Skip Nav Destination
All Days
Efficiency Of Concrete Coatings On Chloride-Induced Corrosion Of Reinforced Concrete Structures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Application Of Computational Modeling To Predict The Effectiveness Of Cp On A Pccp Transmission Pipeline
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Modelling The Rate Of Deterioration Of Reinforced Concrete Structures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Stochastic Modeling of Service Life of Concrete Structures In Chloride-laden Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Response of Protective Current to Environmental ConditionsDuring Hybrid Anode Concrete Repair Treatments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Initiation Projection For Reinforced Concrete Exposed to Chlorides - Part I: Black Bars
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
An Alternative Approach to Modeling Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Chloride-Induced Corrosion of Reinforcing Steel In Concrete: Electrochemical Modeling of Initial And Limiting Corrosion Rates
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Initiation Projection For Reinforced Concrete Exposed to Chlorides - Part II: Corrosion Resistant Bars
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Behavior of ~9% Cr Steel Reinforcement In Concrete
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Inspection, Diagnosis, Materials And Processing Methods To Repair The Commercial Deck In Puerto Quetzal Guatemala
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Multi-Zone Cathodic Protection Monitoring For Bridge Applications
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Condition Assessment And Repair of Earthquake And Corrosion Damaged Pre-cast, Pre- Stressed Concrete Building Support Piles - A Case History
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Case Studies of Concrete Repair And Strengthening of Coal Storage Silos In Eastern Australia
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Factors Affecting The Corrosion Rate At Intersection Points Of Steel Rebar Mat In Reinforced Concrete Structures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
An Experimental Approach For Evaluating Marine Exposed Reinforced Concrete Substructures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Bolt Corrosion Prevented By Corrosion-Inhibiting Spray-On Thermoplastic
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Studies Of Different Metal Coatings For Automotive Exhaust Applications
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Behavior of Air Plasma Sprayed Alloy 625 On Nickel Foam Substrate
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Electrochemical Properties During Film Degradation Of Coated Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of Acid Concentration On the Microstructure of Anodized Aluminum
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Study Of Diffusion Ions And Water In Powder And Liquid Epoxy Coatings Of Pipeline With Using Fluorescence Microscopy And Afm Methodology
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Disbonding At High Temperature
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of Compatibility Between Thermal Insulator, External Coating, And Cathodic Protection At 150ºC
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Residual Stresses In 3Lpp Pipeline Coatings
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Interfacial Adhesion Of Fbe Pipeline Coatings By The Notched Coating Adhesion Test
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Update On High Temperature Testing Of Pipe Coating
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Accelerated Aging of Fusion Bonded Epoxy Coatings
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A New Application Process That Assures Good Adhesion of Fusion Bonded Epoxy Coatings Exposed to Very Severe Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Polypropylene Coatings For High Temperatures And Thermal Insulation Of Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Advances In Damage Resistant Coating Technology
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
New Development of a High Tg FBE Coating
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of Coating Formulation On Crack Resistance of Epoxy Coatings
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Coatings And Chemical Inhibitors For Aged Pipelines In the Canadian Oil Patch
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Design Of An Internal Onshore Coating System Qualification Program For Tubular Goods
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Low Temperature Mechanical Properties of Passive Fire Protective Coatings
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Review of the Robustness of Epoxy Passive Fire Protection (PFP) to Offshore Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Influence Of Applied Potential And Temperature On The Cathodic Disbondment For Offshore Structures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Progress of Newly Developed Fluoro-polymer Topcoat Systems- Weathering Performance And Track Records Since the 1980's-
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Fast Curing Polycyclamine Cured Tank Linings
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Laboratory Test Methods For Offshore Coatings - A Review of a Round Robin Study
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Effect of Water-Soluble Salt Contamination On Coating Performance
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Effect of Substrate Topography On Cathodic Delamination
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of High Temperature Cracking Risk Of Stainless Steels In Presence Of Zinc Silicate Primer
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Protection System For a 10 Inch (254 Mm) Diameter, 170 Km Long Slurry Pipeline With a Three Layer Coating System In the Mountains of China - A Case History
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Fallibility Of Data Using Permanent Reference Electrodes
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Economic Benefits, Applications And Innovations For Battery-Powered Remote Monitoring
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Retrofitting Concentric Circles MMO Anodes For Impressed Current Cathodic Protection System In Tank Farm
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
ICP-DATA: In Situ Data Collection For Cathodic Protection Design
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Bouri Field Platforms, Libya. Review And Statistical Analysis Of Cathodic Protection Inspection Data
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Protection Behavior of API X-52 And API X-65 Steels Buried In Natural Soil
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Protection Retrofit of a Spar Platform
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Protection Of Stainless Steel Piping And Components - A Review Of Experiences Related To Seawater Systems With High Temperatures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects From Alternating Current On Cathodic Protection Of Submarine Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Sacrificial Anodes For Protection Of Seawater Pump Caissons Against Galvanic Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Study On the Cathodic Protection Scheme In Oil And Gas Transmission Station Based On Numerical Simulation
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Computer Modeling Of A Sacrificial Anode Cathodic Protection Design For Marine Steel Pipe Piling
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Optimization Of Retrofit Cathodic Protection (Cp) Systems Using Computational Modeling By Evaluating Performance Of Remnant And Retrofit Cp Systems, Taking Into Account Long-Term Polarization Effects
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Crude Oil Chemistry Effects On Inhibition Of Corrosion And Phase Wetting
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Inhibitive Properties Of Crude Oils: Can We Count On Them
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Inhibitor Efficiency Limits And Key Factors
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Understanding And Quantifying Corrosion Of L80 Carbon Steel In Sour Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Completion Tubing Optimisation Meeting The Challenge Through Prediction And Operational Experience
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Discussion Of The History And Relevance Of The CO2/H2S Ratio
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Well Integrity And Corrosion Analysis Techniques Applied To Tubular Design And Remaining Life Extension Of Gas Production Wells
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
CO2 Corrosion Resistance of Steel Cord Reinforced Thermoplastic Materials For Flexible Pipe Systems
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
CO2 Corrosion Prediction Along The Length Of A Flow Line
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Predicting Iron Production From Sweet Gas-Condensate Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Transport of Dense Phase CO2 In C-steel Pipelines - When is Corrosion an Issue?
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Novel And Rapid System To Analyze Brines For The Optimum Functional Dose Of Corrosion Inhibitor
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of FeCO3 Supersaturation And Carbide Exposure On the CO2 Corrosion Rate of Carbon Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Compare The Corrosion Resistance Of 3%Cr Steel With Api X65 Pipeline Steel In CO2 Corrosion Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Study On Factors Affecting Low Cr Alloy Steels In a CO2 Corrosion System
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Steady State CO2 Corrosion - A Novel Testing Approach
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Thermodynamic Prediction of FeCO3/FeS Corrosion Product Films
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of O2 And Temperature On Sour Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Simulation of Solid-State Growth of Iron Sulfides in Sour Corrosion Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects Of Temperature And Partial Pressure On H2S/CO2 Corrosion Of Pipeline Steel In Sour Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Laboratory Study of Sour Localized / Pitting Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion At Higher H2S Concentrations And Moderate Temperatures
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Guidelines When Conducting Hydrostatic Pressure Tests And Management of Extended Dwell Times Through Dry/Wet Lay-Ups
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Experimental Study Of Black Powder Formation In Field Teg Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Black Powder Formation In Thin Water Layers Under Stagnant Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A New Methodology For Monitoring Corrosion Under Sales Gas Conditions Using The Quartz Crystal Microbalance
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Laboratory Simulation of Black Powder Formation In Flowing Gas With Water Condensation
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect Of Sales Gas Pipelines Black Powder Sludge On The Corrosion Of Carbon Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Analyses Of Black Powder In Natural Gas Pipeline
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Black Powder Movement In Gas Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Affect of Black Powder On Inline Inspection Accuracy
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects Of Reaction Kinetics Of H2S, CO2 And O2 On The Formation Of Black Powder In Sales Gas Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Development Of New Corrosion Inhibitor To Prevent Black Powder Formation Using Quartz Crystal Microbalance Technique
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Black Powder Inhibitors - Performance Study
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect Of Titanium Content On Hydrogen Induced Cracking Of High Strength Low Alloy Welds In The H2S Containing Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Implications of Temperature And Buffering Systems For Laboratory Testing of Alloy Steel And 13Cr Materials In Oil And Gas Production Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Crevice Corrosion Induced Ssc Of 25Cr Tungsten Alloyed Super Duplex Stainless Steel Tubing Exposed To H2S/Co2Sour Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Klimit In Nace Tm0177 - Method D (Dcb): Defintion, Measurement And Use
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Further Analysis On M13Cr-110 Nace Tm0177 Method A Test Acceptability Prediction
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Environmentally Assisted Cracking Testing Of High Strength 15Cr Steel In Sour Well Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Understanding Of The Mechanism Of Intergranular Stress Corrosion Cracking For Supermartensitic Stainless Steel From Electrochemical Point Of View
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
New Prehardened Steel Grade For Drill-Through Equipments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Environmental Cracking Performance of Super Martensitic Stainless Steels 13Cr In High Chloride Reservoir Fluids Containing H2S/CO2
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Hydrogen Diffusion In a Model Molybdenum Containing Steel: A Comparison Between Hydrogen Ingress Promoted By H2S Or Cathodic Charging
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Sulfide Stress Cracking Susceptibility of Local Hard Areas In Carbon Steel Weld Heat Affected Zones
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Performance of Tantalum-Surface Alloy On Stainless Steel And Multiple Corrosion Resistant Alloys In Laboratory Evaluation of Deep Well Acidizing Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect Of Residual Stresses On The Hic Resistance Of Erw Pipes For Line Pipe Applications
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Fatigue Performance of High Strength Drill Pipe In Sour Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Development of High-strength Ni Alloy OCTG Material For Sour Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Investigation Of Effect Of Plastic Straining On C-Mn Steel Pipelines Prior To Sour Service
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosivity Studies Of Well Completion Fluids Comprising Zncl2/Cacl2 On N-80 Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Difficulties In The Use Of Nace Mr0175/ISO 15156
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Resistance Of Uns N09935 In High Pressure High Temperature Sour Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Hyperduplex Stainless Steel, UNS S33207, For Raw Seawater Injection
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
STG 32 - Advances In Materials For Oil & Gas Production Mitigation of Sulfide Stress Cracking In Down Hole P110 Components Via Low Plasticity Burnishing
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
High Strength And Corrosion Resistant Superalloys For Oil & Gas
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Sour Service Limits For a Molybdenum-Containing, Lean Duplex Stainless Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Material Selection Assessment For Topside Process Equipment For Production Fluids With High CO2 Content
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Preliminary Determination Of Hot Sour Brine Environmental Effect On Fatigue Crack Growth Rate In Grade 29 Titanium Pipe Base And Weld Metal
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Sulfur Corrosion Due To Oxygen Ingress
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects Of Depositing Characteristic And Temperature On Elemental Sulfur Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Suggestions For the Repair of Crack to a Regen #2 Preheater (Failure Prevention of the Regen Preheater)
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Performance of Stressed CRAs In Contact With Elemental Sulfur In Highly Sour Brine
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Modeling Of Elemental Sulfur Deposition In Sour-Gas Petroleum Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Elemental Sulfur Corrosion And Inhibition In the Presence of Sulfur Solvent
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Direct Assessment Pipeline Integrity Management
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Correlation Of External Corrosion Indirect Assessment With Inline Inspection For The Crude Oil Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Interpretation Of Indirect Inspections Data In The Ecda Process
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Integration of External Corrosion Direct Assessment With Integrity Management Software Application
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Monitoring Of Corrosion Parameters Within the Annular Space of Cased Natural Gas Transmission Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Toward A Fully Integrated Pipeline Integrity Management Software
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Optimization Of The Coating Anomaly Detection And Prioritization Methodology Using Voltage Gradient Surveys
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion And Cracking of Carbon Steel In Fuel Grade Ethanol - Supporting Electrolyte And Susceptible Potential Regime
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of Inert Gases (Pure Nitrogen, Nitrogen And Carbon Dioxide Mixtures) On the Corrosiveness of Anhydrous Ethanol (E100)
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Material Compatibility Testing (MCT) For Metals And Coatings In 10% Ethanol Blended Gasoline (E10)
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Importance Of Ethanol Purity In Controlling Stress Corrosion Cracking Of Carbon Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion And Pitting Behavior of Carbon Steel In Simulated Fuel-Grade Ethanol Under Variations In Ethanol Chemistry
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of Ammonia Hydroxide For Mitigating Stress Corrosion Cracking Of Carbon Steel In Fuel Grade Ethanol
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Compatibility Of Carbon Steel With Isobutanol
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Compatibility Of Metals In Jatropha Oil
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Ethanol Scc Research On Pwht Effects And Threshold Stress Determination
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosivity Of Pongamia Pinnata Biodiesel - Diesel Blends On A Few Industrial Metals
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Behavior of Nickel-tin Coated High Temperature Materials Exposed Under Metal Dusting Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Tjeldbergodden Methanol Plant: Metal Dusting Investigations
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
An Approach to Determine the Initiation of Carburization In a 304H Stainless Steel Piping Under Petrochemical Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Influence Of Surface Pre-Treatment On The Metal Dusting Behavior Of Cast And Wrought 20Cr32Nife
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Overcome The Challenge Of High Temperature Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Metal Dusting: Kinetically Or Thermodynamically Controlled?
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Damaged Long Seam Weld On An Outlet Elbow Outside Hot Box Of An Ethane Cracking Furnace
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Failure Analysis: Cracking At Reactor Exit Collector Of Platforming Unit
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Research For Creep Damage By Steam Oxidation Scale of 9Cr Boiler Tubes After Long Time Service
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Chromizing Of 3-Cr Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion And Fouling Of Chromium And Nickel Alloys In Petrochemical Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Behaviour of High Chromium White Irons In High Temperature Caustic
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Life Assessment of Reformer Tubes From Strain Measurement
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A New Lean Nickel Alloy For Use In High Temperature Industrial And Automotive Applications
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Performance of Alumina-Forming Austenitic Steels, Fe-base And Ni-base Alloys Exposed to Metal Dusting Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Prominent Ni-Cr-Si-Cu Alloy Resisting In Metal Dusting
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Monitoring Of Recovery Boiler Tubes By Hydrogen Flux Measurement
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect Of Selective Dissolution On Stress Corrosion Cracking Susceptibility Of Austenitic And Duplex Stainless Steels In Alkaline Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Superheater Tube Corrosion In Wood Gasifier Ash Deposits
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Technical Challenges In Firing Biomass In Pulverized Fuelled Boilers - Industry Experiences
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Synthesis of Published And Unpublished Corrosion Data From Long Term Tests of Fasteners Embedded In Wood: Calculation of Corrosion Rates And the Effect of Corrosion On Lateral Joint Strength
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Threaded Fasteners: Part 1 - Failure Modes And Design Criteria of Connections
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Breakthroughs In Corrosion Control And Materials Engineering In The Pulp And Paper Industry - Lessons From History
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Resistance of Stainless Alloys to Dilute Sulfuric Acid
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Recent Experience With Stainless Steels In FGD Air Pollution Control Service
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Novel Model For The Crevice Corrosion Of Zirconium In Water-Deficient Organics
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Prediction And Measurement of Corrosion Rates of Stainless Steel In Concentrated Sulfuric Acid
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Rolled Lined Corrosion Resistant Steel Pipes In Geothermal Environment: Investigation And Results Of Field Tests
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Behavior of Duplex Stainless Steels In Arabian Seawater
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of Suitability Of Some High-Alloyed Materials For Geothermal Applications
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect Of Sigma Phase On The Corrosion And Stress Corrosion Of 2205 And 2507 Duplex Stainless Steels
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Chloride Limits For Pitting And Cracking of 300 Stainless Steels Series In an Acid Gas Removal Plant
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Properties Of Different Highly Alloyed Clad Materials For Offshore Applications Manufactured By A New Thermo-Mechanical Rolling Process
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Influencing The Functional Properties Of Stainless Steels By Different Surface Treatments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
New Corrosion Resistant Materials Enable Next Generation Energy Processes
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Pipeline Condition Assessment - Locating, Diagnosing, And Mitigating Corrosion Damage
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Regulatory Analysis And Perspective Regarding Leaks From Buried And Underground Piping At Nuclear Power Plants
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Control Considerations For Buried Pipe In Nuclear Generating Facilities
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Methodology For Surveying Buried Plant Piping For Coating Condition And CP Effectiveness
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cathodic Protection Design Considerations For Buried Nuclear Piping
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Predicting Conditions In Coating Disbonded Regions On Buried Pipes In Nuclear Plants
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Copper Grounding And Cathodic Protection In Nuclear Facilities
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of Coatings For Buried Piping In Nuclear Power Plants
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Steam Oxidation Resistance of Shot Peened Austenitic Stainless Steel Superheater Tubes
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of Oxy-firing On Fireside Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Pilot Scale Studies of the Fireside Corrosion Effects of Biomass Co-Firing And / Or Oxy-fuel Coal Firing
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A New Coating Concept For Oxidizing High Chlorine Environments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Recent Experience With Materials Utilized to Resist Coal Ash Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
High Temperature Corrosion Of Burner Tube Alloys Exposed To Flue Gas And Reducing Atmosphere Used For Annealing - A Laboratory Study
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Cyclic Oxidation Behavior Of Ods Fecral Alloys At High Temperature In H2O And CO2 Rich Atmospheres
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Oxidation Behavior Of Super-Bainitic 3Cr Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
How To Screen High Temperature Steels For Optimal Use In Biofuelheated Burners For Residential Boilers: Role Of Alkali
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
High-Temperature Oxidation Resistance Of Solid-Solution And Gammaprime Strenghthened Alloys In The Presence Of Water Vapor
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects Of Ceria Coatings On Materials Performance Of 430 Steel In Coal Synthetic Gas
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Performance of Diffusion Aluminide Coatings Applied On Alloy CF8C-Plus At 800°C
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Regulatory Analysis And Perspective Regarding Degradation of Materials In Light Water Reactors
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A New Nickel-Based Weld Filler Metal For Use In Nuclear Power Plant Construction
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Acceptance Testing of Weld Metals For Nuclear Service
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Of Low Carbon Steel In High Concentration Nitrate Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Inhibition Effect Of Phosphate Ions On Crevice Corrosion Of Alloy 22
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Testing of 304L Stainless Steel In Nitric Acid Environments With Fluorides And Chlorides
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Efficiency Of Inhibitors Of Chloride-Induced Crevice Corrosion Of A Ni-Cr-Mo Alloy
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Electrochemical Properties Of Spark Plasma Sintered Tungsten
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effect of Buffering On Electrochemical Corrosion Behavior of Alloy 800 In Sulfate Solutions Containing Hydrogen Peroxide
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Relationship Between Cathodic Current In Rapid Straining Electrode Test And PWSCC Crack Growth Rate of Nickel Based Alloys Under Simulated Primary Water Condition
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Similarity Between Inter Granular Cracking of Alloy 600 In Simulated Primary Water And High Purity Hydrogen Gas At High Temperature
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Effects Of Deaerated Water On The Toughness Of Nickel-Based Alloys
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Passivity of Nuclear Steam Generator Tube Alloy In Lead-Contaminated Crevice Chemistries With Different PH
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Material Selection And Corrosion Studies For a High Energy Physics Experiment: the Neutron Time-of-flight Facility At CERN
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
An Electrochemical Study Of Liquid Air Interface Corrosion In Dilute Hanford Nuclear Waste
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Microstructural Characterization Of Surface Modified Alloy 82 Welds Regarding Susceptibility To Environmentally Assisted Cracking
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Electrochemical Behavior Of Silicon Modified Stainless Steels In High Temperature Water
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Hydrotesting of LNG Tanks Using Untreated Brackish Water
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Anatomy Of Tubercles On Steel
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
The Influence Of Microorganisms On The Corrosion And Protection Of Metals An Overview
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Novel Approach To Using Thps For Controlling Reservoir Souring
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Lifetime Predictions For Carbon Steel In Natural Fresh Water
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Further Evaluation Of An Online Probe For Simultaneous Monitoring Of Corrosion Rate And Srb Activity: Influence Of Fes Surface Layer
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Phage of Sulfate Reducing Bacteria Isolated From High Saline Environment
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Identification And Quantification of Microorganisms Involved In Downhole MIC In a Dan Oil Producing Well
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Novel Adaptation Of 1950 Vintage Technology To Prevent Pitting Of Copper Heat Exchanger Tubes In A Hydronic System Infected By Corrosive Bacteria
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Development Of Antibacterial Coating Against Sulfate Reducing Bacteria
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Microbially Influenced Corrosion In Oil Sands Water Handling Facilities
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Microbially Influenced Corrosion Assessment In Crude Oil Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Eis Study Of Mic In Three Different Zones Derived From Ship Ballast Tank Model System
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Preliminary Study On Nitrate Injection to Control Souring Problem In Oil Reservoir: Benefits And Side Effects On Steel Material (UNS S31603)
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Microbiologically Influenced Corrosion of High Resistance Alloys In Seawater
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Identification of Microorganisms And Their Effects On Corrosion of Carbon Steels Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Sulfate Reducing Bacteria Influenced Corrosion of Carbon Steel- Nutrient Effects
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Real-time PCR Applied to Quantification of SRB In Bottom Water From Fuel Tanks
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Conventional Application of Biocides May Lead to Bacterial Cell Injury Rather Than Bacterial Kill Within a Biofilm
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Implementation Of A Microbial Control Program For An Offshore Production System In Nigeria
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Bacteria And Microbiologically Induced Corrosion Control In Unconventional Gas Field
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Flow Loop Study Of Chloride Concentration Effect On Erosion, Corrosion And Erosion-Corrosion Of Carbon Steel In CO2 Saturated Systems
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Integrity of Corrosion Inhibitor Films In Multiphase Flow
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Application Of Coupled Electrochemistry And Oxide Layer Growth Models To Water Chemistry Improvement Against Flow Accelerated Corrosion In The Pwr Secondary System
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Predicting the Performance of API-5L-X65 In CO2 Erosion-Corrosion Environments Using Design of Experiments
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Electrochemical Characterization Of Erosion-Corrosion Of X70 Pipeline Steel Under Jet Impingement Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion of Carbon Steel In High CO2 Environment: Flow Effect
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Predicting Sand Erosion In Slug Flows Using A Two-Dimensional Mechanistic Model
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Field Experience: Identification Of The Potential Mechanism Of Flow Assisted Corrosion Due To A Large Viscosity Contrast In Biphasic Flow Of Heavy Crude Oil.
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Flow-Induced Corrosion And Erosion-Corrosion Assessment Of Carbon Steel Pipework In Oil And Gas Production
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Damage Mechanisms In Double-Screw Pumps For Heavy Crude Oil
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Erosion-Corrosion Failures In Wellhead Chokes
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Choosing Better API RP 14E C Factors for Practical Oilfield Implementation
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Electrochemical And Microstructural Response Of Metal Matrix Composites At Different Erosion-Corrosion Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Study On High Alloyed White Cast Irons In Acidic And Chloride Containing Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Effects Of Inspection Sizing Uncertainty On Integrity Management Decisions Due To Corrosion
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Analysis Of Pit Stability In 316L Stainless Steel Exposed To H2S Saturated Dilute Chloride Solutions Above The Critical Pitting Temperature
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Predicting Localized CO2 Corrosion In Carbon Steel Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Pitting Initiation Of Austenitic And Duplex Stainless Steel In Laying Of Flowline In Deepwater
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Pitting Corrosion Mechanisms Of Lean Duplex, Duplex And Super Duplex Stainless Steels In Chloride Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
A Mechanistic Model For Predicting Localized Pitting Corrosion In a Brine Water-CO2 System
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
CO2, H2S And Bacteria Pitting Corrosion Model
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Corrosion Control For A Waste Water Disposal Line
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Experience With An Under Deposit Corrosion Test Method With Galvanic Current Measurements
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Prediction of Uniform CO2 Corrosion of Mild Steel Under Inert Solid Deposits
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Inhibition Of Co2 Corrosion Of 1030 Carbon Steel Beneath Sand-Deposits
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Under-Deposit Corrosion Failure Of A Compressor After Stage Cooler At An NGL Plant - A Case Study
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Development Of A Test Protocol For The Evaluation Of Underdeposit Corrosion Inhibitors In Large Diameter Crude Oil Pipelines
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Internal Pitting Corrosion of X80 Pipeline Steel Under Deposited Sand Bed In CO2-Saturated Solutions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
New Method For Assessing Corrosion Under Iron Sulfide Deposits And CO2/H2S Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Under Deposit Corrosion From Iron Sulfide
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Influence Of Test Conditions And Test Methods In The Evaluation Of Corrosion Inhibitors Used In Pipelines-A Review
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Control of Preferential Weld Corrosion of X65 Pipeline Steel In Flowing Brines Containing Carbon Dioxide
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Efficacy Of Downhole Corrosion Inhibitor Treatment In Sweet Crude Producer Wells
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Evaluation Of Inhibitor For Galvanic Corrosion Of Nickel Alloy And Cs1018 Couple Under Flowing Conditions
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Study of Corrosion And Inhibition of Carbon Steel In CO2 Containing Natural Gas At High Temperature
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.
Performance of High-Temperature, Biodegradable Corrosion Inhibitors
Paper presented at the CORROSION 2011, Houston, Texas, March 2011.