... condition. The flow chart of the study is presented in Fig. 1 marine transportation china government floating production system structure ring requirement ballast water asia government fpso scenario 2 dry dock floating production storage and offloading floating production storage...

... design of the minimum ballast water ship (MIBS) meeting the IMO stability performance criteria was carried out and the systems engineering process basis conceptual design was conducted on the concept of ships replacing the required minimum ballast water with NGH which the fuel for a ship. As a result...

... ABSTRACT By controlling the ballast water to adjust the buoyancy of the platform to achieve automatic float. Designing a fuzzy PID controller for the characteristics of strong nonlinearity, time-varying and susceptibility to the process of blowing off ballast water. In order to simplify...

... in the whole pre-established operating process are investigated through time domain coupled analysis, taking into account environmental loads, thrust allocation of the DP system, righting moment by virtue of ballast water, and the variation of wind load coefficients and mass matrix. INTRODUCTION A very...

... of the discharged ballast water, for the formation of oil/water emulsion and for heat transfers between the hot oil and the cold water in the wet storage system. When wet storage system is applied to a floating platform, the sloshing of oil-water interface in the storage tank may exacerbate above-mentioned...

...- submerged mode. Then open the channel outlets and gradually speed up the hull with certain acceleration, the water inside the channel will flow out due to inertia effect. Finally, most of the ballast water in the channel can be drawn out by this inertia effect at certain speed. Furthermore, the stern trim...

.... pcc resistance reduction coefficient loading compact car cb 0 half weight aluminum container block coefficient marine transportation aluminum container displacement ship container labor cost reduction hull resistance ballast water A Feasibility Study on Containerization of a Pure...

...ABSTRACT International Maritime Organization (IMO) adopted the International Convention for the Control and Management of Ships Ballast Water and Sediments in 2004. This convention requires the strict standard for discharge of ballast water performance described as D-2 regulation, but many...

... tanker with non ballast-water is proposed. The round and streamlined hull of the ship drastically reduces the viscous resistance, and multi-podded-propulsors moving up and down keep enough depth of the propellers from water surface.Resistance tests of model ships of the proposed tanker with different...

... ABSTRACT In recent years, environmental problems such as discharge of CO 2 have become very serious for future society. Moreover, the ballast water of vessels clearly plays a critical role in the conservation or destruction of global sea's ecosystems. As a solution of these problems, next...

... for application, for example, to large-sized power plant which uses large amount of seawater (Ikegami et. al (1994), Ikegami et. al (1995), Ikegami et. al (2006)). heat treatment management symposium effectiveness sea water sterilization ballast water international conference heat-treatment...

... ice sheet temperature distribution freezing area ballast water freezing sea water production monitoring thickness side hull surface production control reservoir surveillance upstream oil & gas heat transfer variable specific heat coefficient specific heat production logging...

... ABSTRACT The objective of this paper is the study of the possible use of meteomarine forecasts for correct management of ships ballast water, in order to improve the safety of navigation, having in consideration the economical costs (wrong load/unload of water) and the possible environmental...