1-20 of 20
Keywords: coating
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, March 23–April 1, 2021
Paper Number: IPTC-21158-MS
.... To increase the lifetime under erosive conditions, a coating for wire wrapped screens was developed and tested. Erosion occurs, when formation particles hit the screen surface with high velocities or by continuous production of fines through the screen openings. The screen openings must keep a...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, March 23–April 1, 2021
Paper Number: IPTC-21171-MS
... polymers having a natural tendency to coat the surface of the pores by a thin gel-like film of around 1 µm. Contrary to the use of resins which aim at creating a solid around the wellbore, the polymer system maintains the center of the pores fully open for fluid flow, thus preserving oil or gas...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, January 13–15, 2020
Paper Number: IPTC-19985-MS
..., which will be a digital evolution to achieve internet of things (IoT) in oil and gas industry. production control drilling fluids and materials special coating Reservoir Surveillance light weight epoxy HPHT condition production logging temperature measurement protective material drilling...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, March 26–28, 2019
Paper Number: IPTC-19202-MS
... flow, which was enhanced by the magnetic field of the ESP system cable. This paper highlights the integration of three approaches of geochemical analysis of well effluent, Anodic Index differential and tubular internal coating in corrosion prevention and electric submersible pump runlife elongation in...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, November 14–16, 2016
Paper Number: IPTC-18607-MS
... production, especially in the strong base (NaOH) fields. In this paper, the situation of corrosion in the ASP flooding surface system in Daqing Oilfield is surveyed, and several measures of anticorrosion operated in production are demonstrated. A program about coating the production facilities with...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, November 14–16, 2016
Paper Number: IPTC-18796-MS
... Abstract Post stimulation proppant flow back has long been an issue of the hydraulic fracturing process. The most common means of remedying proppant flowback has been to treat proppants with a resin coating. However, the most daunting factor in using resin-coated proppants is the resulting high...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, November 14–16, 2016
Paper Number: IPTC-18802-MS
... fracturing fluid particle regular sand frac sand fracturing materials Upstream Oil & Gas tier 2 sand grain wettability permeability wettability alteration proppant strength coating mesh size frac sand international petroleum technology conference Anderson , R. W. , Cook Jr...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, November 14–16, 2016
Paper Number: IPTC-18722-MS
... Abstract We report a phase inversion polymer coating to prevent clay swelling and fines production in coal seam gas (coal bed methane) or other petroleum well bores. Importantly, this coating remains permeable to gas and water flow across producing coal seams. This approach uses a water-soluble...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 6–9, 2015
Paper Number: IPTC-18541-MS
... Upstream Oil & Gas maintenance mechanical property Pipeline Corrosion well integrity material selection structural connection flowline corrosion riser corrosion inspection coating brownfield modification project application requirement Subsurface Corrosion specification steel fastener...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 6–9, 2015
Paper Number: IPTC-18427-MS
... trees, coatings, sacrificial anodes), which are not typically exposed to these conditions. In order to facilitate safe and reliable development in the Black Sea, a comprehensive laboratory and field study was conducted to establish proper corrosion control and materials selection strategies for...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 10–12, 2014
Paper Number: IPTC-17953-MS
..., sulphate and sulphide scale. Even a thin layer of scale can impede the smooth operation of the valve and pose serious regulatory and safety risks. In this study twenty coatings from seven different natures have been tested. These coatings are Fluoropolymers, Composite (fluotopolymer matrix), Sol-gelnano...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 10–12, 2014
Paper Number: IPTC-17779-MS
... Abstract A risk-based coating condition inspection programme is discussed, enumerating the approach taken to effectively qualify and quantify the level of external corrosion and the minimum level of maintenance re-work required to maintain facility integrity and reliability. Due to a very...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 10–12, 2014
Paper Number: IPTC-18148-MS
... corrosion rate is determined from the analytical model. This model is applicable to be used in onshore and deepwater cases, depending on the surrounding condition. Thus, the position in which corrosion happened worst can be located. Coating or doing material selection for the several part of the pipeline...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, January 19–22, 2014
Paper Number: IPTC-17372-MS
... of penetration (ROP) to less than 10 ft/hr, and in certain cases forced to pull out of hole (POOH). PDC bits with various hydraulics configurations and non-stick coatings were tested in an attempt to alleviate balling issues. The thin layer eroded before the bit entered the problematic zone, exposing...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, March 26–28, 2013
Paper Number: IPTC-16646-MS
... service (FFS) and Risk Based Inspection (RBI) study have been conducted as a part of mitigating risks and applying remedies. Corrosion Inhibition Upstream Oil & Gas mechanism coating oilfield chemistry Corrosion Management austenitic stainless steel integrity Production Chemistry...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, March 26–28, 2013
Paper Number: IPTC-16474-MS
... require stripping the drill string and running it in again which causes loss of time. Also, a new bit has to be installed which causes monetary loss. Coating the bit with Nano-Ceramic coatings can help reduce the wear and tear significantly. Another promising fact is that these coatings don't allow the...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 7–9, 2009
Paper Number: IPTC-13725-MS
... technologies for solids-flowback control is also discussed. Introduction In one family of applications, primary approaches included as part of the initial completion, either a curable resin or a noncurable surface-modification agent, have been used to coat the proppant on-the-fly. Globally, these additives...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 7–9, 2009
Paper Number: IPTC-13949-MS
... Abstract Corrosion in the oil and gas industries is one of the major concerns of the managers and engineers as the main destructive process that lead to huge economic losses. Among all protective methods for corrosion prevention/control, the use of coating systems applied to a metal surface is...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, December 4–6, 2007
Paper Number: IPTC-11385-MS
... years. External corrosion risks are addressed based on the behavior of plant-applied and field joint coatings used in conjunction with cathodic protection (CP) for protecting buried or immersed onshore and offshore pipelines. The overall performance of this protection system is high. However...
Proceedings Papers

Paper presented at the International Petroleum Technology Conference, November 21–23, 2005
Paper Number: IPTC-10571-MS
... and frequent stress cycling. Results of laboratory testing indicates that on-the-fly coating of proppant with surface-modification agents (SMA) can provide an effective means for treating the formation surface in the fracture. The transfer of SMA from the proppant to the formation sand allows the...

Product(s) added to cart

Close Modal