... mobility fluid nature, it was necessary to find efficient ways to enhance the overall hydrocarbon recovery factor of the field. Several sensitivities were performed, on the number of wells, number of hydraulic fractures, well design, artificial lift options, water, and gas injection. According...

... Abstract Intermittent oil recovery is a direct and effective way to reduce energy consumption and improve recovery efficiency. However, the existing open and shut-in well procedure relies on manual control, which has problems such as increased labor costs, changeless intermittent parameters...

..., the working gas volume and operating efficiency of S2 UGS underperformed relative to modeled expectations. The technical solutions to improve the working gas volume of S2 USG focused upon: well pattern optimization, well placement, stimulation treatment, infillings, and increasing of operating maximum...

... bonding, and reduces permeability. The application of this new cement system in the Denver-Julesburg Basin demonstrates its ability to mitigate and reduce the occurrence of SCP both pre and post fracturing while delivering a more efficient and sustainable solution. The innovative chemistry of the cement...

... electrode srb bacteria wellbore water injection well wax remediation efficiency contribution research institute carbon steel international petroleum technology conference perforation Introduction In the production of oil and gas, the rapid consumption of oil and gas resources makes...

... Abstract CO 2 foam is an effective method to reduce CO 2 mobility and improve displacement efficiency in CO 2 enhanced oil recovery (EOR) and CO 2 storage applications. Foam strength and stability are key parameters that influence the efficiency of the foam which depend on several factors...

... Abstract Drilling in hard and abrasive formation represents a major challenge due to the low rate of penetration (ROP). Rotary percussive drilling tools take advantage of both the shear action of drill bit cutters and axial percussion energy to increase the drilling efficiency. Such tools have...

... and alignment of the system to the sub allows to start the continuous circulation. The use of AI allows for drastic enhancement in drilling efficiency and safety standards reducing the number of humans needed inputs. The human-machine interaction represents a competitive advantage over traditional systems...

... demonstrated that the polymer improved the sweep efficiency of the flood in both vertical and horizontal directions. Ultimately, the increase in oil recovery factor gain was 2.41%. asia government chemical flooding methods polymer high-salinity reservoir conformance improvement thailand government...

... On the basis of polymer flooding, the ASP technology takes use of surfactants to further improve oil displacement efficiency, and its main displacement mechanism depends on polymer flooding. For reservoirs that have undergone large-scale polymer flooding, ASP is used to further improve oil...

... the field is on polymer flood to improve the sweep efficiency during enhanced oil recovery. As expected, polymer breakthrough was observed in producer wells. However, this has resulted in challenging well interventions due to polymer/scale depositions in the wellbore and Downhole artificial lift equipment...

... the desired temperature based on local environment. The mechanism of Joule-Thomson effect is reducing gas pressure (gas expansion) then gas temperature will be reduced correspondingly. This can be classified as energy loss that can be improved by process optimization for better energy efficiency with GHG...

... and dependent variables are identified, along with the consideration of ambient conditions and equipment operating efficiencies. Machine Learning (ML) algorithms are then applied, using available industry software, to build and improve these relationships using the historical data. The best-fit forecast models...

... on industry 4.0 technologies. Enhanced software-based analysis, design, optimization, and automation has proved to be effective in enhancing the production rate from an existing gas lifted well. A selection criterion and workflow setup were devised for a major operator to enhance the efficiency of a gas lift...

..., and adaptations made to absolve it, in both acquiring and processing the penta source data. The results are compared with pre-existing legacy data, and with it, recommendations for better acquisition efficiency and processing results. reservoir characterization marine acquisition inline fold...

... reserve and also improve the efficiency of the workflow by reducing the execution time by 240 times. The results provide solid support to achieve more reliable and accurate well placement. This new solution generates an improved reservoir risk map with flexibility of using many secondary variables...

... on the ground. During the 5 years’ test, ISIT was optimized from the field breakdown including large flow range flowing test, cable protection project, efficient coding mode, water seepage resistance and so on. With the continuous optimization and quality control improvement, ISIT has overcome many problems...

... and injection volume. Supporting techniques: a high temperature oil-and-acid resistant foam system to form a precedent-blocking slug and automatically adjust the huff-and-puff profile. a dedicated low-cost and high-efficiency corrosion inhibitor system to realize corrosion-resistance. a four-node...

... as fast as possible. The design of the new WBCU surfactant hinges on these criteria. In the lab, the performance of the material is measured using a "cleaning efficiency" test at different drilling fluids densities and WBCU formulations. Series of iterations were performed to determine the best chemistry...

... hydraulic efficiency, in addition to the close monitoring of coring parameters, played a significant role in improving core cutting in fractured carbonate formation layers. This optimization helped the team to successfully complete the 1 st high angle coring operation offshore in the United Arab Emirates...