... continuous power, which in turn leads to higher energy converter efficiencies and lower costs (Yang et al., 2020). Because of the remarkable effect that arrays of PA-WECs in a wave farm have on the transformation of incident waves (Carballo and Iglesias, 2013), incident waves will diffract and refract among...

... upstream oil & gas wave force time step simulation engineering sub-sea system incident wave grid first-order component europe government free surface amplitude wavelength nonlinear method hydrodynamic behavior square method boundary condition pitch motion interaction mesh...

... panel method is introduced, where nonlinear free surface boundary condition considering both the influence of steady ship wave and incident wave. In the outer domain, free surface Green's function method is used, where the free surface boundary condition is satisfied automatically. On the control...

... incident wave sustainable development control system algorithm platform design sub-sea system excitation force disturbance nonlinear model experiment model predictive controller control method float motion prediction horizon dt model displacement Proceedings of the Thirty-third (2023...

... simulation gate speed experiment wet dam-break method reservoir simulation incident wave elevation dam-break method upstream oil & gas release speed gate release speed mp method equation different gate speed wave pattern asia government different gate release speed particle...

... forces and other aspects of pontoon-type floating breakwaters. asia government transmission coefficient comb-type breakwater model test china government wave height wave surface curve incident wave height breakwater waste management reflection coefficient hydrodynamic characteristic...

... freight & logistics services ship control surface application marine transportation resistance experiment data hydrodynamic analysis order force wigley-iii pitch motion field method multi-domain method calculation ship hull incident wave boundary condition ocean engineering...

... (2018). The potential of floating, non-rigid thin-film PV modules for large-scale offshore PV installations has been tested by Solar@Sea I & II (2020). floating production storage and offloading fpso vff model equation elevation floating production system subsea system incident wave...

... responsibility wind energy offshore wind turbine maximum tension operation incident wave maintenance amplitude simulation engineering Proceedings of the Thirty-second (2022) International Ocean and Polar Engineering Conference Shanghai, China, June 5 10, 2022 Copyright © 2022 by the International...

... with wave depth varying along the path through experimental data results. Liu(2017) obtained high-resolution wave data in time and space through wave flume wave creation experiment using image method, and revealed the mechanism effect of incident waves with different periods on the enhancement and weakening...

.... They are superimposed on suitable waves, resulting in a complex interference pattern of waves. In this case, the height of the waves behind the channel is significantly reduced in relation to the incident wave. Theoretically, the values of the critical angle for different wave periods were calculated in the range from...

..., respectively. The boundary conditions in the inner domain consider nonlinear items including incident wave potential and elevation, by which wave-body interactions are analyzed influenced by incident waves. Large amplitude ship motions, such as parametric roll of C11 container ship, are then simulated...

... ABSTRACT Boundary element method (BEM) with fully nonlinear boundary conditions is developed to simulate the interaction between an incident wave and a freely floating cylinder. The elastic mesh technique (EMT) is adopted to optimize the mesh on free surface in time domain. Auxiliary functions...

..., and the nonlinear characteristics of surface elevation around cylinders is discussed. Further investigation of the detailed components of surface elevation revealed that not only the firstorder but also the second-order surface elevation component is significant for some particular incident wave frequencies...

... are calculated for a fixed bow-flare ship section in regular and irregular waves. The incident waves can be generated by using HOSM (higher order spectral method) to give inputs at wavemaker boundary. Different truncation periods for short waves are considered to show the influence of short-wave components...

... considering the geometric and the incident wave parameters are analyzed with great efforts. It shows that the width of the plate barrier and the depth of the shallow water play important roles to eliminate the incident wave. The wave parameters are changed remarkably over the submerged plate barrier besides...

..., the Blunt modified Wigley, is used for all the simulations. The bow wave generated by the Blunt modified Wigley hull at a constant speed in incident waves is considered. The bow wave and the ship hydrodynamics are investigated by using Reynolds-averaged Navier-Stokes (RANS) method with Volume of Fluid (VOF...

... of the plates on the wave absorptivity is studied. time series grid wave load mitigation effect reservoir simulation incident wave perforation ratio wave force wave interaction renewable energy hi 0 amplitude total dynamic wave force wave reflection offshore structure engineering...

... of different surrounding fluids, enhanced columns and incident wave are discussed. Finally, some conclusions are obtained which may play important roles in practical engineering. INTRODUCTION Double-panel structure is a classic research object in sound insulation field, and Fahy et al. (2007) and Du et al...

... computational model. The motions of moored ship is predicted in Bingham (2000) by the hybrid Boussinesq-panel method. The Boussinesq model of Madsen and Sorensen (1992) is used for propagating an irregular wave system from the wave-maker to a moored ship. The local incident wave field is decomposed to be input...