... software. It was found that the introduction of power-to-gas could reduce total yearly emissions by about 50% at a slight increase in net present cost while reducing the capacity of the diesel generator. social responsibility electrolyzer sustainability sustainable development torque equation...

... hydraulic accumulator sustainability wave energy converter talos wec generator torque accumulator pto geometry hydraulic pto valve pto operation Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference Rhodes, Greece, June 16 21, 2024 Copyright © 2024...

... is influenced by both the incident wave periods and the damping levels. Additionally, torque generation strongly depends on the damping levels for the Coulomb-type power take-off mechanism considered in this study. The capture factor was high for both short and long wave periods at high and low PTO damping...

.... Focusing on the two benchmark cases – UAE reference wind turbine and DTU 10MW wind turbine – investigations include the prediction of rotor thrust and torque, blade bending moment, pressure distributions at different sections along the blade span, as well as velocity and vorticity fields in the rotor wake...

... prototype scenario reservoir simulation sustainable development assessment section converter constraint formulation information angular displacement representation wavestar prototype synthesis procedure denote torque absorption Proceedings of the Thirty-fourth (2024) International Ocean...

... as the statistical average of the thrust and torque are reported and discussed. The wind turbine performance has been validated against the numerical results from the computational fluid dynamics simulation (Xing, et al. 2024) and experimental data (Bouman, et al. 2023). Here the focus is on the parametric study...

...) presented an experimental study for the elastic and failure behavior of composite laminated pipes under torsion, and compared it to the results of thin pipe analytical and finite element models. The relationships of torque versus shear strain and torque versus torsional angle and the effects of fiber lay...

... artificial intelligence tether reliability geologist submarine glider coefficient modeling & simulation experiment accuracy geology hydrofoil buoyancy dynamic modeling worsen torque excitation sensor diagram case2 case3 case4 case5 case6 amplitude Proceedings...

... cutter cutter teeth control strategy construction cutter tooth geologist traverse speed cutterhead intelligent control strategy trolley geology cutter head rotation speed cutter speed cutting reservoir characterization torque specific energy efficiency constant speed...

... by the pressure body between the compressed flanges, which in turn depends on two main scattering parameters - geometric flange imperfections and the preload level. With standardised torque controlled tightening methods, the achievable preload level is strongly dependent on the friction conditions of the paired...

... are further carried out. The test results show that the smaller the cutting thickness of the hob tooth is, the smaller the cutting force is, and the smaller the soil particles formed after cutting the hard clay are, the more conducive to suction and transportation. Besides, the influence of cutting torque...

... model by calling external functions through Python script. We have simulated the turbine's behavior with constant wind loads under different sea states and yaw rates. The primary objective was to investigate the torque exerted on the universal joint located at the seabed, a crucial design parameter...

... asia government drillstring design brushless dc motor rotor scc china government bldc motor artificial intelligence vector modeling & simulation control strategy power switch magnetic field different control strategy torque control drive module position signal type control...

... that the total torque generated by the redistributed lift is equal to the expected torque of the basic controller, so as to achieve the purpose of fault tolerance and enable the AUV of X rudder to continue to perform tasks or float. Finally, by analyzing the numerical simulation control of the heading Angle of X...

... inclination angle lateral load wedge-shaped body different initial speed simulation upstream oil & gas water surface different inclination angle water entry positive peak value wedge initial speed equation vertical load oblique free entry peak value time history torque...

... quickly reduce the cutting torque and power. Although increasing the cutting depth, hob rotation rate and reducing the ship forward speed can effectively improve the dredging efficiency of the draghead, it is worth noting that these factors are limited by the equipment and operation of the suction dredger...

... sections or with considerable pipeline rotations. rc section fe model under-rotated rc section lateral pull force offshore pipeline lateral installation residual curvature upstream oil & gas torsional friction rotation mitigation measure torque midstream oil & gas pipeline...

... angle incidence angle different oblique flow angle coefficient reservoir simulation flow angle podded propulsion torque propulsion podded propeller cavitation performance Proceedings of the Thirty-second (2022) International Ocean and Polar Engineering Conference Shanghai, China, June 5 10...

... injection torque shaft system shaft speed united states government electrical industrial apparatus diesel engine propeller simulation propeller pitch ship propulsion system combinator curve voltage Proceedings of the Thirty-second (2022) International Ocean and Polar Engineering Conference...

... sustainability risk management risk and uncertainty assessment social responsibility machine learning sustainable development modeling & simulation efficiency std standard deviation efficiency standard deviation sample size efficiency map torque efficiency mean map efficiency...