... conference engineering subsea system interaction water ingress upstream oil & gas maximum load boundary condition water flow artificial intelligence obstacle simulation time series deck structure fpso silva Schiller , R.V. , Stansberg , C.-T. , Pakozdi , C. , Silva...

... transient simulator differential pressure boundary condition well completion transient near-wellbore reservoir simulator application Computer Modeling Group (CMG) 2017 . Calgary , CMG Mauricio G. , Marcio C. , Abelardo B. , "A coupled Transient Wellbore/Reservoir...

... Abstract A new analytical approach is applied to the riser's equations of motion, aimed at the real-time processing of solutions under hard boundary conditions. Based on this, a mathematical framework is devised, with the objective of supplying practical assistance for challenging riser...

... to evaluate the solid particle size distribution, and these profiles, were the boundary conditions of a discrete phase modeling. The experimental data, coupled with CFD could estimate the scaling rates at high flow rates production wells. The coupling technique constitutes novel contribution...

... medium. Within each homogeneous medium, the solution is analytically represented by an expansion in basis functions (called modes), that are obtained by the solution of the vector wave equation in a cylinder with lossless walls. Boundary conditions are then applied between adjacent segments to ensure...

... pressure distribution eigenfunction reservoir simulation injection boundary condition hydraulic diffusivity equation application multidimensional hydraulic diffusivity equation coordinate system flow in porous media upstream oil & gas otc 24319 source term cartesian coordinate...

... state criteria. This pipe resistance envelope was used to derive an upper limit to sag bend bending moments for the local ILT analysis. This paper presents details of the methodology, discussions and conclusions for the engineering challenge described above. boundary condition piping design tee...

..., 2009). otc 24454 pressure decay mass transfer coefficient pvt measurement enhanced recovery boundary condition gas injection method equation of state experimental data interface variation concentration artificial intelligence fluid modeling oil system co 2 gas concentration mpa...

... design issues are the required clamp distance, radial gap, appropriate boundary conditions at the clamp locations and their effect on the resulting modes and fatigue damage. The riser clamp spacing is usually designed so that no cross-flow VIV occurs and in-line VIV is mitigated: This means...

... Coast, Ghana, etc.) upstream oil & gas otc 22283 validation result jacque schoellkopf salinity high resolution regional ocean model boundary condition validation mean circulation ocean model resolution regional ocean model circulation presal area eddy kinetic energy offshore...

... known at the time of the study so a two-fluid simulation approach using two incompressible gases, with different temperatures, is developed and tested. Here, the downstream choke fluid temperature is set based on the traditional PVT calculation approach. Mass flow rates and other boundary conditions...

... a regular boundary domain. A source term, dependent on position and time, was included in the partial differential equation to represent production and/or injection wells. A general boundary condition is considered to account for a constant pressure boundary, a no-flow boundary (symmetry or impermeable...