... artificial intelligence standpipe pressure primary surface measurement drilling equipment flow rate bha stator power section equation drill bit pressure profile well construction mud motor surface measurement power only mode physics cavity torque output rpm Introduction Two...

...) integrated with hyperparameter tuning optimization algorithms, including genetic algorithm (GA). To develop the model, 44 datasets are used to predict the CO 2 injectivity change with its influencing variables such as brine salinity, injection flow rate, particle size, and particle concentration...

... of a conventional borehole is generally used = 3740-370n. However, many field practices show that the critical flow rate of turbulent flow obtained by using conventional calculation method is 15%-20% lower than the actual critical flow rate in narrow gap, therefore, when calculating the critical Reynolds number...

... Sulphate (SDS) and Poly Acrylamide (PAM). The effect of the composition of the slug was studied at different concentrations 125ppm, 250ppm, 375ppm, and 500ppm. After that, the effect of flow rate of SP slug on the oil recovery process was explored. Colored non-interacting dyes aided the visualization...

... control technology to achieve intelligent artificial lifting technology and system. Flow Rate Measurement production control production logging fluid dynamics production monitoring flow metering flow rate detection mrmf reservoir surveillance multiphase flow multi-phase flowmeter...

... drillstem/well testing upstream oil & gas flow in porous media history matching exponent posterior distribution flow rate reservoir property algorithm uncertain parameter information production data historical data discrete fracture model water saturation workflow proxy point fracture...

..., in fact, maximize the field's life cycle and increase the Recovery Factor (RF). chemical flooding methods flow in porous media enhanced recovery complex reservoir upstream oil & gas fluid dynamics modeling & simulation waterflooding simulation model flow rate experiment scenario...

... the water control effect of ICD, AICD, and C-AICD and be analyzed based on the recorded pressure and flow rate data. The testing results showed that C-AICD could take advantage of AICD and ICD. It could function as a passive ICD to achieve uniform inflow at the beginning of production, and then function...

... in the hydraulic discipline with the support of engineering integration by TechnipFMC. sustainable development social responsibility france hydraulic fracturing specification produced water management and control sustainability flow rate icube laboratory dellinger energy conservation upstream oil...

... injection scheme, flow rate, brine concentration and initial rock permeability are the principal factors that contribute to the porosity and permeability alteration of the core samples. Moreover, FESEM-EDX analysis of the produced fines shows precipitated salt, silica grain and kaolinite were migrated...

... of displacement processes. In this work, a pore-scale study of two-phase relative permeability in mixed-wet heterogeneous porous media at different capillary pressure and flow rate is presented. Multicomponent Johnson, Bossler and Naumann (JBN) method was employed to determine relative permeability using...

... pump provided the advantage of accurate volume/rate measurement, the modified drawdown chamber setup provided a constant flow rate, to aid in a more accurate fracture closure pressure interpretation. The improved setup was the first successful application of this device for the purpose of Micro-frac...

... or at individual well flowline. MPFMs combine several measurement principles such as Gamma ray spectroscopy, capacitance tomography, microwave, and ultrasound to infer phase flow rates. From PETRONAS experience, there are many instances where the MPFM, especially in subsea installation, failed either prematurely...

... & simulation drilling operation upstream oil & gas oil production dual-lateral well breakthrough inflow control device oil recovery viscosity multilateral well offshore technology conference range 3 flow rate completion fluidic diode aicd reservoir aicd completion aicd application case...

...) and this can be used to enables early detection of losses or of formation influxes. narrow mpd window plastic viscosity drilling fluid property offshore technology conference upstream oil & gas flow rate transient flow transient numerical model transient computation drilling fluid chemistry...

... Abstract In any coring job, a common challenge is to maintain good hole cleaning while using a reduced flow rate to prevent washout of the core samples. Without proper hole cleaning, the hole is exposed to cuttings accumulation which may lead to major problems such as induced losses and stuck...

... on existing facilities. subsea production equipment subsea system control system field performance study current condition offshore technology conference operation connector wgfm contractor upstream oil & gas module valve retrieve data bleed valve voltage sensor flowmeter flow rate...

... rate and water content distributions in different paths, which is then compared with the computational fluid dynamics (CFD) results. Unlike the CFD results, each path has a specific flow rate and water content, and as a consequence, specific flow regime and flow pattern. Both the CFD and model results...

... drillstem/well testing reservoir pressure average reservoir pressure pressure transient testing drainage area production performance productivity index flow rate pressure transient analysis production data initial reservoir pressure straight line analysis technique wellbore pressure...

... results, Guo's model predicts critical flow rate more accurately than all other models. There's no any applicability ranges, which it can be applied to all vertical gas wells with different wellhead pressures. When it comes to the other models, their applicability ranges should be taken into account...