... fpso subsea system contract availability fabrication floating production systems delivery offshore technology conference project management real time system contractor project delivery manifold partnership deployment execution milestone metrology innovative project delivery...

..., utilizing a subsea layout simulation frame-work which incorporates several design considerations such as well target locations in the reservoir, wells per manifold, bathymetry of the seabed, exclusion areas on the seabed, flow assurance, metocean considerations, flowline laying considerations, and pigging...

... planning and management export pipeline export manifold completion installation contractor operation requirement jumper fpu flowline manifold anchor project delivery Background The Anchor project is a deepwater high pressure project with a shut-in tubing pressure (SITP) greater than...

... identified in recent projects, fostering new equipment suppliers, softening the transition to next equipment generation from the same supplier and enable the use of all-electrical shared actuation systems in subsea manifolds connected to WCTs from a different supplier. Besides, this paper discusses...

... Abstract The brownfields offshore Brazil comprise over 11,000 km of subsea pipelines and risers, 700 subsea Christmas-Trees and 60 manifolds, all interconnected with more than 50 platforms. These fields offer promising investment opportunities due to enhanced reservoir knowledge...

... equipment to be deployed across multiple HPHT assets. Qualification of 16,500 psi rated production manifolds and boosting equipment is complete for the Anchor project. Two production 4-slot manifolds and a combined 4-slot manifold and pump station were successfully installed in July of 2023. Qualification...

... producers and injectors). Alternatives for subsea architecture included configurations such as satellite wells, collection ring, manifold, and daisy-chain. Abstract This paper presents a multidisciplinary view of the evolution in the concept of a development project for the central area of Sururu...

... The subsea production manifolds and water injection terminals are connected through 8 oil production risers and two water injection risers to a Floating Production, Storage and Offloading (FPSO) facility. The FPSO has gross liquid capacity of 280 kbpd, nameplate oil capacity of 225 kbopd...

... production monitoring operation enhanced recovery production logging reservoir surveillance pipeline pigging liquid holdup manifold state-of-art study pipeline south fl tieback deepwater gas pipeline network liquid hold-up reduction back-pressure management north fl offshore technology...

... activities. salt tectonics controls and umbilicals geologist subsea system interface structural geology reservoir characterization operation valve simulated operation jumper ssdv-urg-04 esdv-mxl-02 manifold petrobras simulation offshore technology conference intermediate manifold esdv...

... technology conference manifold petrobras santos basin pre-salt reservoir membrane module water alternating ga Introduction The Pre-salt discoveries of Santos Basin represent huge volumes of light oil (28 to 30 degrees API) and a challenging scenario: ultra-deep water (greater than 2,000 meters...

... such as the number and size of flowlines, a simple vs. full functionality manifold, and the number of chemicals and associated number and size of umbilicals. This process led to a significantly simpler subsea development concept with far less equipment to procure, fabricate, and install. In addition to focusing...

... signals to a control room on a capable vessel. Workclass ROVs ( Figure 1 ) have manipulable arms to assist in maneuvering and underwater interventions. Manifold ( Figure 2 ) is the Underwater Equipment that is interconnected to several Wet Christmas Trees with the the fluids produced from...

... based on the risk associated with the operation of subsea equipment. This project was focused specificaly on Christmas trees (XTs), Emergency Shutdown Valves (ESDV), Subsea Manifolds, Pipeline End Manifold (PLEM) and Pipeline End Termination (PLET) and carried out by PETROBRAS in partnership...

... process valve subsea processing manifold module actuator pump module upstream oil & gas torque hp ht actuator requirement operation interface valve lp lt actuator valve operation Section 2: Introduction Vigdis Field The Vigdis field was discovered in 1986, between the Snorre...

... production trees, manifolds, and a boosting station, together with a subsea distribution and control system. Based on this architecture, an alternative field concept optimized for partial electric actuation resulted in very competitive commercial scenarios in addition to operational benefits and increased...

... of eight manifolds (four production and four WAG), two dynamic and four infield umbilicals, a fiber optic line to shore, six 12 in. production risers, two 12 in. water injection risers, and two 12 in. gas injection risers, and the associated flowlines, pipelines, and architecture to connect the system...

... The use of Shared-Actuation Control (SAC) in subsea manifolds has been one of the most disruptive technologies applied in subsea production systems for the last 20 years. In [ 1 ], a comprehensive review of the efforts spent by oil & gas industry along the years, to develop SAC in subsea...

...". Manifold-Based Architectures Considering that reducing quantity of the risers may allow the increase of the ramp-up speed and cost reduction is something desirable, the assessment of other subsea architectures that allow the sharing of subsea assets for more than one well may be fruitful to achieve...

... planning and management project management fcm manifold kollsne reduction approx upstream oil & gas platform pipeline troll phase 3 tie-in spool production control reservoir surveillance flowline pressure drop module offshore technology conference valve tree development concept...