... systems with considerable CAPEX and OPEX as well as environmental risks. Available all-electric subsea control systems, designed for the oil and gas industry, are not suitable for upscaling the CCUS due to much higher CAPEX investment. During the development of a new series of all-electric Subsea Valve...

... zones without suffering from the pressure difference between the zones. During the downstroke, the fluids entered the pump plunger via the traveling valve while the fluids from annulus will fill the pump chamber above the main plunger via ports. Meanwhile, during the upstroke the fluid entered the pump...

... of the methodology from DNV-RP-A204 in the context of developing and operating a digital asset, as well as learnings from completed and ongoing projects. requirement artificial intelligence upstream oil & gas information management valve digital twin europe government machine learning datasheet...

... summation injection valve application Introduction Artificial lift is a system utilized particularly when a reservoir is unable to naturally flow hydrocarbons from the subsurface to the surface for various reasons, such as a high water cut, a heavy oil reservoir, or insufficient reservoir...

... of lightweight and compact CO 2 -capture technology is especially critical in offshore oil and gas operations, where weight and space limitations present significant challenges. The pilot system encompasses the compact absorption module, desorption module, heat exchangers, pumps, control valves, and a control...

... diagram communication flowrate conformance improvement uae government oilfield injector variation china government water management inflow control device valve directional drilling enhanced recovery differential injection cable remote wireless zonal water injection aicd experiment...

... TotalEnergies and other industry partners is an essential element to further develop the technology and achieve standardization across the industry. brazil government subsea system supplier upstream oil & gas artificial intelligence actuator valve europe government collaboration requirement...

... for the improvement of system stability, increase in production and recovery. A Venturi is coupled to the pipeline-riser system upstream of the choke valve before the topside test separator for severe slug mitigation. Experiments were carried out in a 2 pipeline-riser system which comprises of a 40 m long horizontal...

... affected is piping, that frequently uses nonstructured formats to store the content for both physical and functional attributes of piping specifications, which is then partially replicated into the design tools. These catalogues can reach up to 100 thousand components including pipes, valves, fittings...

... on Shared-Actuation Control (SAC) techniques, intended for the remote control of valves in subsea manifolds. The discussion covers historical aspects, including presentation of real cases of SAC in Brazilian fields of Petrobras, as well as covers a conceptualization for the technique. The formulated...

... conditions. This work represents the first holistic approach to characterize scale build-up in the vicinity of inflow equipment walls. Numerical results are presented in this paper. deposition mockup valve oilfield chemistry geometry scale remediation asphaltene inhibition wax inhibition scale...

... pressurization or depressurization, hydrocarbons detection, leak measuring by control valves, measuring the WTC chambers pressure, collecting the probable hydrocarbons in a safety way and, and if required, actuating some WTC valves. The control valves and WTC chambers are accessed by the Vertical Connection...

... capping stacks in IOGP Report 594, dated January 2019. hydrocarbon gate valve wellbore procedure operational safety valve well control incident blowout requirement bop stack well control contingency planning well control equipment wellhead control incident subsea well relief well...

... valve offshore technology conference upstream oil & gas References References API – American Petroleum Institute ( 2017 , April 1 st ). API SPEC 16A, Specification for Drill-through Equipment , 4 th Edition. API – American Petroleum Institute ( 2018 , December ). API STD 53...

... (ESP), the use of an annulus diverter valve (ADV) to avoid the pressure drop across the ESP in case of failure, etc. The result was a well constructed ahead the planned time with a Productivity Index (PI) that exceeded expectations. pressure loss society of petroleum engineers directional...

...) is injected to prevent hydrate formation. This MEG is recovered at the platform and it is reinjected in the wells. Dosing valves located at subsea manifold distributes the desirable quantity of MEG for each well. During eight years of operation, no production loss caused by hydrate blockage has been reported...

... design requirement production team well integrity acceptance criteria wbe degradation degradation intervention wfm assessment operator decision-making process leakage handover traffic light valve upstream oil & gas wellbore integrity workover wbe risk assessment References...

... Abstract During the last years, a lot of work have been done focusing on development of low shear valves solutions to be applied on petroleum primary process plants. The main goal of the low shear valve is to generate water-in-oil (WiO) and oil-in-water (OiW) emulsions that can be easier...

... reliability, and improved topside space usage. One of the most common failures in DHCI systems is the breakdown of check valves. This issue is significant. Stringent requirements exist for a continuous injection rate above a certain cracking pressure, preventing flow from the injection line to the wellbore...

... completion technologies or safe deployment of completion systems. Case histories pertaining to dropped tools, downhole valves (effects of water hammer/shut-in), next-generation completion systems (fully conformable sand management systems), and safety investigation of post-perforating, completion practices...