... its position at a defined angle during the experiment. Since the goal is to model a real platform of dimensions 30 m x 20 m, the respective scaled dimensions are 3 m x 2 m in plan for the Mock-up floors. To ensure a good experimental result, the height of the sensorized floor is about 1.25 m from...

... that aretest setup is shown in Figure 1 together with the coordinate systems (CSs) used in the experimentused in the experiment. (a) (b) FigplaAorm mo=on and rotor forces.1: (a) Experimental setup in the PoliMi wind tunnel. (b) geometry of the wind turbine and coordinate system for platform motion (CS1...

... change investigation cement sheath separation exposure integrity pathway experiment carbonation propagation alteration mineralogical investigation interface calcium carbonate precipitation slurry A CUTTING-EDGE APPROACH IN CEMENT TESTING FOR CARBON CAPTURE AND STORAGE APPLICATIONS Fabio...

... and the experimental setup is provided. Integration of MDSplus and MARTe2 Integration of MARTe2 and MDSplus could results in a sophisticated tool allowing the complete management of a fusion experiment such that MDplus provides the full description of the experiment including devices and data while MARTe2 provides...

... wt% percent above the critical micelle concentration (CMC). The CO2 and N2 gases with more than 99 % purity are used for the experiments. 3 Experimental Procedure The following stepwise procedure is adopted for performing the core flooding experiments: 1. Initially, all the solutions of formation...

... Fig. 4 A) Batch reactor used for the experiments; B) Time elapsed from the beginning of the eperiment vs total pressure at 110ºC; C) Cation content of experimental liquids reacted with the sample powder at 110ºC and different duration (6-48-120 hrs). FUTURE APPLICATIONS UPSCALING OF CO2...

... experiment to a safe and unlimited power generating technology. Introduction Nuclear fusion energy is the holy grail of scientists and engineers working to find a sustainable way to produce electricity abundantly and at low cost. The International Thermonuclear Experimental Reactor (ITER...

...) comparison between experimental and model pH values ML models use historical data to extract useful statistical correlations. Data are to build ML solutions, several experiments were used to build a data lake to train the ML models. For each experiment we have both online and offline measurements. The first...

... be disregarded or even beneficial, but there is no indication. Experimental data are thus much needed for a variety of cases under appropriately chosen conditions. Specific knowledge could be also provided by Machine Learning algorithms applied to the results of experiments or partial model calculations (again...

... on the -OTDR technology is proposed. The experimental platform is established in the laboratory and some trials have been performed in the field over a pipeline length of 180 km in Yakutia (RU) and in well. Both the laboratory and in-field experiments proven the validity of the optical sensing technology...

... tunnel-like setting. The experiments themselves, which involve controlled releases of air and gas mixtures, have to be designed accurately as well as the sensors network. The paper proposes the progress of the experimental setup, highlighting the faceted and challenging design issues related to the final...

... this framework the paper shows decomposition experiments of a heavy oil analogue (phenyldodecane, PDD) in presence/absence of water and/or diethyldisulfide, using a combination of confined pyrolysis experimentation and automated reaction network modelling. PDD and mixtures of PDD with diethyldisulfide (DEDS...

... loss of productivity, increasing of Energy spent and CO2 emitted etc. in a piping with leakage. The value of around 0.5 mm is also comparable with leak utilized by (Brunner and Barbezat, 2006) in their experiment with aluminium piping 275 mm long. 3 EXPERIMENTAL APPARATUS In order to perform the tests...

... for a selected range of input parameters. In practice, a proxy could be modelled as a polynomial regression (typically a polynomial of second order in the uncertainty variables) or with another interpolation method like Kriging, starting from a reduced number of experiments ( experimental design ) designed...

... can then be employed for the characterization of relative permeabilities. The three-phase Steady-State relative permeability experiments have been conducted by resorting to a dual energy X-Ray methodology. The experimental setup also includes a closed loop burette system to validate and support...

... deviation experiment 1 INFLUENCE OF ALKALI AND SURFACTANTS ON NEAR-WELLBORE- AND RESERVOIR VISCOSITIES OF POLYMERS FOR EOR APPLICATIONS T. Gumpenberger, D. Zabel, T. Clemens, OMV E&P GmbH This paper was presented at the 12th Offshore Mediterranean Conference and Exhibition in Ravenna, Italy, March 25-27...

... For the counter/co-current transition we have seen that an l value equal to the length L of the core yields a good agreement between theory and experiment. In other words, quantity 2k/(rL) seems to predict the average Bond number at which the separation between region 1 and region 2 is experimentally observed...

... to reproduce the experimental time-dependent behaviour. - a study of viscoelastic properties : creep compliance tests at constant low shear stress and dynamic experiments have been performed. Oscillatory data were deduced from creep curves - without actually vibrating the clay dispersions - because a periodic...

... pilot are presented. Then the experimental setup is covered followed by a discussion of the results. Field Rese The Aust The furthe origin of tig be lo The Aver the v Prod The wate to im Curre rate time abou In 20 spot incre Nove wells conc Descript rvoir locat reservoir u ria, approxi reservoir co r...

... in North Sea and Arctic offshore areas, and to improve scientific knowledge on the sensitivity of Arctic species to dispersed crude oil and produced water compared to the North Sea species. The BioSea demonstrated, through laboratory experiments with living organisms and field surveys, the relevance...