... drilling operation instability wellbore integrity shale fortune bay inclination borehole management overcome strength anisotropy fortune bay formation drilling parameter strength anisotropy and enhance hole fortune bay shale hole section higher mw high-angle well well p4h-op2 EXTENDED...

... failure drilling equipment fatigue distribution well depth drilling parameter fatigue index maximum cumulative fatigue index predrill interval rotational speed methodology prevent drillstring fatigueand failure shallow dogleg TECHNICAL PAPERS | Drilling Automation and Innovation Methodology...

... parameters to mitigate spiraling effects. 1 12 2024 1 12 2024 1 12 2024 1 12 2024 Copyright 2024, International Petroleum Technology Conference directional drilling systems and equipment reservoir carbonate reservoir well logging drilling parameter fracture drilling...

... managed pressure drilling hydraulic model pore pressure upstream oil & gas bhp drilling parameter fracture pressure technical paper drilling automation surface pressure annular pressure drilling stop circulation hydraulics-modeling platform automate managed-pressure drilling control system...

... of penetration (ROP) on the basis of optimal drilling parameters was the key to tackling these issues. A formal process for optimizing performance was developed, with a focus on optimizing polycrystalline diamond compact (PDC) bit design and drilling hydraulics and developing a drillers’ road map. As a result...

...-interpretation software and executed its work flows to achieve the required objectives. drilling operation intervention complete paper real time system efficiency deviation upstream oil & gas information objective asset and portfolio management technical solution drilling parameter design...

... tools as part of the bottomhole assembly (BHA) downhole close to the bit provides actual weight-on-bit (WOB) and torque-on-bit (TOB) applied to the drilling bit to destroy the rock and, thus, results in more-representative MSE measurements to optimize drilling parameters and ROP in ERD wells. 1 5...

... lateral bha drilling parameter reliability complete paper interference fit power section mud motor configuration sensitivity analysis 53JPT DECEMBER 2020 Today, drill bits and mud motor issues can account for more than half of the reasons for pulling out of hole before total depth (TD...

... International Conference and Exhibition, The Hague, 5–7 March. The paper has not been peer reviewed. Sophisticated drilling-analysis software can help drillers set and modify weight on bit (WOB), rev/min, and other drilling parameters, but achieving acceptance of these software-based recommendations...

...-flow rate to penetrate rock and achieve higher ROP and longer bit runs. Optimized drilling parameters are calculated and updated using a soft closed-loop solution, which monitors the ROP and energy input to the bit in real time by means of a mud logger and topdrive system controller on the rig site...

... partially by SPE. Contact SPE for permission to use material from this document. 1 2 2020 1 2 2020 1 2 2020 1 2 2020 drilling operation drilling parameter offshore hess olesen rig hand driller demand performance limit digital control system isbell schlumberger...

... learning, a hybrid analysis is conducted to separate bit-failure patterns from normal formation transitions and drilling-parameter adjustments. A metric-based algorithm is constructed for real-time monitoring of bit performance and for predicting bit wear. A lightweight web-based framework is used...

... recommendations for improved efficiency. Fig. 1 shows a detailed flowchart of the method. Processing of Real-Time Drilling Inputs The method starts by reading real-time drilling parameters, such as surface torque, rotary speed, WOB, rate of penetration (ROP), differential pressure, and control set points...

... at an early stage of the planning process and was fully integrated into the well design and operations. Mud weight, drilling parameters, and bottomhole-assembly design were all tailored to suit MPD operations. Integrated HP/HT and MPD procedures were developed on the basis of traditional HP/HT techniques...

... vibration), bit aggressiveness and depth-of-cut (DOC) calculations, and drilling-parameter set-point recommendations on the basis of the surface trends. Data Input and Output. The system operates on 1-second data provided from the electronic data-recording equipment. Input data consist of data channels...

...; torsional resonance; bit chatter; modal coupling; and lateral shocks. Data are collected from downhole and surface sensors, as well as cuttings analyses, that measure modes and magnitudes of vibration, tension, compression, and bending within the BHA; drilling parameters; fluid properties; and lithology...

... drilling parameter drop-ball sub drilling operation innovative concept pseudopressure vibration WCC core bit inner assembly assembly core-point detection 60 JPT AUGUST 2016 Coring in unconventional reservoirs with typical unconsolidated formations has introduced additional challenges...

... with the laser range finder. In cases where the return flow is routed through a hose (as opposed to the riser), considerations should be made to account for any pos- sible lag caused by using a hose. Drilling parameters such as drillpipe rotational speed, rate of penetration, and weight on bit can affect BHP...

... correlation information drilling operation quality control big data analysis tool uk continental shelf temperature sensor disparate data type borehole single well drilling parameter aurelien guichard well log caliper interpretation bad hole section MANAGEMENT JPT OCTOBER 201560 Research...

...) and drilling parameters for successful BHE. Understanding the application is critical in delivering a successful BHE operation. Introduction BHE technology has enabled exploiting complex and unconventional reservoirs. Heavier and larger casing strings are set at greater depths, allowing operators to obtain...