Abstract
Alternate current (AC) corrosion is a frequent problem where pipelines share right of way with high power transmission lines, AC powered railed system, and structural components on subsea power units. The magnetic field produced by transmission power lines and AC power generators and converters induces an alternate electric current on the buried pipe; the magnitude of the induced AC being proportional to the voltage and separation distance. It has been reported that AC corrosion can occur even when the cathodic protection (CP) criteria is satisfied, highlighting the fact that AC interactions are not well understood. In the present work, corrosion rates of carbon steel samples in sodium chloride solutions with and without AC at different DC bias potentials were obtained by both electrochemical techniques and weight loss analysis. Results are compared and discussed together with polarization curves to obtain an assessment of electrochemical techniques, which are commonly applied for evaluation of AC induced corrosion. A correlation between corrosion rates obtained from weight loss and electrochemical techniques was obtained by comparing corrosion current densities estimated from weight loss values with those from polarization curves. These results are discussed in the context of differences in the anodic and cathodic Tafel slopes. Additionally, solution analyses were conducted during the test to quantify the ferrous/ferric ion content and solution pH. Stirring and continuous solution replacement were necessary to maintain a constant ferrous/ferric ion content and pH.
