..., the inefficiency of the pump-sliding sleeve coupling would not allow the productive potential of the wells to be realized. The new jet pump presented in this article eliminates these problems. hydraulic jet pump artificial lift system international petroleum technology conference oil production...

... of the natural flow. However, the fatigue due to the flow by the JP system caused pin holes to form in the CT, which were detected after one to two years of oil production utilizing the JP system. To address this issue, it was decided to reinstall the JP system with MT which is thicker and has higher integrity...

... configuration hydrate curve manifold cse-4 downstream temperature innovative tool wax remediation hydrate remediation hydrate inhibition asphaltene inhibition oil production shutdown hydrate formation proxy model different meoh concentration scenario international petroleum technology conference...

..., the field has been under active water injection for more than two decades. However, being a complex carbonate reservoir with high textural heterogeneity, the water-front movement is not very well understood and monitored. To increase the oil production, the operator started drilling horizontal drain-holes...

... Abstract There is abundant heavy oil resource in Bohai Oilfield and steam stimulation has proven an effective method through several field pilots. Till now, all steam stimulation is conducted by two-trips string for steam injection and oil production individually. That is, when the process...

.... Simulation studies and field trials were conducted, which concluded that better recoveries would be obtained through waterflooding [5] . water injection schemes were implemented in field reservoirs. However, they failed to arrest either the pressure or oil production decline. The horizontal wells were...

... function in this phase is the oil production, which must be maximized, having as constraint the maximum gas flow rate treatable by the plant. This tool has proven to be able to solve the problem in less than a minute. In this paper, the substantial advantages of substituting the physical model...

... The development of the Ishpingo-Tiputini-Tambococha (ITT) project was extremely important to increase the Ecuadorian oil production curve at least 10%, and to have a low cost per barrel of oil produced, considering Ecuador's oil industry as the primary income source in the national economy...

... As a Brown Field, located in North Africa. Approximately 95% of Zarzaitine field wells are utilizing Gas Lift as an artificial lift method. The field has a challenging situation to optimize its Oil production; A detailed understanding of the production sys tem thermohydraulic, facility design...

... Intelligence Upstream Oil & Gas Exhibition enhanced recovery drilling operation heater heavy oil reservoir Directional Drilling heating application optimization problem oil production electrical heating genetic algorithm reservoir international petroleum technology conference passive model...

... that the autonomous inflow control valve (AICV) was capable of sealing off sections with high gas production at completion joint while the oil production will continue producing from other zone along the lateral ensuring optimum oil production and recovery by being oil viscosity dependent. High GOR was ultimately...

... frequently as part of the surveillance plan. The analysis of the injection and production data shows positive response with more oil production for each barrel of water injection in all four treated patterns. This work exhibits a systematic approach of polymer gel injection for waterflood conformance...

..., water shut-off of the length below the ICDs had to be performed; leaving much of the oil behind. In cases where the water production is from the heel or in the middle compartment with high oil production from the bottom, the options are very limited. A new generation of adaptive ICDs has lately been...

... placed with several horizontal wells in tapping the oil within transition zone to maximize recovery. This paper will discuss an integrated multi-disciplinary views on understanding the flow characteristics and dry oil production from transition zone. Understanding the capillary pressure, depletion...

... Abstract The Triassic Yanchang formation is rich in tight oil resource at Ordos Basin. The oil sandstone and oil shale of Chang 7 member are widely spread in the basin and have huge potential in oil production. Due to low porosity and low permeability, producing oil from tight oil reservoir...

... qucikly and it is reliable to be promoted in the area of CO 2 geological sequestration. subsurface storage oil production coefficient storage capacity reservoir enhanced recovery oil reservoir solubility breakthrough co 2 Upstream Oil & Gas EOR Operation storage capacity estimation...

... as an example. geological modeling Reservoir Characterization knowledge management conformance improvement field development optimization and planning oil production infill adjustment complex fluvial reservoir Directional Drilling oilfield geological uncertainty water cut old well asset...

... attained the destination of oil production increment and water cut reduction. The average oil production of single well had been increased 40 m 3 /d in two experimental wells from 2012 to 2017 in LD Oilfield. The cumulative oil increment had reached 50,000 m 3 . The general water percentage had decreased...

... for the success of oil production and past failure are also the key for the future selection. It could adapted for dynamic conditions of mature field with unbiased, repeatable and reliable. However, the current lifting selection still based on strong human's opinions. It tends to complete by their most familiar...

... information porosity recovery factor saturation oil production interference test skin factor Mmstb permeability orientation OOIP Material Balance determination reservoir fractured reservoir Aguilera , R. , 2006 . " Effect of Fracture Compressibility on Oil Recovery from Stress...