Defence Research and Development Canada (DRDC) Atlantic has conducted many dedicated seakeeping and structural load trials on the Canadian Navy research ship CFAV Quest and on several Canadian Navy warships. Typically, wave buoys have been deployed to measure seaway wave characteristics; however, there has been an ongoing interest in evaluating shipboard wave measurement systems. These systems have some advantages over wave buoys for short-term trials and are needed for longer-term sea trials and to provide wave input data for tactical and real-time ship operator guidance systems. This paper presents some of our experiences with wave radar. In the last few years there have been significant advances in wave radar technology (systems that extract wave data from backscatter information contained in the video output of X-band navigational radar displays). Commercial "off-the-shelf" systems are now available. While there is evidence that these systems can provide reliable wave data from shore-based or stationary platform installations, it is DRDC's experience on a ship moving in waves, that wave radars can give good direction and frequency measurements but less reliable wave heights. DRDC has developed a method to improve shipboard wave height measurement through fusion of wave radar data with measured ship motion response data. This paper discusses the development of the wave data fusion process, validated through previous sea trial data, and presents the results of a recent demonstration of the approach during a sea trial conducted on CFAV Quest in November/December 2008.

Keywords:
ship, buoy, spectra, sea trial, heave displacement, swdf method, Artificial Intelligence, wave buoy, wave height measurement, normalized wave height
Subjects:
Information Management and Systems
This content is only available via PDF.
2011. The Society of Naval Architects and Marine Engineers
You can access this article if you purchase or spend a download.