... sustainability social responsibility electricity sustainable development electricity production category consumption electricity mix available online contribution italian electricity mix production process impact category electricity production process environmental impact...

... impact. However, the production and installation phases contribute notable environmental burdens, requiring comprehensive assessment, for potential targeted improvements. This paper presents a Life Cycle Assessment (LCA) of a polycrystalline silicon (poly-c-Si) PV panel, focusing on its production...

... radiometer contribution DEFINITION OF THE OPTIMAL SOURCE FOR CURING AN UV COATING ON THE INNER SURFACE OF PIPES Alessandro Condini, Carlo Trentalange, Elixe srl, Viktor Morozov, MPR srl. This paper was presented at the 16th OMC Med Energy Conference and Exhibition in Ravenna - Italy, 23-25 May 2023...

...-life example, related to an Italian geographical island, is proposed to show how Battery Energy Storage Systems (BESS) could support the microgrid stability incrementally to the simple hourly energy balance contribution. microgrid sustainable development strength europe government generator...

... zones, understanding the contribution of individual oils to the overall production, or evaluating the compartmentalization within the reservoir by resolving the heterogeneity of the reservoir rocks, are to name but a few. Formation evaluation challenges are mostly attributed to formation heterogeneity...

... controller contribution control system social responsibility economic contribute hull disturbance torque matrix control parameter robustness equation algorithm cost function sustainable development renewable energy model predictive control trmpc gyroscope sea condition AN APPLICATION...

..., detailed numerical results of the estimation cannot be shared due to confidentiality reasons. The charts below show the contribution, of each project phase and asset, to the overall emissions estimated for the project. Reported below in Fig 4: and Fig 5: the results of the estimation in terms...

... brought by technological innovation, and measuring the contribution to decarbonisation generated by a Global Solution Provider, such as Saipem. A first of a kind methodology dubbed TechInnoValue was developed together with Politecnico di Milano, to map the elements of value-creation strictly depending...

... subsea system fpso risk management artificial intelligence operational safety floating production system contribution ukooa correlation flash fire scenario floating production storage & offloading frequency substance immediate ignition probability failure case cloud upstream...

... of methane from flaring activities. The combustion efficiency is the main factor influencing this contribution. Flaring emissions may also be split into Routine/Safety and non-routine flaring, according to the specific process to which they are related. Stationary combustion is the component of methane...

... the escalation to major hazards. This technique is particularly effective since it allows to identify and eventually quantify the contribution of both prevention and protection barriers on the installation. Fig 3: Example of Bow-Tie diagram Once bow-ties have been generated, the frequency analysis is performed...

... production started in 1984. The historical and main producing oil formation is Bahareyia, a shallow reservoir composed of unconsolidated sand layers with gross thickness of 50 ft and oil density ranging from 30°- 40° API. However, the deep reservoir targets have improved their contribution in the last years...

... application reservoir characterization oilfield chemistry cutting scavenger corrosion inhibition production chemistry upstream oil & gas thermochemical sulfate reduction contribution permeability hydrocarbon gas interstitial gas analysis interstitial gas detection 1 H2S DETECTION WHILE...

... in a laboratory, and the results are presented in an analytical report. Tracer technology allows for the comparison of the relative contribution of the traced fluid from one stage to the next, comparing not only the contribution amongst stages but also amongst each stage s three different phases (liquid...

... for the momentum exchange contribution among phases across the interface. In the contest of the Eulerian-Eulerian model, the closure relation is generally reported as the sum of drag force, virtual mass force and lift force. Since the dispersed phase is modelled as a solid sphere of small diameter and without...

... coming from different productive levels/wells are mixed. Monitoring and allocating contributions of different fluids are key aspects to optimize production: in particular, allocation refers to the practice of splitting wellhead-measured quantities of commingled oils coming from the different sublevels...

..., continuous monitoring by water injection was the key for proper reservoir management and recovery optimisation. Several problems had to be tackled such as: 1. layered reservoir having different permeability s (ranging from 100-1500 md) and different contribution of layers which make the production allocation...

.... DynaP is able to identify, day by day, the contribute of Technical Downtime, starting from a well level analysis until to evaluate the influence of reservoir natural decline and the effect of shifted actions/investments. DynaP's Algorhytm is based on a mobile average, properly modified in order to take...

... which zones were effectively contributing to oil and water production. Permanent water tracer systems were installed aiming at detecting the onset of early water breakthrough. After water break-through has occurred, a regular sampling program is performed and samples analyzed to identify the location...

...SUSTAINABLE DEVELOPMENT IN MARINE ENVIRONMENTS CONTRIBUTIONS TO THE DEVELOPMENT OF A BIODIVERSITY ACTION PLAN C.?A. Cova, eni e&p, L. Bracco, E. Bjørnbom eni Norge, S. Cochrane, Akvaplan-niva This paper was presented at the 10th Offshore Mediterranean Conference and Exhibition in Ravenna, Italy...