... and Marine Engineers artificial intelligence cantilever beam strength simple beam test model test thickness cantilever beam test freshwater ice upstream oil & gas ice resistance mpa flexural strength ice sheet coefficient strength month 2022 beam test icebreaker resistance power...

... analyze the residual stress caused by the cold forming equipment. Through theoretical derivation and finite element simulation methods, the residual stress distribution for thick plates in the cold forming process was analyzed and compared in this article. Meanwhile, the variation law of residual stress...

...Mattias Liefvendahl; Mattias Johansson A complete approach for wall-modeled large-eddy simulation (WMLES) is demonstrated for the simulation of the flow around a bulk carrier in the model scale. Essential components of the method are an a-priori estimate of the thickness of the turbulent boundary...

... Oil & Gas henningson 2001 Thickness drag reduction Pipeline Corrosion Subsurface Corrosion H2S management frequency transition compliant surface september 2019 compliant coating reynolds number coating 1 coating water-tunnel test equation ts wave carpenter dolphin skin bow...

... 2018 1 3 2018 2018. The Society of Naval Architects and Marine Engineers Thickness history curve peak value water impact Upstream Oil & Gas aspect ratio plate edge elastic plate Water Entry Problem ale method deflection impact pressure air cushion rigidity deformation...

... Thickness constraint Efficiency Artificial Intelligence december 2016 regime variation geometry prediction cavitation BEM cavity ship research algorithm sc hydrofoil optimization problem objective function hydrofoil coefficient Kinna equation Journal of Ship Research, Vol. 60, No. 4...

... strain distribution over the thickness and a definite limit strain on the pressure surface. This allows the stress distribution to be transferred directly from the material curve. The ultimate load is determined by integrating the stress distribution over the section thickness and along the chord length...

... monitoring Upstream Oil & Gas september 2016 Reservoir Surveillance Thickness rudder appendage juncture vortex drag production control production logging stern appendage ship research naca 0018 profile drag log 10 drag prediction reynolds number drag coefficient equation Denote wing...

... structures. 1 6 2012 1 6 2012 2012. The Society of Naval Architects and Marine Engineers steel 3 standoff distance dsdp model interaction equation Kirkwood ship research dynamic viscoplastic response underwater shock Thickness prediction plastic deformation dt 2 deformation...

.... A new scaling method termed the momentum boundary layer thickness (MBLT) method has been developed. This method relates the cross-flow drag on the FRM with that on the full-scale vehicle. Boundary layer velocity profiles on an axisymmetric body at model and full-scale Reynolds numbers have been computed...

... condition, characterized by great values of the unit vertical shear. 1 12 2010 1 12 2010 2010. The Society of Naval Architects and Marine Engineers Upstream Oil & Gas Thickness december 2010 ship research geometry vertical displacement stress distribution cross section...

...) are chosen to show the requisite minimum thickness for marine structures to meet the regulation of IMO heat insulation A-class. Compared with the results of Eurocode's formula calculation and experimental measurement, the effectiveness of the heat insulation performance of marine structures, predicted from...

...Donatella Mascia; Maria L. Tuveri Effects of rocket launch on a naval ship structures located near a rocket gun are studied. Using a finite element thermal analysis, the temperatures along the thickness are determined and then applied to the structure to investigate the thermal stresses...

.... 1 3 2008 1 3 2008 2008. The Society of Naval Architects and Marine Engineers Thickness ship research Reservoir Characterization evaluation fwh equation velocity potential march 2008 application propeller incompressibility assumption contribution noise prediction...

... are considered. 1 12 2007 1 12 2007 2007. The Society of Naval Architects and Marine Engineers vorticity time-dependent virtual inertia ambient fluid singular integral equation rigid body translation ideal fluid tv 2 velocity potential Infinity force component Thickness ship...

... and demonstrates its potential in welding-induced distortion analysis, including buckling analysis. 1 6 2007 1 6 2007 2007. The Society of Naval Architects and Marine Engineers angular distortion thermal-elastic-plastic analysis three-dimensional epa Welding case 2 jung Thickness arc...

...Hai-Hong Sun; C. Guedes Soares This paper proposes a time-variant probabilistic corrosion model derived from a database with 157 thickness measurement records of 140 tankers. Incorporating the corrosion model in a time-dependent reliability method and referring to a required limit of safety level...

...J. A. Sparenberg; E. M. de Jager This paper considers the suction force at the leading edge of a profile with zero thickness in an incompressible and inviscid fluid flow. The theory is linear, and the approach to the suction force is from the innerside of the profile. It is shown that the suction...

... at the Technical University of Denmark. The experimental series included 24 × and T aluminum and steel specimens scaled according to geometrical similarity and with a plate thickness varying between 2 and 20 mm. Theories and experiments demonstrate that the effect of fracture may be very significant for the loads...

.... To allow for the treatment of supercavitating propellers, the method is extended to model the separated flow behind trailing edges with nonzero thickness. The convergence of the method is studied. Results from numerical validation, as well as comparisons of predictions with experimental measurements...