... sand pack. Resin based sand consolidation (chemical sand control) might become an option, as it works for heterogeneous sand, but limited to maximum 16 ft interval based on several field applications in East Kalimantan. Case in Offshore Sepinggan Field; with two open intervals, 3ft and 24ft length...

... the completion is run to depth and the flow passing around the ball stops, the pusher sleeve under the spring load, pushes the ball back onto the ball seat and non-elastomeric ball seal. The application of tubing pressure can then be built up against the ball allowing the operator to pressure test the tubing...

... insights into the capabilities and potential applications of Vibroacoustic Technology in enhancing the safety and integrity of Oil&Gas facilities. Vibroacoustic Technology is a resilient detection system utilized in pipeline networks, onshore and offshore, to identify leakages, impacts, and other...

... system technology conference approach drilling operation machine learning conference abu dhabi twin system utilizing hybrid approach application Introduction The Digital Twin, constructed by integrating a myriad of interdisciplinary approaches such as IoT, sensors, AI, machine learning...

... and submitted to Water-Alternate-Gas injection with CO 2 (WAG-CO 2 ). The results show that the methodology is applicable to real and complex fields. As the three stages can run simultaneously, one can (1) use different model fidelities to improve the quality of the solutions and (2) use model-based solutions...

... Since the introduction of MTM RSC [ 7 ] in 1999, several design variants [ 9 ], [ 10 ], [ 11 ], [ 12 ], [ 13 ] have been developed to improve the pressure ratings and be tailored to fit a specific tubular size or application. This paper will discuss one...

... In principle, digital twin is a term that describes replicating a physical object, process, service, or environment into the digital domain. The solution is a model-based application that simulates both current and historical conditions of a particular asset. These digital models are used...

... production logging production monitoring application constraint neutron partitioned zone y-tool history example water saturation Introduction The Wafra field is located within the Onshore Partitioned Zone (PZ) between Saudi Arabia and Kuwait ( Figure 1 ). It is covering an area of around...

... endothermic. The released hydrogen can then be collected and used for various applications. Metal hydride separation has several applications, and it is often utilized in hydrogen storage systems. Different metal hydrides exhibit varying properties in terms of absorption and desorption characteristics...

... the BHA drive system from an elastomer-based to a metal-to-metal-based push-the-bit RSS system. For wells with a steerable motor application (high DLS requirement in wash-out prone zone), the high-torque performance motor helped boost up sliding ROP, improving the total drilling on-bottom ROP by 24...

... Abstract Application of Enhanced oil recovery methods (EOR) in offshore oil fields are getting more popular with the advancement in technology and chemicals used. Polymer flooding is one of the most successful projects to improve water mobility by increasing the viscosity. Application...

... and gas industry. choke valve drillstem/well testing artificial intelligence drillstem testing completion equipment reservoir surveillance machine learning application information dataset production control algorithm bk-s3-n limitation accuracy incident prediction flow coefficient...

.... , Liu , P. , Chen , M. , Zheng , J. , & Cheng , Y. ( 2015b ). Research and application of while-drilling pressure-monitoring technology in exploration wells of deep water area, Qiongdongnan Basin . Natural Gas Industry , 35 ( 10 ), 99 – 105 . de la Varga M. , Schaaf...

..., it was reported to provide relatively lower formation damage ( Al Moajil et al., 2008 ). However, its high cost remains a limitation of its application. Manganese tetraoxide (Mn3O4) has been shown to dissolve better in citric and lactic acids than in formic and acetic acids ( Al Moajil et al., 2008 ). Core Plug...

... in the overall costs. From several onshore application references, amine-based carbon capture technology is known to require large and tall absorber columns and significant plot areas. Several technology and engineering companies are looking into ways of making more cost‐effective offshore CCS solutions, however...

..., well bore hot washing and so on, because of its limited heat release. Due to its own advantages, high-energy material is suitable for application in heavy oil thermal recovery. Combined with the requirements of offshore oil field, high-energy material A is selected. Moreover, the heat released...

... dataset hydration prediction application presentation accuracy algorithm isolation retarder concentration offshore technology conference operation Introduction Cementing is a crucial operation in the petroleum industry, used for zonal isolation, casing protection, and wellbore plugging...

... by Saha et al. (2019 ) and Dessbesell et al. (2020 ). However, one major challenge in their widespread application is their accessibility and ability to endure diverse reservoir conditions such as temperature and salinity, as highlighted in Bento and Moreno's (2016 ) study. Despite the potential...

... be implemented within a year from the outset of a feasibility study. However, the technology is not appropriate for all situations due to differences in slugging nature and other subsurface issues and therefore its applicability needs to be evaluated on a case-by-case basis. With increasing number of aging...

... Abstract The application of Electric Submersible Pump Systems (ESP) in harsh reservoir conditions such as high fluid viscosity (extra-heavy oil), high bottom hole temperatures, and high free gas content, represents technical and economic challenges due to low overall system performance and high...