..., geochemical, biostratigraphic and geophysical data. This work gives an overview of these integrated G&G technologies and presents two Mediterranean case histories: the first is from north Africa offshore, where well data were available for the various geophysical methodologies calibration; the second...

... the behavior of the producing well in the platform, the 30 km sealine and, consequently, the separator. reservoir surveillance early production system production monitoring separator production control upstream oil & gas separation and treating flow metering calibration integrated fiscal...

... Ratio, Density). These properties are derived from seismic partial- stack data by applying a Seismic Reservoir Characterization (SRC) workflow based on Extended Elastic Impedance (EEI) inversion and a multi attribute linear calibration. The resultant 3D model provides a comprehensive description...

... throat size distribution and to separate micro from macro porosity. The integration of these information with NMR, acquired on the same core, allows to calibrate the most efficient T2 cut-off, discriminating movable from the unmovable fluids. The final outcome is a robust link between reservoir...

..., sampling points, frequency and parameters updating is examined. Calibration and proving Is valuated if the calibration is performed by personnel who have the required skills and tools. The calibration procedure shall be traceable: instrumentation used during the calibration 9 process must have...

... log analysis porosity upstream oil & gas composite plot investigation sequence resistivity calibration resistivity curve acoustic image frequency laterolog tool coates permeability well logging borehole image stoneley wave slowness calculation evaluation 1ADVANCED LOGGING...

... management, Calibration and proving, Maintenance. The approach has been engineered and successfully applied in several external campaign. Its major strengths are easiness of integration with local field operation and the use of customized instruments for measurement system analysis: Predictive instrument...

... with these models demands a constant C value (non-varying mineralogy) as well as partition of the non- movable fluid fraction for the Timur-Coates model. Although worldwide experience of permeability calculation using the two models yields standard constants, a core calibration is mandatory for their reliable...

... risks (changes in mud rheology, poor hole cleaning and drill pipe corrosion), thus avoiding the onset of immediate operative issues (cost savings and NPT). Furthermore, even with heavy losses, the new MicroGC detection system, via the Helium used as a calibration gas, enables for safe (inert gas...

... geometry, waterdrive strength, and hydraulic and geomechanical parameters characterizing the geological formations of interest. These uncertainties can be resolved, or at least reduced, with the calibration of the geomechanical model against the interferometry measurements by the use of metamodeling...

... as accurately as possible, a process which usually requires the reanalysis of historical meteorological data by experienced Meteorologists with the aid of calibrated objective analysis procedures and/or models. The wind fields are used to drive calibrated ocean response models (e.g. a spectral wave model, storm...

... allowed a very compact dimension: 1.8m in length and 1.5m in height. The meter was installed on February 2006. A preliminary set of test was made by injecting known quantities of liquid during the normal process. The results obtained without performing any type of calibration were excellent: The meter...

..., which contributed to the successful completion of the Blue Stream Pre-Engineering and Abyssal Plain Survey. procedure remotely operated vehicle strategic planning and management polar prince pipeline route mobilisation calibration project management sensor data acquisition survey...

... by distorted flow profiles and swirl, – can perform bi-directional measurements; – gives much information on the flow profile over the cross section of a pipe. – has no moving parts and therefore no wear and – is nearly maintenance-free as e.g. frequent and costly periodic calibrations or re...