... penetration sustainability sustainable development collision solver se solver ship collision fowt turbine maximum penetration characteristic simulation deformation simplified structural assessment boundary drilling equipment subsea system floater relation semisubmersible floater mcol...

... relation specimen thickness deformation belgium testing ABSTRACT This paper presents a material testing method using small specimens, requiring only a small quantity of material. The material is extracted by drilling an M39 bolt hole. Tensile tests on a specially designed bow-tie-shaped...

... otechnique geologist mineral spherical cavity pressuremeter test expansion process penetration test pressure-expansion curve expansion take place relation membrane cavity canada government determination constitutive property experimental data interpretation Proceedings of the Thirty-third...

... of model tests, a nonlinear lateral pipe-soil interaction model is proposed to describe the lateral resistance force-displacement relation. 3D finite element numerical models in which the relation of the nonlinear pipe-soil interaction is employed are established to study the lateral buckling behavior...

.... Toyosada, Gotoh, and Niwa (2004) first introduced a numerical theory for FCP analysis, FLARP (Fatigue Life Assessment by Re-tensile Plastic zone generating load) based on the EDS concept. EDS is a fictitious crack face traction that reproduces the relation between crack length, a and stress intensity...

.... The results accord closely with well-known determined and gives the relation between the stream function and experimental data rather than irrotational solution. vorticity. Substituting the relation to the other PDE, we have a Helmholtz equation. By solving the Helmholtz equation, the stream function is KEY...

... hull lines with vertical sides extending over the entire hull entrance or even bulbous bows. Such vessels may have an ice class up to Arc7. The hydrodynamic model does not provide sufficiently simple analytical relations for class rules to estimate impact ice loads on vertical sides in way of forebody...

... ABSTRACT This paper presents numerical simulation of key physical properties of typical offshore dynamic power cable. Axial, torsional and bending stiffness are included, and validated by performing full-scale tests. Comparison of the results indicates the inherent relation between the complex...

... because of the low cost and high versatility. numerical simulation diameter floater frequency model test relation model test result water depth upstream oil & gas scr steel lazy wave riser simulation current velocity vibration frequency vortex viv amplitude amplitude riser...

... propose a continuum wave-ice model where the floating sea ice is described as a homogeneous poroelastic material and the underlying ocean is viewed as a slightly compressible fluid. The exact dispersion relation for linear traveling wave solutions of this coupled system is established and compared...

... plane. reconstruction algorithm reflection image pair point cloud imaging plane accuracy relation sea surface distortion pixel procedure stereo image wave field benetazzo algorithm alignment right image image sensor 4D Mapping of Sea State by Stereo Photographic Imaging...

... damage. Proposed relation shows a good agreement with experimental fatigue lives of fillets welded joints. INTRODUCTION Most of the constructional details of the steel structures are generally subjected to effect of stress concentration. This was one of the main reasons for fatigue damage (Fisher...

... the liquefaction in comparison to what is given by standard non-liquefied p - y curves. stiffness shear stress-shear strain relation monopile dynamic load earthquake engineering liquefaction dynamic analysis earthquake engineering loading triaxial test boundary condition foundation relation...

... of numerous scholars. fairlead axial stiffness calculation mooring system upstream oil & gas equation equilibrium equation subsea system node response estimation cable relation catenary equation rod theory consideration effective tension strain relation newton iteration comparison...

.... The strength of every type of sea ice decreases with increasing ice temperature. FYI and SYI are governed by nearly identical BHS-temperature relations for overlapping temperatures in the range −10°C to 0°C, but it is also important to note that SYI can be expected to deteriorate about one month later than FYI...

... ABSTRACT For evaluation of the consequences of ship-ship collisions, and ship collisions against offshore installations and bridges, it is important to know the force-displacement relation and the energy absorption caused by crushing of complex bulbous bow structures. This paper presents...

... of the prediction of ship waves within the Neumann-Michell theory, a practical theory useful for routine applications to ship design. A simple analytical relation that explicitly determines the wavenumber of insignificant short waves in terms of the Froude number and three main parameters that characterize the ship...

... ABSTRACT In this study, we have considered the relation between topographic features and the distribution of polymetallic nodules based on their sizes and chemical composition in the Japanese License Area, Clarion-Clipperton Fracture Zone, Central Pacific. It has been observed that small...

... of large amplitude internal solitary waves interaction with a uniform slope have been investigated in a numerical flume. ISWs main features depend on the geometrical parameters that define the initial experimental setting. The relations between ISWs geometric and kinematic features and the initial setting...

... strength development bo 20 relation mass ratio initial water content erosion rate strength upstream oil & gas inactive zone shear stress moderate zone hydraulic resistance property strength increment coefficient bo 30 Strength behavior and hydraulic resistance properties of dredged...