Skip Nav Destination
1-20 of 57
J Pet Technol 72 (12): 46–47.
Paper Number: SPE-1220-0046-JPT
Published: 01 December 2020
... upstream oil & gas power water injection ppm objective function analysis operation complete paper drilling fluids and materials gas flotation wosep dehydrator reject water water cut reservoir value methodology disposal water injection dshc 46 JPT DECEMBER 2020 The objective...
J Pet Technol 72 (05): 45–48.
Paper Number: SPE-0520-0045-JPT
Published: 01 May 2020
... of 2.24 units for Oil 6 as com-pared to the maximum value measured of 6.02 units for Oil 2. The addition of 500 ppm of AI-1 formulation to each of the crude oil samples increased overall asphaltene dispersancy and resulted in higher ADAPT readings. paraffin remediation artificial intelligence...
J Pet Technol 71 (06): 72–73.
Paper Number: SPE-0619-0072-JPT
Published: 01 June 2019
... byproduct of seawater-based fracturing. As a result, various water treatments have been implemented to decrease scale formation. One such method involves nanofiltration. Experimental results have shown that nanofiltration caused sulfate reduction in seawater sources down to 300 ppm. This lowers the scaling...
J Pet Technol 70 (01): 52–53.
Paper Number: SPE-0118-0052-JPT
Published: 01 January 2018
... the preliminary history matching confirms the validity of the approach. 2017. Society of Petroleum Engineers waterflooding conceptual model Artificial Intelligence PPM salinity water management Upstream Oil & Gas information producer commingled well work flow evaluation reservoir enhanced...
J Pet Technol 68 (09): 110–112.
Paper Number: SPE-0916-0110-JPT
Published: 01 September 2016
... inhibitor scale inhibition Corrosion Management concentration scale inhibitor waterflooding asphaltene inhibition quantification double inhibitor quantification PPM paraffin remediation Hydrate Remediation hydrate inhibition Upstream Oil & Gas remediation of hydrates inhibitor time...
J Pet Technol 67 (02): 40–42.
Paper Number: SPE-0215-0040-JPT
Published: 01 February 2015
... in association with hydrocarbons has high salinity. Shale oil and gas flowback water salinity typically range from 16,000 parts per million (ppm) to more than 300,000 in some instances. For comparison, sea water runs around 35,000 ppm. The chemicals introduced into the fracturing fluid will also be present...
J Pet Technol 66 (09): 149–152.
Paper Number: SPE-0914-0149-JPT
Published: 01 September 2014
...) content at approximately 30 ppm, with anticipated levels of H 2 S at approximately 55 ppm during production, although approximately 5 ppm was measured from core barrels. The petrographic reservoir-characterization and -connectivity study shows evidence of pyrite, sphalerite, bitumen, and iron minerals...
J Pet Technol 66 (06): 116–118.
Paper Number: SPE-0614-0116-JPT
Published: 01 June 2014
... and viscous oil under reservoir conditions. During the past 5 years, 3,200 tons of hydrolyzed polyacrylamide polymer was injected at concentrations of 1,500 ppm. The polymer flooding resulted in an increase in oil production to 100% and a decrease in water production to 50% in original central wells...
J Pet Technol 64 (11): 92–99.
Paper Number: SPE-1112-0092-JPT
Published: 01 November 2012
... the nanoparticles are recovered. This translates into required stability at temperatures exceeding 100°C and salinities exceeding 120,000 ppm in total dis-solved solids in the presence of divalent (as well as monovalent) ions such as Ca ++ , Mg ++ , and SO 4 −− . Reservoir Characterization Upstream Oil...
J Pet Technol 64 (04): 30–33.
Paper Number: SPE-0412-0030-JPT
Published: 01 April 2012
..., with recorded measure- ments of 1,400 ppm to 1,700 ppm in the run tank and 1,500 ppm to 2,400 ppm in the incoming tank. At these levels, the H2S was a severe threat to safe production, and frequent treatment was required to bring it under control. The levels were assumed to have resulted from microbial growth...
J Pet Technol 63 (03): 84–85.
Paper Number: SPE-0311-0084-JPT
Published: 01 March 2011
... separation and reinjection still remain a challenge even after 20 years of industry research and development. 1 3 2011 1 3 2011 1 3 2011 1 3 2011 2011. Society of Petroleum Engineers Upstream Oil & Gas PPM Saudi Arabia government iw system in-line-water-separation...
J Pet Technol 61 (03): 65–68.
Paper Number: SPE-0309-0065-JPT
Published: 01 March 2009
... inhibitor squeeze application Priobskoye squeeze life permeability application squeeze treatment squeeze design PPM tendency electrical submersible pump Electrical submersible pumps (ESPs) can increase production rates, but run time can be compromised by the formation of scale inside the pump...
J Pet Technol 60 (06): 72–74.
Paper Number: SPE-0608-0072-JPT
Published: 01 June 2008
... VESS phase separation precipitate apparent viscosity viscoelastic surfactant pH value asphaltene remediation well integrity remediation of hydrates concentration viscosity surfactant interaction acidizing scale inhibition ves-based acid PPM new formation-damage mechanism fe 3...
J Pet Technol 59 (06): 50–51.
Paper Number: SPE-0607-0050-JPT
Published: 01 June 2007
... Princess Field injection well completion design waterflooding Efficiency corrosion sulfate injector souring membrane seawater enhanced recovery waterflood project reservoir PPM reservoir souring permeate threat Ursa injection deepwater environment 50 JPT JUNE 2007 The waterflood...
J Pet Technol 58 (12): 50–52.
Paper Number: SPE-1206-0050-JPT
Published: 01 December 2006
... oilfield chemistry well integrity flowline corrosion Production Chemistry Upstream Oil & Gas materials and corrosion riser corrosion Pipeline Corrosion oilfield brine Brine corrosion rate new class Corrosion Management polyaspartate PPM reduction corrosion inhibitor inhibitor...
J Pet Technol 58 (03): 71–73.
Paper Number: SPE-0306-0071-JPT
Published: 01 March 2006
... layers. The combined effects of depressurization and gas breakthrough have caused the average producing GOR to increase from 700 to 1900 m 3 /m 3 . The formation waters differ significantly, with salinity and hardness increasing with depth, from 35,000 ppm total dissolved solids (TDS) [calcium (Ca...
J Pet Technol 56 (05): 10–12.
Paper Number: SPE-0504-0010-JPT
Published: 01 May 2004
... this document. chevrontexaco corp atmospheric carbon upstream oil & gas baker carbon literature air emission board of directors operation coal co 2 bp america inc north america ppm consumption climate change health safety fossil fuel assoc 10 MAY 2004 The Quadruple Bottom Line...
J Pet Technol 50 (02): 12.
Paper Number: SPE-0298-0012-JPT
Published: 01 February 1998
... this document. Upstream Oil & Gas PPM ratify air emission Kyoto Protocol nightly news global warming temperature increase life span consequence climate change intention co 2 energy usage protocol 12 FEBRUARY 1998 My intention as SPE President has been to use this column as a vehicle...
J Pet Technol 50 (01): 82–84.
Paper Number: SPE-0198-0082-JPT
Published: 01 January 1998
... feedwater produced water discharge PPM precipitate downcomer lime Upstream Oil & Gas oilfield water co 2 poor-quality oilfield water Field testing alkalinity precipitation source water Sulfide Removal reduction hardness 1 1 1998 1 1 1998 1 1 1998 1 1 1998 82...
J Pet Technol 47 (09): 782–787.
Paper Number: SPE-28991-PA
Published: 01 September 1995
...: flocculation titrations with n-heptane resulted in an optimum concentration of 1300 ppm. PVT calculations, however, indicated that the prevailing conditions downhole can be quite favourable with respect to the amount of effective inhibitor compared to the atmospheric laboratory titrations which appear...
Product(s) added to cartClose Modal