... liquified natural gas toughness asia government ni-tmcp steel steel plate ctod value stress analysis base metal gas monetization hydraulic fracturing lng tank test result applicability ni steel fcaw joint specimen welding fracture toughness brittle fracture Proceedings of the Thirty...

... examined, which are 1.6, 3.2, 6.3, and 12.3 μm (Ra). As expected, we found that the surface roughness significantly affects the coefficient of friction. This study summarizes the test results for wet and dry tests. We hope that this study can provide insights into the design of subsea clamps...

... and the conventional DNV model (DNV-ST-F101, 2021) is compared with the results of full-scale collapse testing. The predictions of the improved model are significantly closer to the actual test results of cold-formed pipe in as- fabricated condition compared with the conventional model. For a pipe subjected to (light...

... increasing yield strength has a positive effect, while increased thickness is considered to be detrimental for low thermal cut qualities (e.g. DNV, 2021). In addition, the fatigue test results were used for validation of the currently applied characteristic fatigue strength values of thermal cut plate edges...

..., it is expected to occur when the ship has a large GM and is moving through the waves in beam seas or stern quartering seas. united states government model test roll motion roll reduction performance natural roll period parametric roll ship test result containership model test result marine...

... upstream oil & gas stiffness strength test result similarity polypropylene submerged weight model experiment axial stiffness pipeline model experiment stiffness similarity potential material similarity criterion tensile test offshore pipeline silicone operation tensile...

... materials and corrosion heat treatment size effect riser corrosion artificial intelligence flowline corrosion ihf bolt system test result din en coating glienke surface condition hv bolt bolt assembly hydraulic fracturing pipeline corrosion assembly detail category 50 investigation...

... the towing stability of a transportation barge and investigated the effect of skeg, length of towing line and towing speed on towing stability. marine transportation test result scenario 1 towing characteristic real scale model test model test result heeled condition accident ship tug boat...

...-speed craft model is carried out. By comparing the impact load test results and numerical results of the high-speed craft under regular waves, the effectiveness and accuracy of the numerical simulation method used in this paper are verified. Through the analysis of the results, it can be obtained...

... orifice rao failure condition air chamber water surface test result air reservoir 1 simulation result wave energy converter matrix Proceedings of the Thirty-second (2022) International Ocean and Polar Engineering Conference Shanghai, China, June 5 10, 2022 Copyright © 2022 by the International...

... outer steel tube cfst pile steel tube lateral load concrete pile critical load lateral displacement displacement rock-socketed pile strength constructional steel research majishan port field test test result core concrete engineering thin-walled structure bearing capacity...

... the numerical calculation software meets the computational accuracy requirement. The green water ingress in open cargo holds is one of the most important factors for designing a type of hatchless container ship, which has the fear of the flood of shipping water in hold. The model test result of green water...

... debris oscillation zone regular wave test beach plastic wave frequency frequency wave test wave tank test result ocean experiment steady oscillation zone sample particle wave height plastic waste Plastic Debris in Waves: An Experimental Study Yi Huang 1, Zhi-Ming Yuan 1,2, Sai-Shuai...

... that at the middle position of the ship. The experimental results are compared with the numerical simulation results. On this basis, the adaptive characteristics of the ship under different conditions are given by numerical simulation method. Combined with the test results, in case of the influence of long-period...

... formula, the results are often deviated greatly, and even there are some cases where the formula limit conditions are not applicable. artificial island phase difference bridge deck junction test result wave action thickness measuring point coefficient bridge lateral force wave height...

... compression test effective stress ratio box shear apparatus test result cyclic triaxial compression test stress amplitude ratio amplitude displacement cyclic namber national institute Development of National Institute of Technology, Kochi College type cyclic box shear apparatus capable...

... precipitate haz strength 9 test result tensile strength metals & mining high strength 9 weld metal composition requirement mechanical property Weldability Evaluation of a New High Strength 9% Ni Steel for Cryogenic Applications Wenkao Hou1 George J. Fraley1, Ronald Gollihue2 Fred B...

... by selecting principal parameters and detailed hull form parameters. The regression line is validated by comparing the computational fluid dynamics results and the model test results in the towing tanks. INTRODUCTION In order to estimate the ship's powering performance, model tests have been conducted...

... pile end resistance diameter test result pile end resistance pile tip pile end disk plate pile construction method construction method displacement end disk plate root part Fundamental Study on End Resistance of Bored Precast Pile Toshihide Yamashita Maeda Co., Ltd., Chiyoda, Tokyo...

... access hole brittle fracture test result crack tip specimen skeleton curve ductile crack beam cope Prediction of brittle fracture at the Toes of Weld Access Hole of the welded I-section Beam End Junwei Wang, Koji Azuma Department of Architecture, Sojo University Kumamoto, Japan Tsutomu...