1-20 of 221
Keywords: requirement
Close
Sort by
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23774-MS
... reservoir production enhancement well intervention hpht completion monobore completion msc deployment wellbore integrity liner packer requirement liner completion rock type downhole intervention log analysis zonal isolation fracture stimulation permeability assembly conference delivery...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23766-MS
... of formation is serious using classic directional drilling tools that fail to meet this requirement. Thus, uniform wall thickness Positive Drive Motor with 1.5 bend angle and Rotary Steering System of push-the-bit type are selected in surface and second spud drilling to ensure adequate build rate...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23474-MS
..., especially in the cases when the wells are unable to self-produce above the critical lift velocity (Turner’s velocity). These wells require solutions like lifting liquids on a periodic basis or whenever a well has to be activated after shut-in operations. Although, few proven technologies such as nitrogen...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23977-MS
... the dispensing requirements. Inject water at a steady pressure for more than 2 hours. After confirming that the flow rate is stable, set the flow rate of the adjustment layer and inject water normally. Open the faucets in order from low to high according to the dispensing amount, and adjust the flow rate of each...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23986-MS
.... When implemented appropriately, they allow quick and automated quality check and corrections on wellbore trajectory position which is critical in Anti-Collision and tight target wells. Even though the correction platform is automated it still requires clarity and confidence in the algorithms. This can...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23195-MS
... and intelligent RSS that can address modern unconventional drilling requirements. By utilizing state-of-the-art sensor capabilities, a bidirectional communication system that can receive and confirm commands near instantaneously, and a flexible aggressiveness controller, this system is able to immediately correct...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23204-EA
... optimizing investment and realizing the financial benefit from higher liquids production. The study also established a clear relationship between gas breakeven prices and upfront capital investment required in both the hybrid and liquid-rich start-up cases with a condensate export option. Multi development...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24160-MS
... type drilling fluid selection and formulation emulsification corrosion inhibitor formulation 1 crystallization drilling fluid property heavy oil play operation requirement weighting agent application Introduction The primary oil reservoirs in Ecuador are located within the M1, T...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23324-MS
... with the highest rank pass to phase 2, the feasibility study. In this phase, selected reservoirs are reviewed in detail to quantify the reservoir capacity, optimize injection scenarios, confirm the required well count, and propose injection points. The study will forecast the evolution of the CO 2 plume over time...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-23535-EA
... efficiencies. geology well testing ghg emission geologist reservoir geomechanics operator innovative emission monitoring hydrocarbon information emission drillstem testing operation international petroleum technology conference reduce environmental impact requirement operational efficiency...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24583-MS
... conference composite repair validation strength inspection onshore pipeline correlation evaluation mechanism iso 24817 requirement Introduction The composite wrap has been applied to the 3D bend of the PTTEP 32" Gas Export Line since 2009. The composite wrap has a service life of 20 years...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24662-MS
... of the existing platform and jackets, structural integrity and subsea parts, production assurance, electrical requirements, and safety aspects as an impact of an additional new well. Some scenarios are demonstrated, and the detailed engineering modelling is simulated within high-rate scenarios, including facility...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24647-MS
... denotes the polytropic head. M head denotes the head function and M efficiency denotes the efficiency function; η P being the polytropic efficiency. The power required for compression is calculated through equation (9) : (9) H P = 1000   W P F W P denotes the polytropic...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24607-MS
... increasingly essential to incorporate sustainability principles into these systems to address the challenges posed by resource depletion, environmental degradation and the urgent need for resource utilization ( Zoitl & Strasser, 2016 ). Sustainability is no longer an aspiration but a critical requirement...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24450-EA
... Abstract Electric control packers have the characteristics of simple and fast setting and unlocking processes, and are commonly used for short-term testing operations that require reservoir sealing. At present, electrically controlled packers are generally driven by electric hydraulic pressure...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24344-MS
... technology conference transition deep learning machine learning functionality hardware international conference foundation artificial intelligence real time system interface requirement architecture integration disruption utilization Introduction The modern industrial landscape...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, February 12, 2024
Paper Number: IPTC-24398-MS
... to be equal to or greater than the full treatment duration. It is also commonly required to match the bottom hole static temperature (BHST) for the whole lab test duration with a minor focus on the overall tubulars and reservoir cooldown during later stages of the treatment. The advanced planar 3D simulator...

Product(s) added to cart

Close Modal