... concentrations. Leveraging sequential data and memory cell architectures, the research developed an LSTM (Long Short-Term Memory) machine learning model aimed at predicting and comprehending swelling behaviors within specific contexts. This model was trained using input parameters such as zeta potential, salt...

... inhibition freshwater wellbore stability shale drilling fluid chemistry shale inhibitor npa drilling fluid selection and formulation mechanism inhibition shale hydration reactive shale international petroleum technology conference concentration instability reactivity Introduction...

... mercury customer arsenic international petroleum technology conference chemistry crude contaminant ppb hydrocarbon value enhancement benchmarking hydrocarbon slurry removal concentration novel total system solution approach Introduction Crude oil is a complex mixture of hydrocarbons...

... of the tools. The maximum concentration of the bridging materials recipe is 45 lb/bbl. The developed recipe of medium, fine and ultrafine graphite and calcium carbonate (CaCO 3 ) fibrous chemicals that is added to the active drilling system helped to seal off and strengthen member D while drilling through...

... surfactant cylinder concentration produced water hydrocarbon fraction liquid loading Introduction As the reservoirs are depleting, liquid loading has become one of the most common issues in fields that are mature. This happens when gas rates are not sufficient to lift associated reservoir...

.... geologist sedimentary rock mineral fluid dynamics waterflooding flow in porous media produced water discharge halide experiment geology rock type seawater concentration reinjection composition enhanced recovery flooding experiment figure 6 electron microscope permeability danish north...

... formulations. enhanced recovery efficiency polymer surfactant hapam displacement displacement efficiency interaction waterflooding viscosity micromodel ift concentration sp formulation hydrophobically chemical flooding methods emulsion injection formulation international petroleum...

... adsorption concentration lsp flooding adsorption polymer viscosity reaction complexation reaction Introduction and Background The global need for energy will continue to expand in the next few decades owing to the enormous world population growth. Since renewables cannot suffice for the growing...

... geologist waterflooding geology mineral enhanced recovery sedimentary rock injection rock type mdr increment lsw sw injection fluid-fluid interaction cucl 2 oil recovery dmk effectiveness carbonate reservoir complex reservoir mechanism concentration interface additive oil...

... inhibition characteristics. In this work, a combined effect of polymer and Gemini surfactant was studied on the shale inhibition characteristics. Various drilling fluid formulations were prepared by adding 0.25 to 0.4% concentration of associative polymer and 0.25% concentration of Gemini surfactant. All...

... of the additives with the lowest dosage rate, defoamers and antifoams represent a particular challenge when looking into formulations with more environmentally-viable materials. ( Bava & Mahmoudkhani, 2013 ). Required treatment concentrations vary between 0.03 – 3 kg/m3. As Karakashev & Grozdanova...

... and water by inducing phase dispersion and altering the physical characteristics of the oil in the reservoir. While previous research has concentrated on increasing oil recovery through in-situ emulsion, there has not been much exploration into the pore-scale level of emulsion formation and its impact...

... change convection carbon dioxide geologist co 2 diffusion coefficient long-term carbon sequestration subsurface storage concentration interface density-driven convection fluid dynamics flow in porous media dissolution international petroleum technology conference co2 Introduction...

... permeability concentration Introduction Table 2 ICP results pre and post collected brine effluent of the static ageing (in the reservoir scenario) H 2 S Concentration 100 ppm of H 2 S 250 ppm of H 2 S 500 ppm of H 2 S Ions Initial Conc. (mg/L) Day 30 (mg/L) Initial Conc. (mg...

... enhanced recovery brine experiment thermal stability polymer synthetic brine si effectiveness compatibility pteglu dtpmp mitigating silicate scale international petroleum technology conference silicate si scale inhibitor inhibition concentration Introduction Chemical flooding...

... drilling robello 2009 efficiency mitchell hole cuttings concentration geologist wellbore pressure management al-rubaii 2023 concentration operation geology viscosity cuttings accumulation artificial intelligence cuttings application effectiveness penetration pipe incident rop new hci...

... conditions. This paper presents the pseudo-fluid modeling of scCO 2 containing nanoparticles and the results of numerical simulation considering the effects of nanoparticle types and concentrations on the CO 2 storage efficiency. In particular, the effect of density alteration on CO 2 storage efficiency...

...% porosity) and non-matrix features are present in low abundance. geologist clastic rock sedimentology subsurface storage sedimentary rock fluid dynamics storage efficiency carbonate rock modeling & simulation climate change concentration international petroleum technology conference...

...-functionalized cellulose diacrylate carbon nanocomposite and investigated its potential as a shale swelling inhibitor and fluid loss controller in water-based drilling fluids. To evaluate the inhibitory effects, linear swelling tests were conducted using varying concentrations (0.2, 0.5, and 1.0) wt...

... sedimentary rock complex reservoir geologist production chemistry mineral oilfield chemistry reservoir characterization climate change dissolution concentration structural geology rock type enhanced recovery composition carbonate rock subsurface storage co 2 elemental...