... molding and CNC machining. The cost savings of NNS technology and the process is demonstrated with manufacturing examples comparing the traditional process of CNC machining parts from stock shapes such as sheet, rod or tube to the NNS technology process. Included in the examples are detailed production...

... Abstract Experiences from a chemical supplier perspective are presented to define, optimize and manufacture a surfactant for use with seawater in an offshore enhanced oil recovery (EOR) test. This includes laboratory screening test results followed by quality control checks during manufacture...

... carried out to confirm the integrity of the retained brownfield infrastructure. The design, qualification and manufacture of the biggest bend stiffener produced by the supplier transpired to be a significant risk for the project and the program to address this is described herein. The final riser system...

... programme for reelable X80 linepipe. V&M Tubes manufactured seamless X80 pipe of 323.9mm OD x 18mm WT pipe in accordance with DNV OS-F101, supplementary P requirements. Subsea 7 developed and qualified a mechanised girth weld procedure based on the GMAW-CMT/PGMAW welding process. Procedure qualification...

... responsible for design, procurement, manufacture, construction, commissioning, operations, and maintenance. This presentation will highlight the important considerations and discussions that must take place before the corrosion protection system is designed. This must start with defining the expectations...

... conference rpsea otc 24195 us government riser technology rpsea project rpsea program riser technology riser shrink-fit connection upstream oil & gas manufacture requirement riser system Presentation of OTC-24195-MS Presentation of OTC-24195-MS OTC 24195 RPSEA Program Riser...

... floating production system otc 23175 angola local company offshore technology conference manufacture manifold module O Pa Ste Cop This This revie offic repr Ab Be oil wh ma yar Du Ar of suc the Th dur TC 2317 zflor: P ven CROG yright 2012, Offshore paper was prepared paper was selected wed...

... still to be discovered in both GoM deepwater and ultra-deepwater regions. polyester rope manufacture offshore technology conference upstream oil & gas connector technology deepwater shackle offshore connector synthetic fiber rope engineering integrity line connector production...

... steel upstream oil & gas otc 20202 white paper offshore technology conference quality control specification marshall moonshine hill api spec 2sc jewelry platform manufacture mooring system inspection strength offshore structure toughness subsea system requirement critical...

... Africa. The document includes a review of design of a complex umbilical system containing a three inch central super duplex tube, electrical cables and fiber optics and focuses upon the challenges of the design and manufacture of the structure and in particular the challenges of design for fatigue...

... installation piping design offshore technology conference linepipe manufacture pipe material pipeline pipe corus tube specification export pipeline requirement midstream oil & gas diameter otc 19883 williams supplier upstream oil & gas offshore pipeline piping...

... to manufacture floating equipment generally matches the casing itself. The space between the shoe and collar is commonly called the shoe track or shoe joint. Either term is commonly recognized by those personnel involved in casing cementing operations. The shoe track is filled with tail slurry after the top...

... of construction as they are corrosion resistant, lightweight and cost effective. This paper describes the industrial process from the initial concept of Glass Reinforced Polymer (GRP) mudmats through to manufacture, large scale mechanical testing and on site installation of a GRP mudmat system for a major...

.... This seam would be welded to produce a continuous pipe. BRC pipes could have fibre optic sensors embedded within them during manufacture to allow real time condition monitoring. Additional strength can be provided by deploying and welding several, concentrically nested BRC pipes or wraps . Figure 1 BRC...

... Abstract The Typhoon Field development required 9,000 psi MAWP flowlines from the four subsea wells to the TLP. An overview is presented of the design, manufacturing and installation of these four flexible flowlines. The flowline design required the use of insulation for flow assurance, start...

... inspection subsea system chomotov sandvik halden troika wall thickness investigation onshore technology conference requirement assembly termination upstream oil & gas otc 8885 alcatel manufacturing facility welding technology conference manufacture controls and umbilicals...

... otc 8451 cooper cameron production riser system brian hart sam gomersall programme subsea standardisation hanger riser system cross operator sharing manufacture upstream oil & gas installation standardisation lower riser package OTC 8451 SUBSEA STANDARDISATION: THE REALIN...

... execution project manager engineer upstream oil & gas engineering prograrnme project control fast track management otc 8055 strategic planning and management alliance project management control system interface manufacture ownership schedufe delivery concurrent engineering...

... manufacturers, installation contractors and other operators pursuing floating system options for development of deepwater fields. Specific results to be addressed include design criteria component selection, corrosion protection systems, component manufacture, anchor performance, locked coil failures, buoy pin...

... ABSTRACT A unique process was developed to manufacture a titanium riser stress joint. The weld free 30 foot long TF64(ELI) component was produced so that the flanges were integrally extruded on the tube portionof the riser. The full size production part was extruded following a development...