The compatibility of fueling infrastructure elastomers and plastics in bio-oil and diesel fuel was determined by measuring the volume swell. The bio-oil was produced via fast pyrolysis of woody feedstocks. The elastomer materials included fluorocarbons, acrylonitrile butadiene rubbers, neoprene, polyurethane, neoprene, styrene butadiene (SBR) and silicone. The plastic materials included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), POM copolymer, high density polyethylene (HDPE), polybutylene terephthalate (PBT), polypropylene (PP), polyethylene terephthalate glycol (PETG), polythiourea (PTU), four nylon grades, and four thermosetting resins. The majority of the elastomer and plastic materials exhibited higher volume expansion in bio-oil than in diesel. These elastomers and plastics had high polarity values which more closely align with the polarities of the bio-oil versus the diesel fuel. Conversely, SBR, silicone, HDPE, and PP are relatively nonpolar and this matches the low polarity of the diesel fuel, which resulted in higher volume expansion in diesel, rather than the bio-oil for these four polymers.


This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energv.gov/downloads/doe-public-access-plan).


Fast pyrolysis-derived bio-oils are being evaluated as a renewable fuel for use in transportation, home heating, and energy production. Fast-pyrolysis consists of rapid heating (around 1000°C/sec) of biomass feedstock in the absence of oxygen. Liquid yields may reach 75% depending on feedstock type, reactor design and other processing variables. The resulting oils have high viscosity and water content relative to petroleum distillates. Because the feedstock is biomass (typically pelletized wood), these fuels provide a pathway toward reducing the dependency on foreign petroleum, while utilizing a cleaner, and renewable, resource. Bio-oil derived from fast pyrolysis of woody feedstock is being investigated as an alternative fuel. In order for these fuels to become acceptable and common, it is necessary that they are compatible with existing fuel systems and the associated infrastructure materials, both metals and polymers. The chemical profile of these fuels depends on the feedstock and can vary considerably (even among tree species). As a result, the composition of these oils can vary widely, but they usually consist of significant quantities of phenols, ketones, and other oxygenates (including short-chain carboxylic acids).

This content is only available via PDF.
You can access this article if you purchase or spend a download.