...-35344-ms contract revitalization reduction completion drillship campos basin contribution optimization offshore technology conference rig The inception of the Campos Basin Revitalization Program (CBRP) took place in 2020, marking the establishment of a structured plan. This comprehensive...

... will outline how the Anchor project prepared for a development well campaign using both a 15,000 (15k) psi drillship and new build 20,000 (20k) psi drillship and the approach to develop and lock down the well design early to enable development drilling. During early project planning, the wells team prepared...

... The wells drilled in the Stabroek block have an average water depth of 6,562 ft; hence, wells are typically drilled via drillships. These drillships are new-generation dual-activity dynamically positioned DP3-type drillships, capable of drilling in harsh environments and water depths up to 10,000...

... of a number of high specification drillships. This work looks at the potential to covert a redundant drillship into a 64 MW net grazing OTEC production facility. Redundant vessels can be purchased at scrap value, which minimizes capital cost and thereby helps to improve economic feasibility while also...

... relational database bob drilling operation ontology knowledge graph offshore technology conference drillship database graph database enhance drilling operation node decision-making information upstream oil & gas graph knowledge system Agarwal , Basant & Mittal , Namita...

... The concept of a deepwater well manufacturing machine, defining the next generation drillship design, provides a blank canvas for the pre-commissioned integration and deployment of complex subsea completion systems. Input from operators and third-party service providers on future deepwater...

... riser deepwater drillship flowrate installation calculation mpd system frictional pressure loss drillship mpd equipment installation erosion calculation prv flow rate fpl program mpd installation well control upstream oil & gas annular pressure drilling gage managed...

... by a trade-off study considering mooring systems with and without disconnection capabilities. Industry Experience: Moored Floaters in Ice Mooring designs for Mobile Offshore Drilling Units (MODUs) operating in and around ice originate from the 1970s with the Canmar drillships and later the Kulluk drill barge...

... well centers is required, at drill floor level as well as in the moonpool. This arrangement does not exist on earlier or contemporary drillship designs. In general a drillship features ample deck space, but the vessel deck areas and the well centers are longitudinally arranged. This causes the forward...

... Abstract During transit, a drillship moonpool creates added resistance that can be more than 50% of the total resistance and hence significantly increase the fuel consumption. This paper reports a real case study for reducing moonpool added resistance by model tests and Computational Fluid...

... to quickly disconnect the mooring system and leave the location, as well as a short reconnection time, is of great importance for safety and productivity. To meet the industry need for exploration drilling in shallow water in the Arctic, an attachable turret mooring system for drillships, ATMOS (attachable...

... and organisa- tional level that enabled the delivery of performance that benchmarks in the P5 range of the industry in both schedule and cost. Essential catalysts for this performance included the immediate, repeat use of the 6th generation DP drillship MODU from the earlier Phase 2 campaign, standardisation...

... Abstract This paper compares results of a deepwater geotechnical investigation using a seafloor drilling system, large-diameter core samples, and cone penetration tests performed from a coring vessel with results of a geotechnical investigation performed from a conventional drillship...

... Abstract Drillships have proven to be an attractive type of mobile offshore drilling unit due to their excellent mobility and large variable load capacity. The technical challenges of the new generation of ultra deepwater drillships include greater efficiency and increased capability of both...

... OTC 21498 Integrated Design Based 6th Generation Deepwater Drillships Design & Engineering, Construction, Commissioning & System Integration Testing and Sea Trials L.C. Claassen, SPE, GustoMSC, Y.C. Lee, Hyundai Heavy Industries, S.M. Hendriks, GustoMSC, Rakesh Kumar, Hyundai Heavy Industries...

... Abstract In the deepwater areas, typically 5th and 6th generation drilling vessels are mobilized for operations. Driven by economic mo-tives and based on Surface BOP systems, improved functional specifications have been incorporated into a newbuild drillship of a reduced size, with improved...

... to the latest generation of drillships. The extended season (beyond the benign Arctic summer) experiences weather more analogous to a North Sea wind and wave environment. To take advantage of the full open water season at the well location, early approach to the Arctic (as well as late exodus) dictate hull...

... on the comprehensive interpretation of 2D and 3D seismic surveys, recorder hydrate exploration program horizontal drilling log analysis drillship drillpipe hydrate zone well logging japan drilling operation experiment program upstream oil & gas inch hole evaluation offshore technology...

... drillship riser production operation dp system 100-yr return period process facility generation system requirement field development unit waterdepth operation subsea system mooring system 1-yr return period installation tanker upstream oil & gas thruster riser system...

... generation rig mauritania drillship upstream oil & gas discovery shallow water red watch circle watch circle disconnect offshore technology conference reaction time operator generation unit drilling operation well program deepwater discovery drilling unit rd generation rig...