... for a Design Pressure (DP) of 20,000 PSI. Design and Analysis iteration was performed to verify the structural integrity of the MQC/J-Plate under the design operational loads (both internal and external loads) with all couplers pressurized to a design pressure of 20,000 PSI and test pressure (TP) of 30,000 PSI...

...-pressure, high-temperature (HPHT) design parameters for Stones. With a targeted design pressure of 15,000 psi, design temperature of 300 °F and nearly 10,000 feet of water depth, an extensive Technology Qualification Program (TQP) was executed to close these gaps. Six workstreams were developed to qualify...

... of the unbonded technology to reach design pressure of 17,500 psi and design temperature of 150°C for static and dynamic applications. armor qualification flexible pipe design capability pipe resistance high pressure offshore technology conference pressure sheath flexible pipe flexible pipe...

... For the purpose of this study, the wall thickness sizing is carried out in accordance with the following guidelines: 8 inch, 10 inch, and 12 inch API 5L [1] X65 and X70 seamless pipes are considered; Design pressures from 15 ksi to 20 ksi and temperatures up to 350 °F are considered; The wall thickness...

... system acceptance criteria swivel design pressure gas lift stress analysis gas injection method enhanced recovery criteria requalification pressure vessel design load combination barg vhp swivel design methodology offshore technology conference design load comparative study ASME...

... operation parallel train design pressure upstream oil & gas control valve separation fpso simulation model floating production system separator control loop offshore technology conference OTC-27853-MS Topsides Engineering by Modular Simulation Models Neda Felorzabihi, Jeffrey Feng, Hoss...

... subsea production equipment riser requirement reliability safety reservoir implementation subsea hipp subsea system design pressure hipp response time hipp OTC-27278-MS Implementation and Challenges of a SIL 3 Subsea HIPPS Robert Hernandez, Rahul Patel, Timothy Attaway, Vinanti Shah...

... deepwater applications are also proposed in the paper. pipe production riser design pressure wall thickness conventionally water depth upstream oil & gas application api rp 1111 strength analysis riser production scr export riser riser configuration top tension scr requirement...

.... In the end, technical solutions and associated ongoing qualification testing to achieve 6? ID production risers for 130°C/17.5 kpsi and 150°C / 20 kpsi design temperature and pressure will be presented. flexible pipe flexible riser design pressure pipe unbonded flexible pipe riser high pressure...

... deepwater pipeline api rp 1111 riser valve internal hydrotest pressure hydrotest pressure design pressure differential pressure guideline external pressure flowline riser system flowline guidance upstream oil & gas 30 CFR PART 250 — Oil and Gas and Sulphur Operations in the Outer...

... layers, and tensile armor anchoring in the end fitting Full scale tests to qualify the pipe structure. The results of tests on two pipe structures, 3.5-inch ID, 280 barg (4065 psig) design pressure for 1600 meters water depth, and 4-inch ID, 294 barg (4265 psig) design pressure for 1500 meters water...

... Abstract An approach is presented for design of production flowlines and risers infields that rely on subsea High Integrity Pressure Protection System (HIPPS)because of high shut-in tubing pressure (SITP). The approach enables aninherently safer design using a design pressure lower than...

... valves are closed at the same time, the maximum surge pressure achieves 282 bar. Both situations indicate that in Salema, surge pressure is higher than the design pressure established, equal to 255 bar. Related to Bijupirá Field, analyses indicated that surge pressure would exceed the design pressure...

... length, a dynamic flow analysis was performed for typical black oil and gas condensate fields to estimate how quickly the flowing pressure rises to the design pressure of the de-rated flowline4. Possible events that can cause flow to stop and result in the pressure to increase from flowing pressure...

... 1111-collapse external pressure gas riser rp 2rd safety factor criterion differential pressure maximum water depth strength design requirement requirement design pressure riser deepwater riser water depth upstream oil & gas pipeline Copyright 2003, Offshore Technology Conference...

... design pressure otc 12122 manifold drillstem/well testing layout upstream oil & gas wellhead platform requirement offshore technology conference design condition material selection operation connector actuator valve walton otc 12122 hpht complex reservoir flowline...

... offshore pipeline background operation dnv local design pressure midstream oil & gas submarine pipeline system design pressure philosophy pipeline limit state design design check incidental pressure thickness requirement strength safety level reliability limit state OTC...

... million cycles the pipe will be subjected to a hydrotest at 1.5 times design pressure to c o n f i the structural integrity of the pipe. After completion of the initial two million cycles the pipe may then be cycled to failure. Riser Description Pipe Design. The main specification of the riser...

... practice in the 1 930's and which loosely relates the maximum hoop stress with the initial yield stress. upstream oil & gas design pressure strength pipe flowline design formula diameter shut-in pressure design method design factor formula pipeline platform burst safety factor...