..., typically by evalu- ating the increments of displacement associated with periods of high RER in the model. An example image from such an evaluation is shown in Figure 5. Options to change the mine plan to reduce the likelihood or severity of dynamic stability are considered, typically using the model...

... pdrt seismic loading criterion displacement permanent displacement ratio theory permanent displacement seismic intensity strength reduction factor stability analysis wedge slope example dynamic stability Wenchuan Earthquake Reservoir Characterization seismic permanent displacement...

... the faults slip?" In the frames of this problem several key questions and issues were formulated. Among these questions was the following: "What physical properties control diverse types of fault sliding?" and "What governs transitions from stick-slip behavior to steady sliding?" displacement stick...

... that process of strain localization was realized only in the form of slow deformation waves with different directions of displacement inside: the longitudinal and transverse waves. The velocity of such waves decreased up to 10 −4 m/s with increasing of applied load. At the prefracture stage localized strain...

... construction project, a FEM model is established by midas GTS. The stress field, displacement field and velocity distribution and transfer laws is analyzed under blasting vibration. Conclusions about the dynamic response of high cutting slope under blasting vibration are as follows: As the explosion...

... stability analysis renewable energy road cut slope stability analysis Sarkar reservoir geomechanics displacement Rock mechanics total displacement Singh rock mass case study numerical solution geology Himachal Pradesh Himalaya India 2016. Taylor & Francis Group. Permission...

... of initial value or initial-boundary value of hyperbolic type or hyperbolic-diffusibility type. Artificial Intelligence displacement boundary condition machine learning Upstream Oil & Gas frequency band neural network anchor bar Reservoir Characterization anchor cone stress wave...

... different rocks with uniaxial compressive strength values ranging between 7–215 MPa were tested to measure pre-peak and post-peak stress-strain relations. A stiff servo-controlled machine was used to undertake lateral displacement controlled tests. Postpeak stress-strain relations were obtained accurately...