Abstract
Owing to superior temperature stability in comparison with water-based drilling fluids, oil or synthetic-based drilling fluids are generally preferred for high temperature and high pressure (HTHP) formations. However, the thermal degradation of emulsifiers and polymeric components under HTHP conditions that results in loss of rheological and filtration control, barite sag or even fluid phase separation also occurs. It is a challenge to sustain these properties stable under such harsh condition.
Since nanoparticles have potential to provide better thermal stability, improved filtration loss as well as emulsion stability, the aim of this study is to investigate the effect of nano carbon spheres on the properties of oil-based drilling fluids under high temperature conditions. The nano carbon spheres were synthesized with the hydrothermal reaction of glucose. The influence of nano carbon spheres on the rheological, filtration, emulsion stability, settlement stability, as well as lubricity of a typical mineral oil-based drilling fluid with oil to water ratio of 80:20 was investigated before and after thermal aging at 180 and 200°C, respectively.
The structure characterization showed that the uniform hard nano carbon spheres exhibited intermediate wettability. Laboratory performance test indicated that, for the oil-based drilling fluid, the addition of nano carbon spheres improved the rheological properties in terms of yield point and the ratio of yield point to plastic viscosity, which is beneficial for transporting of drilling cuttings. After thermal aging at 200 °C, the filtration loss volume was reduced as high as 70%, and desirable filter cake quality was obtained by incorporation of 1.0 wt% spheres, meanwhile the electrical stability was improved both before and after thermal aging. Furthermore, the fluid formulated with the nano carbon spheres generated better barite sag control. The polarizing microscope observation showed that the nano carbon spheres accumulated at the water-oil interface and formed a steric barrier which probably explained the reason of the above enhanced performance.
The green synthetic routes and environmental friendly characteristics of the nano carbon spheres, in combination with the excellent properties suggested that the nano carbon spheres hold potential as multi-functional additives for formulating oil-based drilling fluids for HTHP drilling operations.
