... suitable for conversion with minor modifications, those requiring additional information, those needing significant modifications, and those deemed unsuitable for this purpose. This approach provides a user-friendly and simplified initial step for decision-making, particularly beneficial for operators...

... and representative carbon steel pipes to cater for the required design scenarios. Concurrently, an ECA was performed to establish allowable pipeline longitudinal stresses as input to pipeline design for optimization of lateral buckling mitigation measures. This assessment was iterative to define a compromise between...

.... JIP33 specifications were specified in the project Basis for Design (BfD), as part of the standards and requirements selection process. During Front End Engineering Design (FEED), procurement specifications were developed based on JIP33; these were then used as the basis for tendering of Engineering...

... contaminated fields. drillstem/well testing fracturing fluid completion equipment proppant structural geology drillstem testing geologist reservoir completion installation and operations fracturing materials geological subdiscipline requirement hydraulic fracturing mineral offshore...

... the risk of overload and rig blackouts. During wireline logging operations, the auxiliary generator with lower power output was utilized instead of the main generators, which exceeded the power requirements for wireline logging. A monitoring system was implemented to track and evaluate the effectiveness...

... on field conditions. The results of the final design will be presented in this paper, including those related to the iterations necessary to tailor the required mechanical properties to prevent failure caused by stress-related cracking. The self-healing action will also be presented. Upon implementation...

... ] . This connection is used in a Drill Pipe-Based Riser (DPBR) that can be used in a Through-BOP Intervention Riser System (TBIRS) [ 1 ] or in an Open Water Intervention Riser System (OWIRS) [ 1 ] . The design and qualification of the connection while navigating the different challenging requirements from...

... for climate action. To limit warming to around 1.5⁰C as per Paris Agreement, concerted efforts are required to reduce global greenhouse gas (GHG) emission by 43% by 2030 as concluded in 2022 COP27 1 . Recent progress is encouraging with surge of announced CO 2 capture capacity project align as per growth...

... cement property requirement cement slurry strength deepwater construction annular excess tank operation performed globally composition offshore technology conference preparation rig Introduction to Deepwater Cementing A significant portion of production from unconventional reservoirs...

... wax inhibition project management paraffin remediation architecture pipe stalk centraliser specification requirement configuration electrically heat-traced flowline developer recent active heating breakthrough Introducing Electrically Heat-Traced Flowline (EHTF®) Active heating...

... visualization portal information calibration construction revolutionizing construction accuracy model drone representation stakeholder requirement elevation aerial 360 remotely piloted aircraft system integration gcp Introduction Let’s first delve into the background and its connection...

... ) to a pure CO 2 fluid. Dehydration requirements of first fill. The effectiveness that heating the CO 2 or sourcing the CO 2 from a higher temperature source has on mitigating low temperatures. The effectiveness of increasing the initial pipeline pressure through an initial partial pressurization...

... the BHA drive system from an elastomer-based to a metal-to-metal-based push-the-bit RSS system. For wells with a steerable motor application (high DLS requirement in wash-out prone zone), the high-torque performance motor helped boost up sliding ROP, improving the total drilling on-bottom ROP by 24...

... for the conversion of the whole pipeline system to flow with CO2. One of the limitations is the first 10km of pipeline is not meeting RDF requirements. The attractive solution of the conversion whereby most of the pipeline length still can be used, while first 10km length will undergo pipeline rehabilitation...

... Abstract Deep and ultradeep reservoirs are commonly characterized by high temperature and high pressure (HTHP), which poses a severe challenge to well testing operations. The requirement for high-density clear brine drives the overall cost of the well testing operations. There are only a few...

... Abstract Fit-for-purpose Electrical Submersible Pump (ESP) load bearing power cable is deployed inside the production tubing of a sour oil well for an extended period of service. As the highest cost component of a novel ESP deployment system, project economics requires the power cable...

... final phase of the oil and gas production cycle. coda offshore technology conference personnel australia workload nopsema platform infrastructure government building regional capacity operator inventory requirement offshore facility decommissioning decommissioning future...

... the opportunities, cost, and risk of the blending. The feasibility study also evaluating the initial evidence-base that hydrogen can be safely blended into existing natural gas transmission pipeline system at certain volume percentage, without affecting the requirement of gas customers or modifying their appliances...

.... The described carbon capture module design is suitable for applications on new as well as existing offshore facilities. For implementation of the carbon capture modules on typical CPP and FPSO/FLNG facilities, the utility requirements and facility layout design are described in this paper. It is demonstrated...

... resistance cement paste corrosion resistance successful application operation requirement Introduction Heavy oil reserves in China offshore has been proven approximately 4 billion tons, concentrated in the Bohai Bay area. The characteristics of geological reservoirs have brought more severe...