...Paper No. Association for Materials Protection & 16174 Performance Processing Temperatures & Mass Loss of Vapor Corrosion Inhibitors Seckin Ozol Transhield Inc. 2932 Thorne Drive Elkhart, IN 46514 USA Na Qi Transhield Inc. 2932 Thorne Drive Elkhart, IN 46514 USA ABSTRACT Vapor corrosion inhibitors...

... Abstract Proper maintenance of pipelines reduces the occurrences of failures due to internal corrosion to a remarkable degree. Primarily, the two methods employed in maintaining a pipeline are mechanical cleaning (pigging) and chemical treatment, (corrosion inhibitors & biocides) often...

... Abstract The combination of phosphorus and zinc is mainly used as the carbon steel corrosion inhibitor for cooling water systems in the industrial plants such as petroleum refining or petrochemical plants. Moreover, treatments with high-concentration phosphorous and zinc are also applied...

... materials and corrosion flowline corrosion Upstream Oil & Gas Subsurface Corrosion corrosion inhibitor water management well integrity Pipeline Corrosion riser corrosion corrosion rate texas 77084 oxygen scavenger mpy corrosion behavior steam generating system corrosion test...

... ABSTRACT It is well known that the inhibitor efficiency is encumbered by many variables, such as temperature, pressure, pH, flow speed and chemical composition of the production fluid. Salt content of formation water varies dependent on the location and sometimes exceeds more than 10...

... ABSTRACT The novel indolizine derivative inhibitor for acidizing shows an effective corrosion inhibition without the synergism of propargyl alcohol. The inhibitive indolizine derivatives were generated from BQC (Benzyl Quinolinium Chloride, a commonly used key compound in acidizing inhibitor...

... dynamic simulation. The adsorption of APs on the surface of N80 steel obeyed Langmuir isotherm. Potentiodynamic polarization study confirmed that inhibitors are mixed type with cathodic predominance. Molecular dynamic simulation was applied to search for most stable configuration and adsorption energies...

... precipitation Publication Division precipitate Houston dosage asphaltene inhibition mg 2 PPM silicate inhibitor adjustment silicic acid manuscript acid bhmtpamp molybdate-reactive silica Control of Metal Silicate Scaling by Chemical Additives Konstantinos D. Demadis,1 Argyro Spinthaki,1...

... ABSTRACT This paper will outline the development of a new Yellow Metal corrosion inhibitor with improved corrosion control capabilities when compared to traditional triazole technology. A four-year R&D effort has led to a new patent pending molecule that develops a thicker, more robust...

... Phenylalanine derived Zwitterion as novel Corrosion Inhibitor for Mild Steel in 1M HCl: Electrochemical, Surface and DFT studies Jiyaul Haque Department of Chemistry, Indian Institute of Technology (Banaras Hindu University) Varanasi -221005 India MA Quraishi King Fahd University of Petroleum...

... of the system, during and after testing become a major concern, therefore, application of inhibiting system is required. Vapor-phase corrosion inhibitors (VCI), can be added to water in small concentrations to prevent corrosion during testing, or wet storage and after testing. These inhibitors are to prevent...

... ABSTRACT INTRODUCTION oxygen scavengers (to reduce amount of oxygen) biocides (kills and prevents bacterial growth) corrosion inhibitors (used to inhibit general form of corrosion) materials and corrosion Upstream Oil & Gas inhibitor Pipeline Corrosion flowline...

... ABSTRACT Corrosion inhibitors are widely used for prolonging the lifetime of oil production facilities. In practice, it is important to quickly screen the effectiveness of a certain kind of corrosion inhibitor before its use in a target environment. However, the evaluation is actually quite...

...) and several synthetic homo- and copolymers containing a variety of functional groups has also been studied. The results indicated that performance of additives tested strongly depends on the inhibitor architecture. Based on the data collected, the additives may be ranked as follows: homo- > bio...

... Influence of Structural Features of Scale Inhibitors on the Control of Silica Scaling Konstantinos D. Demadis, Argyro Spinthaki, Georgia Skordalou, Ioannis Aristodemou, Aikaterini Zepou Crystal Engineering, Growth and Design Laboratory, Department of Chemistry, University of Crete, P.O. Box 2208...

... Development of Combined Corrosion and Scale Inhibitors P. Mékarbané, D. Alonzo, F. Moser, G. Larrouy ARKEMA Centre de Recherche Rhône-Alpes Rue Henri Moissan, BP 63 69310 PIERRE BENITE, FRANCE ABSTRACT There is a growing demand for combined Corrosion Inhibitors (CI) and mineral Scale Inhibitors...

... Aggregation and Adsorption Behavior of Organic Corrosion Inhibitors studied using Molecular Simulations Himanshu Singh, Yathish Kurapati, Sumit Sharma(1) Department of Chemical and Biomolecular Engineering Ohio University Athens, Ohio 45701 ABSTRACT We have performed all-atom classical molecular...

... characteristics, including flexibility and hydrogen bonding capacity. Both inhibitors acted as nucleation and as crystal growth inhibitors Keywords: calcium sulphate dihydrate, gypsum, precipitation, kinetics of, phosphonates inhibition INTRODUCTION The formation of calcium sulphate deposits occurs in a wide...

... that performance of polymers as CaOx inhibitors strongly depends on polymer architecture and type and charge of comonomers. In general, polymers containing carboxyl group perform better than co- and terpolymers containing hydrophobic and bulky comonomers. Analysis of XRD, FT-IR, and SEM data on the crystals grown...

...Effect of Alkyl Tail Length on CMC and Mitigation Efficiency Using Model Quaternary Ammonium Corrosion Inhibitors Negar Moradighadi, Starr Lewis, Juan M. Domínguez Olivo, David Young, Bruce Brown, Srdjan Nesic Institute for Corrosion and Multiphase Technology Department of Chemical & Biomolecular...