... compression liquified natural gas (lng) configuration lng carrier max exc compression deformation subsea system ballast compatibility mooring system table 2 calculation ocimf lng terminal sketch fsru high ship Proceedings of the Thirty-fourth (2024) International Ocean and Polar...

... were arranged on the two sides of No.4 cargo hold; One 400T salvage buoyancy tank was arranged on the port sides of engine room, one 150T salvage air bag and two 50T air bags on the starboard side. Bow peak tank ballast 95%; NO.1 cargo hold ballast 95%; For the position of engine room...

... platform clearance gravity floating production systems effect dcop mathematics of computing stability ballast platform stability formula keel tank subsea system deep-draft cylindrical offshore platform displacement calculation buoyancy insufficient stability shanghai jiao tong...

... from the mooring lines. 4. Hydrostatic pressure from internal ballast. For calculating the loads transferred by the tower and the mooring lines, OpenFAST ( OpenFAST 2024), an open-source software developed for the dynamic analysis of floating wind turbines, is employed. Fig. 1 displays the platform's...

.... Therefore, the stability of offshore structures under wave conditions are particularly important. The target object for seawater cooling pipeline is the stability of pipes during wave attacks. Due to the light weight of HDPE pipe, the ballast is usually used to add to the pipe for the purpose of increasing...

... auxiliary servo valve failure threshold function output fault tree fault fusion fuzzy logic simulation result auv fault event probability top event risk coefficient expert system load rejection system control function multiple fault ballast Research on Emergency Load Rejection System...

... the requirements of metacentric height (GM) and stability criterion (Kc) for crane platforms. ship lifting jack-up platform classification offshore unit crane platform upstream oil & gas intercept angle ballast drilling equipment crane jib platform requirement stability metacentric height...

... energy. The draft of the floating body do affects the effectiveness of breakwater. The transmitted coefficient decreases with increasing draft. When the floating box is ballasted with water, there exists in the inside of the floating breakwater a resisting force against the wave force outside...

... gyration time trace inner iteration decrement ratio simulation ballast bilge keel height roll decay time trace subsea system floating production system roll amplitude 01/ 2 ( 3 (2...

.... resistance numerical result boundary condition experiment marine transportation vlcc channel flow simulation coefficient yang equation ship hull resistance scale effect ballast characteristic value ship model experiment numerical simulation freight & logistics services formula...

... adequate buoyancy so that only the ballast is modified from one station-keeping system to another. As the catenary mooring may become challenging in shallow water, further site-specific studies will be necessary. In addition to the description of the design, the wind turbine characteristics incorporated...

... loads, including aspects such as the insufficient self-weight, requiring additional ballast to comply with requisites and technical specifications related to the on-bottom stability of the optical cable, considering the high currents of the Negro river. INTRODUCTION In order to meet the growing...

... ratlp ballast storage subsea system ice load wave load kennedy ssgp hull construction cost fitzpatrick anchor steel cable group buoyancy topsides displacement water depth rig platform upstream oil & gas ABSTRACT The Rigid Artic Tension Leg Platform (RATLP...

... construction steel ballast upstream oil & gas stability platform installation platform stability safety factor pontoon caisson substructure seismic load gravity base substructure operation calculation water depth main structure environmental load withstand base pontoon...

... ballast to provide restoring forces to moor the vessel. The vessels are attached to the yoke with two pendant linkages, which have one double-axis joint on upper end (upper U-joint) and one triple-axis joint on lower end (lower U-Joint). The pendants hang over the vessel bow or stern and are attached...

... that the FPSO's motion responses with two systems will be similar. surge hydrodynamic performance fpso turret moored fpso spectrum full load calculation sway water depth floating production system subsea system hydrodynamic response frequency mooring system ballast heave hybrid model test...

.... hot spot stress loading specimen subsea system side longitudinal floating production system specimen 1 hot spot crack initiation ballast ballast condition test specimen crack growth fpso sn curve transverse frame weld toe fatigue testing full scale fatigue testing Proceedings...

... to overcome. The existing platform may not adequately function or its cost may be too high in such a waterdepth. platform stability mean drift force new semi-dode multi-purpose offshore platform motion analysis subsea system kip frequency spar platform time domain ballast rao offshore...

... Prefecture, with UROV system was developed in JAMSTEC. fiber optic cable sea trial vehicle spooler jamstec onboard unit communication system ballast cable system expendable fiber optic rov specification tv camera urov system support vessel Proceedings of the Ninth (1999) International...

... & gas hibernia gb substructure shaft subsea system platform hibernia gravity base structure caisson ballast newfoundland requirement construction topsides storage cell storage tank iceberg slab barge operation Proceedings of the Eighth (1998) International Offshore and Polar...