... The traditional method to check ultimate strength is deterministic method, which does not consider the influence of uncertain factors. In this paper, a 10,000 TEU container ship is chosen as studying object, whose ultimate strength is calculated by Smith's method. In addition, deterministic...

... strength of some river-sea container ships using Smith's Method, and also analyzed the effects of the floor spaces, the scantlings of the deck longitudinal, the thicknesses of the deck plating and the sheer strakes on the ultimate loading capacity; Parunov, Andric, Corak and Kitarovic (2015) investigated...

... the non-linear finite element analysis as well as the simplified analysis based on the Smith's method, and these results are compared with the experimental results. INTRODUCTION The hull structures are typical box girder structures composed of stiffened plates, and the various loads, e.g., bending...

... Abstract In this study we discuss the shapes and statistics of the rogue (freak) waves emerging due to wave-current interactions. With this purpose, we use a simple governing equation which is a nonlinear Schrödinger equation (NLSE) extended by R. Smith (1976). This extended NLSE accounts...

...) of damaged hull structures is calculated utilizing the idealized stress-strain relationships of damaged structural members and the simplified calculation program, which is developed by authors and based on the Smith's method. Furthermore, to examine the accuracy of this simplified calculation program...

... taflanidis requirement smith modeling resio hurricane risk assessment engineering island westerink risk assessment kennedy artificial intelligence us government Hurricane risk rapid assessment and cyber-implementation A.A. Taflanidis, G. Jia, T.L. Kijewski-Correa and A.B. Kennedy Department...

... of the vegetation and the sand as reference for the erosion processes, are presented. A couple model was run to determine the morphology and coastal variation in Karasu Beach. river reservoir smith international conference us government deep spot sakarya river coastal engineering sediment transport...

.... Five currently used bulk algorithms: BDY (Dupuis et al., 1997), CCM3 (Large and Pond, 1982), COARE 3.0 (Fairall et al., 2003), HOAPS (Smith, 1988) and UA (Zeng et al., 1998), which are independent of wind waves, are selected to investigate their disparities in OML through Mellor-Yamada model...

...". wave period frequency jonswap spectrum sea state wec power conversion time series fraction ocean energy variation spectra bandwidth smith spectrum machine learning venugopal renewable energy generic method social responsibility sustainability sustainable development wave height...

.... sequence consideration strength structural element marine transportation hull girder calculation neutral axis passenger ship cross section collapse analysis passenger ship deck collapse fe analysis evaluation effectiveness ultimate strength longitudinal strength smith passenger...

... in the papers of Savage et al. (2000) and (2001), and Savage (2002). iceberg waterline length cross-sectional area wave height input parameter donaldson forecast air drag coefficient deterioration coefficient iceberg drift reference case surface water smith sensitivity dimension equation...

... of depth. Naturally, an estimate of keel area variation with depth is needed for appropriate evaluation of drag forces. cross-sectional area national research council canada iceberg draft iceberg geometry information miller waterline length deterioration keel iceberg drift smith...

... relations are fairly accurate. Our developed Smith's method program uses this numerical database for the non-linear behavior of each structural unit, and estimates accurate non-linear behaviors of ship longitudinal strength. This numerical method can be applied to reliability analysis. INTRODUCTION...

... 210Pb relative to its precursor 226Ra existed in abyssal sediments and it gave a quantitative measure of the rate of biological mixing of the surface sediments. sediment north pacific spatial variability cochran bioturbation coefficient inventory basin particle smith vertical profile...

... with group interference effects derived from tests in regular wave conditions have previously been reported in detail for the two cylinder case with cylinders oriented transverse to the wave direction (Haritos and Smith, (1994, 1995); Smith and Haritos (1995)) and in-line to the wave direction (Smith...

... ship structures, the damaged area is reduced to several panels (plate-stiffener assemblies) with initial imperfections. Two essential damage models are considered and the influence of residual stress caused by damage is taken into account qualitatively. longitudinal strength smith stiffened...

... dependence of the transition wave is predicted and behaves like ƒ t /ƒ s ∼ Re 0.87 . Which agrees well with experimental results of Wei & Smith, but differs from Braza's prediction and the experimental results of Bloor and Kourta et al. Nonlinear interaction of two kinds of vortices leading...

... tests. From original computer code worked out by Smith (1962), based on mathematical models of striking bars developed in the 19th century, this technique has evolved to field monitoring developed by Goble et al. (1975). In Brasil, applications of field measurement technique started In offshore jobs...

... by using a treatment suggested by the result of Smith (1975). In this study, the result of Shyu and Phillips (1990) is extended to investigate the interaction of a random wave train with an adverse current. Explicit expression of the frequency spectrum of the random wave train is obtained in terms...

... ABSTRACT: The simplified model developed by Taby (1981) is extended to eccentrically loaded cases. Combining with a regression equation developed by Smith (1982), the model can be easily implemented in a numerical program developed for a beam-column with no damaged section (Cai and Wang, 1989...