... by the Blowout Preventer (BOP) stack, a crucial safety measure that acts as a secondary line of defense. This recognition should show how MPD is an integral part of well planning and shouldn't be seen as an upgrade or bolt-on feature. As an integrated part of well planning, well integrity analysis is necessary...

... Abstract An operator in the deepwater environment offshore West Africa tasked the cement service company to develop a solution to help ensure long-term integrity of the annular cement placed behind the 7-in. liner in a gas injector well. This well was designed as a dry gas injector, with up...

... the evolving landscape and challenges addressed by integrated analytics in this dynamic field. This paper concentrates on optimizing casing exit operations, particularly in extended reach drilling through the integration of technical torque drag and hydraulic model analytics, this approach aims to bolster...

... review of Monitoring, Measurement and Verification (MMV) for CO 2 storage in general, as well as a review specific to the storage site, were extensively conducted. Finally, an Integrated Asset Management (IAM) platform for real-time monitoring of well and equipment parameters, was built for the field...

... demonstrated that the integration of intelligent completion technology into gas and oil wells enables precise evaluation and strategic planning through the utilization of predictive analytics. By utilizing these analytics, one can gain a more profound comprehension of the reservoir's behavior. This allows...

... subsurface storage hydraulic fracturing cement formulation cement cement property epoxy-based resin international petroleum technology conference non -portland cement pumping schedule portland cement integrity cement placement stage co2 injection selection reaction non-portland cement...

... Health Monitoring (SHM) system on offshore platform to enable continuous real-time monitoring and automated evaluation of the structural integrity based on the offshore feeding data of a 4-legged fixed substructure which has experienced vessel collision earlier. The collaboration between asset owners...

... that are associated with CO 2 injection and the appropriate actions and mitigation plans. Severe cooling due to phase changes and Joule Thomson effects inside tubing, as well as cycling of cooling and heating conditions, can negatively impact well and reservoir integrity including cap rock. This paper presents...

... practices as references to accommodate and add new wells within existing facilities are vary. The objectives of this paper are to highlight the decision-making process and the innovation to overcome an extra well with an additional higher rate to the platform without jeopardizing the facility's integrity...

... is used to confirm the integrity of open hole packers. The method resulted in sustaining well performance and concomitant decrease in water production. This paper describes detailed job planning, field data interpretation process, decision making and some key insights for enhancing the whole work process...

... Unknown condition of the installed well-tubulars and well integrity problems Changes in the formation strength because of depletion and low reservoir pressure High Formation permeability which can cause loss of circulation issues when paired with low reservoir pressure in which...

...-for-purpose cement design could be overlooked as well as overdesigned based upon the notion of "corrosion risks" for well integrity. The cementing design approach should look holistically at the corrosive risks and isolation requirements as opposed to a single solution approach or wort case design independent...

... affecting the integrity of the fault. At the same time, gas-water two-phase seepage and flow-solid coupling principles are used to analyze the seepage mechanics and geomechanics of the conceptual model by combining with the integrated software of geoengineering. According to the simulation results...

... of spoolable products. Due to their multi-layered structure, RTP pipe products face challenges when operators try to employ traditional non-destructive evaluation (NDE) technologies for inspection and integrity verification. This creates a unique opportunity for RTP pipe manufacturers and pipeline operators...

... and formulation well control cement formulation setting casing cement property knowledge management drilling fluid chemistry contamination plug integrity cement slurry international petroleum technology conference placement saudi arabia wiper plug rathole pipe shoe track integrity Introduction...

... Comparing to HWO Unit Abstract This paper will present one of the challenging deep gas well integrity restoration within Petroleum Development of Oman (PDO). The well showed indications of parted 4 ½" tubing post frac operations. The failure resulted in compromising the well integrity and pressure...

... with a narrow mud window between the pore pressure and fracture gradient have always imposed a significant risk on well integrity during drilling and post-drilling operations. One of the main risks associated with such formation behavior is complete or partial loss of returns while drilling or cementing leading...

... experience greater inrush current that in some cases can exceed rated nameplate values and could potentially damage system electrical insulation and integrity. Moreover, it was observed that, these large motors generate greater heat compared to the same small motors at similar environments and conditions...

... the overall wellbore stability, as illustrated in Figure 1 . The most commonly used cement types in the oil and gas industry are Portland cement of class G/H. Any failure of cement can compromise wellbore integrity, resulting in health, safety, and production concerns ( Adjei & Elkatatny, 2020 ; Salehi...

... produced improved performance over existing low-BTU technology with a new inovative design named "Extremely Low BTU flare tip". The design has been validated with CFD and hundreds of prototype tests to ensure that flame stability and mechanical integrity are achieved. The next step is to implement a field...