... to the design value, which threatens the safety of the floatover operations. The study provides valuable suggestions on the topside floatover installation for the jacket platform in the South China Sea. INTRODUCTION With the development of China's oil and gas resources in the South China Sea, high...

... code ice load molikpaq upstream oil & gas iso estimation design value offshore structure csa wide structure normal distribution vsn 41 global ice load level ice field ice condition cumulative distribution subsea system platform coefficient Global Ice Loads on the Sakhalin...

... reference for the similar cases of deep excavation in the weak soils with high groundwater level. excavation deep excavation slab final stage site b-problem section design value anchor inclinometer construction axial force diaphragm wall perspective view strut site a-problem section...

... displacement horizontal displacement design value directional drilling foundation system soil foundation settlement Stability Analysis of an Artificial Island Structure Designed for Developing the Gas Field Bellendir E. N., Finagenov O.M., Glagovsky V. B. JSC B. E. Vedeneev VNIIG St.-Petersburg...

... marine structures. The electromagnetic covermeter testing method is used to measure the cover depths of existing marine concrete structures. The standard derivation of the testing values is very large, the mean value is very close to the design value, and the testing values of cover depths follow...

... machine learning selection engineering time series gev distribution application dp 90 maxima deca prediction order statistic method design value order statistic model independency sample size A new method for applying the r-largest maxima model for design sea-state prediction Takvor H...

... ABSTRACT In this work, a new de-clustering method is presented and applied for the estimation of design values of H S by means of the "Peaks-Over- Threshold" (POT) method. An essential requirement of the POT method refers to the independency among exceedances of a certain threshold level u...

... of calculation of return values or design values is of interest. Methodology from the field of extreme-value statistics is then used. Many open problems exist with regard to stochastic modelling of wind, see Kestens and Teugels (2001) for a review and for a recent study on estimation of extreme wind speeds...

... chainpolyester- ground chain and chain-spring buoys-jacketed spiral strandground chain and for 10,000 ft water depth it consists of a chainpolyester- ground chain combined line. Considering the design values the question may arise on the value of the coupled analysis and the effects of the Cd-values...

... for the choice of steel material, the DASt-Ri 009, is based, for instance, on empirical results from large scale tests. sedlacek steel material design value ssct cct-specimen langenberg air temperature brittle fracture limit state partial safety element resistance steel bridge temperature...

... for the comparison with analytical results. Emphasis has been put on the verification of analytical procedures and results, applied for the design of the Snorre platform. Extreme and fatigue response of tethers was extracted from the measurements in order to be compared with the original design values. The quality...

... is discussed. The design value of the loads is based on the required target reliability. The barrier is divided into its main substructures, such as the gates, trusses, ball joints, etc. Each substructure is idealized by elements as defined in the design code. Failure of each of the individual elements...

... values. Due to availability of the multi-year data for both cold and mild winters and due to the procedure mentioned above the design values for physicomechanical properties of sea ice in the region under discussion were obtained. INTRODUCTION The presence of a dynamic ice cover complicates...