...; Sarpkaya, 1986, 2001, 2005), which lacks of theoretical and experimental research. china government equation platform circular column asia government isw drag coefficient reynolds number upstream oil & gas pontoon part oblique isw solitary wave kc number theoretical model wave...

... ABSTRACT The failure of ship structure is usually caused by the combined action of LCF failure and accumulative plastic damage. In this paper, a CTOD theoretical model of LCF cracks considering accumulative plastic failure under cyclic loading is established. The LCF crack growth experiment...

... blbl model health & medicine particle size ultrasonic wave real time system suspension frequency transducer propagation ore particle flexible pipe pipe theoretical model information ecah model particle information Proceedings of the Thirty-second (2022) International Ocean...

... in a certain construction project site, a long-distance pipeline transport dynamic theoretical model is established and validated by a large number of field test data. Firstly, the real-time concentration data, which are measured by the radioactive concentration meter located on the ship, are extrapolated...

... impact point and bulkhead behaves in the form of an exponential function. A single pipe theoretical model is adopted with the impact point on the bulkhead. The PIP is simplified as a Single Pipe Weight (SPW) model when the impact point is far enough from the bulkhead, such that a theoretical model...

... amplitude shaft theoretical model propulsion system vibration shaft test platform eddy current sensor hull deformation measure point bearing transverse direction An Experimental Research on the Vibration of a Ship Propulsion Model Excited by Dynamic Excitations Zhe Tian1,2, Yinlong Shao3, Lin...

...-long wave flume. The force/moment on a semi-submersible model were measured. The fluctuations of the interface (i.e. ISW) were recorded by two arrays of conductivity probes. Experiments and theoretical models are compared in terms of frequency-amplitude relationship. As expected, the classical KdV...

... in advance. A theoretical model is proposed to deal with the configuration and internal loads along the pipeline during the laying process. The total pipeline configuration from the lay-barge to the seabed is divided into two parts: one part suspended in water, the other part laid on the seabed. The effect...

.... This indicates that the loads caused by the tower shadow of the truss tower will be smaller. KEY WORDS: Wind turbine; truss tower; downwind; tower shadow; vortex shedding; wind tunnel experiment; theoretical model. INTRODUCTION From the start of the modern wind turbine era up until today the growth in wind...

... believed to decrease the bearing capacity of the sand layer is to use the jetting system of a jack-up. In this paper, a theoretical model was proposed to analyze the effect of such a jetting system on decreasing the bearing capacity of sand layer, and the corresponding numerical and experimental results...

... theoretical expression theoretical model wellbore integrity strength Proceedings of the Eleventh (2001) International Offshore and Polar Engineering Conference Stavanger, Norway, June 17-22, 2001 Copyright © 2001 by The International Society of Offshore and Polar Engineers ISBN 1-880653-51-6 (Set); ISBN...

... design is approximately proper from the viewpoints of motions in waves and wave energy absorption. A theoretical model is also presented to estimate the motions, especially the heaving motion which is affected by strong non-linearity due to the viscous force acting on a disk fin. The validity...

... subsea system upstream oil & gas flow stress strength collision thickness cylinder side shell bow collision beam model offshore installation formula impact load energy absorption side collision theoretical model calculation installation deck plate deformation supply...

... consolidated part ice-structure interaction ice load expression random value modeling & simulation theoretical model calculation sakhalin offshore offshore structure extreme ice load detennination bekker first-year ridge distribution fimction simulation model estimation hoceedings...

... good agreement spectral response upstream oil & gas power spectral density mooring system theoretical model natural period cylinder buoy dynamic behaviour spectrum frequency coherence buoy irregular wave heave platform subsea system transfer function surge The dynamic...

... at the return pipe of a closed loop where conditions were sufficiently stable for the testing period. ooncentration pipe production logging identification conduit image processing video camera system determination production control solid line theoretical model local velocity solid particle...

... ABSTRACT In a series of publications over the last fourteen years, a number of theoretical models (backed by large scale experimental data) based on a treatment of the layers of wires in a spiral strand as a series of orthotropic sheets, have been reported by the present author and his...

... circular cylinder gap distance cylinder chwang landweber rectangular cylinder mechanical engineering interaction ro 1 hydrodynamic interaction variation regression particular case university theoretical model interaction force coefficient investigation calibration...

... ABSTRACT: A theoretical model is constructed for the large deflection deformation of a rigid-plastic cantilever with a tip mass loaded by a transverse follower-force pulse applied to its tip. The purpose of constructing and analysing such a model is to provide an analytical basis for studying...

... are presented in tabular form. Comparison is made of the experimental results with the predictions of two theoretical models developed for computing the ice forces on smooth cones. The forces measured on the multifaceted cone show reasonable agreement with the Ralston (1980) theoretical model. INTRODUCTION...