..., the hydrodynamics within the gap and how that changes with relative placement also needs to be understood. subsea system vineesh and sriram free-surface elevation time-history viscous force configuration experiment magnitude sw configuration liquified natural gas (lng) simulation motion response...

... waves (Scharnke et al., 2014). The momentum method was also found to underestimate the magnitude of the wave-in-deck forces on a fixed horizontal deck subjected to unidirectional regular waves (Abdussamie et al., 2014a, Abdussamie et al., 2014c). horizontal force offshore abdussamie global...

... of 3D tidal flow in different layers before and after the construction of 2012 project. The results indicate that the horizontal flow is dominant. The velocity increases in front of Caofeidian foreland and decreases in Laolonggou deep channel and harbour basins of Caofeidian. velocity magnitude...

... magnitude 1A at the five points. From Fig. 6 it can be seen that the pontoons have significant effects on the linear free surface elevation in the vicinity of structure and the effects are likely to depend on the frequency of the incident wave. For short incident waves, pontoons are found to have a weak...

... on 1. The other two coordinates and , Fig. 3. SBFEM solution procedure with magnitudes ranging from -1 to 1, locally represent the scaled boundary element mesh on face 1. No discretisation is needed for 2. The boundary condition on 2 can be satisfied by applying it on to the nodes...

... ABSTRACT: Most of the existing mathematical models for analyzing the dynamic response of TLP are based on explicit or implicit assumptions that motions (translations and rotations) are small magnitude. However, when TLP works in severe adverse conditions, the a priori assumption on small...

... welding residual stress and its distribution in the plate thickness direction. transverse residual stress crack initiation magnitude crack propagation interpolation function welding residual stress estimation stress redistribution residual stress plate thickness direction tensile...

... the magnitude of the loading velocity. Based upon the experimental results obtained here, the characteristics of the impact loading is Incorporated Into the above derived procedure which IS for the quasi-static loading condition. 1. INTRODUCTION With the strengthening of code requirements for the structural...

... magnitude deformation stiffness matrix strength analysis axial force initial deflection plasticity full plasticity Proceedings of the First Pacific/Asia Offshore Mechonics SymposIum Seoul. Korea. 24-28 June. 1990 Copynght © 1990 by The International SocIety of Offshore and Polar Engineers...