFERENCE 6200 North...

... ABSTRACT Because of their high moisture content, marine sediments have characteristics of both solids and liquids. Being neither liquid nor solid it is difficult to evaluate material 'constants using conventional soil-testing equipment .or conventional liquid viscometers. However...

... and supporting data furnished by the designer, in addition to the above mentioned requirements, form the basis for Bureau acceptance. welding electrode engineer higher strength steel steel drilling equipment strength steel weld moisture content strength electroslag requirement offshore mobile...