... flowline corrosion production chemistry upstream oil & gas materials and corrosion riser corrosion corrosion management corrosion inhibition oilfield chemistry well integrity coating system retrieval system permission ampp nace tm 0404 coating material protection...

... corrosion of flange faces observed. Therefore, in order to mitigate or prevent such corrosion in modular construction, countermeasures should be taken. In this paper, two means of mitigating or preventing flange face corrosion in tightened flanges (i.e., a rust preventive coating and a special spiral wound...

... Charter Coating Service (2000) Ltd. Enbridge Employee Services Canada Inc. #6, 4604-13th Street N.E. 10175-101 Street Calgary, Alberta, T2E 6P1 Edmonton, Alberta, T5J 0H3 Canada ABSTRACT Lining the floor bottoms and vapor space within an Aboveground Storage Tanks (AST) is a well-proven method to mitigate...

... Abstract Recently, a power company identified their current procedures for corrosion protection with industrial coatings of pipe cable sections as an opportunity for process improvement. The power company sought to decrease the difficulty of maintaining coatings on these assets, increase...

...-P coatings is inhibited due to fracture and cracking by the impact of erosive particles in the process streams. This study involves the preparation of graphene incorporated Ni-P coatings by adding various concentrations of graphene in Ni-P plating bath under stirring conditions. The solid particle...

...Paper No. Association for Materials Protection & Performance 16267 A Modified CPE Model to Fit EIS Data for Protective Coating Evaluation Bing Yuan Muni Ramakrishnan A.W.Chesterton A.W.Chesterton 860 Salem St 860 Salem St Groveland, MA 01834 Groveland, MA 01834 USA USA Martin, Stephen...

... Abstract Third Generation Polysiloxane (TGPS) ambient curing CUI mitigation coatings have been used in the petrochemical industry for over five years. These coating technologies have demonstrated positive results in both shop and field application for asset management in elevated temperature...

... ABSTRACT Aluminide coatings were produced by halide-activated pack cementation (HAPC) and halide-activated slurry cementation (HASC) on Ni-base superalloys (UNS N07208, UNS N06230, and UNS N07718). Both HAPC and HASC are in situ chemical vapor deposition processes activated by halide salts...

..., and Al based nanocrystalline metal alloy coatings.1 3 that provide protection to corrosion prone materials such as Al, Cu, Fe and Mg. Herein we present structural, mechanical and immersion corrosion properties of a newly developed nanocrystalline NiMo alloy and provide comparisons to pure Ni...

... ABSTRACT The geothermal industry is one of the most challenging extraction and production industries that require the use of many engineered coatings solutions both in design and materials with the right cost/performance ratio. Though not widely used in geothermal wells and plants, another...

... ABSTRACT Nanostructuring enables ordering of nanomaterials to achieve a desired property or synergistic effect in which the minimum percolation threshold is obtained. The coatings needs of the power industries, varies from operation-to-operation. Formulation of protective coatings are often...

... ABSTRACT To mitigate the effect of highly corrosive water injection media (aquifer water), which has a very high total dissolve solid (TDS) value with high oxidizing agents, internal fusion bonded epoxy (FBE) coatings, in addition to corrosion inhibitor were used to provide internal corrosion...

... environment. The aluminized specimens were characterized using X-ray diffractometry (XRD), optical microscopy and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Coating thickness, structure, phase identification and elemental compositions were obtained using these techniques...

... ABSTRACT Coatings have the function of resistance to environmental attack, i.e. barrier protection, abrasion and chemical resistance, yet a number of them have not been optimized against wetting when it comes to dual or enhanced properties and durability at higher temperatures and pressures...

... via ABSTRACT Galvanic corrosion is a serious issue that affects all aircraft platforms within the Naval Aviation Enterprise. Due to tolerance constraints or other design limitations, deposition of a metal film as a sacrificial coating is utilized as a method of protection. One such process...

... ABSTRACT With the broad use of three layer polyethylene (3LPE) coatings for external corrosion protection of oil and gas pipelines in the world, more and more failures mainly relating to coating adhesion problem were observed. Substantial on-site failure case studies and investigations showed...

... ABSTRACT Blisters are one of the most frequently observed failure modes in FBE coatings of buried pipelines. Initial small disbondment defects at the coating-steel interface, due to embedded abrasives and voids are potential sites for blisters to form and grow. Two types of blisters...

... ABSTRACT Nanotechnology involves scale, function, and composition that enable macroscopic properties with improved performance and high-value adding for any industry including the coatings industry. The large interest in graphene-based materials and other carbon-based polymorphs...

... water content corrosion flowline corrosion riser corrosion corrosion rate wall shear stress permission Houston flow loop erosion-corrosion behavior surface morphology morphology different temperature corrosion morphology coating corrosion product manuscript Evaluation of Erosion...

... corrosion indirect assessment step coating direct assessment Bayesian network model permission assessment step Application of Probabilistic Model in Pipeline Direct Assessment Shan Guan, Francois Ayello, and Narasi Sridhar DNV GL, 5777 Frantz Road Dublin, OH, 43016 U.S.A. Xiaoming Han...