... viscosity, sand-slurry ratio, and pump rate could affect proppant migration and settlement in the fractures. It is crucial to evaluate the conductivity of these propped fractures while considering the migration and placement of proppant size and types. This paper proposes practical dynamic fracture...

... ABSTRACT Proppant conductivity was usually measured under static or designed proppant concentration. The ISO 13503-5 standard provides specific experimental procedures for measuring the long-term conductivities of proppants. However, it does not consider the proppant migration and placement...

... mudrock shale gas geological subdiscipline treatment temperature conductivity ultimate gas recovery extraction cumulative gas permeability equation different treatment temperature coefficient iom adsorbed ga shale gas recovery thermal conductivity heat capacity ARMA 23 0219 A Microscale...

... ABSTRACT Shale oil and gas reservoir is a new hotspot of oil and gas exploration and development. It is very important for fracturing production to produce artificial fractures with sufficient conductivity. Shale clay and organic matter content is high, which is easy to creep, and it makes...

... to various fluid conditions were conducted to analyze and compare fracture behavior. The method of pressure curve fitting analysis and the method of permeability test by re-injection fracturing fluid were used to quantitatively characterize the rock fracture morphology and evaluate the effect of liquid...

... considering the varying specific heat brings about lower reservoir temperature around the wellbore, and the maximum temperature is obviously higher than that in the case of varying thermal conductivity. In addition, the reservoir temperature can be enhanced by increasing the relative permittivity of reservoir...

... is water). The total time for one cycle is 24 hours (a day). The performance of the well in 30 days is simulated. Effects of several reservoir properties and operational parameters such as formation temperature, heat capacity and thermal conductivity of formation, permeability, porosity, injected...

...ARMA 23 447 CHEMICAL TREATMENT FOR SUSTAINABLE ACID FRACTURE CONDUCTIVITY OF WEAK CARBONATES Desouky, M., Aljawad, M.S., Amao, A. and AlShehri, D.A. King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia AlTammar, M.J. and Alruwaili, K.M. EXPEC Advanced Research Center, Saudi...

... to determine the fracture properties, and used to develop a reservoir model. Multipliers for permeability and conductivity were incorporated in the model to account for the dynamic net stress changes during the production. The model predictions were found to be in close agreement with the well production...

... upstream oil & gas rock type geological subdiscipline geologist complex reservoir operation asia government china government fracture continuous operation flow rate alternation operation rock matrix fracture aperture conductivity aperture injection well heterogeneous fracture...

... ABSTRACT In this study, we conduct laboratory experiments reproducing fracture slip on both propped and unpropped fractures in Marcellus shale to explore the role of shear deformation as a primary control on permeability evolution and its correlation with initial stress state, shear stress...

.... upstream oil & gas geologist sedimentary rock casing and cementing geology sustainability conductivity social responsibility cement thermal property climate change percentage difference clastic rock united states government sustainable development thermal conductivity integrity clte...

... model efficient simulation upstream oil & gas fracture scale fracture connectivity reservoir simulation artificial intelligence reservoir model numerical reservoir model conductivity multi-scale complex natural fracture well production complex fracture ABSTRACT In general...

... in Iceland and eastern Washington state. In this work, we conduct a comprehensive literature review on the properties of mafic and ultramafic rocks such as basalt, gabbro and peridotite. We examine the ranges of material properties and their correlations as well as rock mass characteristics...

... conductivity injection rate china government slickwater fracture maximum shear rate upstream oil & gas asia government rock type sandstone shear rate concentration viscoelasticity wellbore experiment reservoir temperature sandstone reservoir viscosity high shear rate friction reduction...

... the exponential relation. Alramahi and Sundberg (2012) predicted the stress-related conductivity of hydraulic fractures and studied the relationship between rock mineralogy and mechanical properties of proppant embedding. Ghanizadeh et al. (2014) found that the anisotropy and stress sensitivity of permeability...

... proppant are optimized, and the fracture conductivity of continuous sanding and channel sanding are tested. The experiment result shows that high strength ceramic proppant can improve the conductivity of acid erosion fractures under high pressure. In the stress of 50MPa, fracture conductivity by high...

... ABSTRACT Proppants are one of the main components/ingredients used in hydraulic fracturing for reservoir stimulation in order for fractures to have conductivity and maintain it. In hydraulic fracturing, usually when dealing with high parting pressure or harsh environment, high strength durable...

... geothermal system that can act as energy storage media. Aquifer thermal storage systems are dependent on heat conductivity of rocks, storage capacity of aquifer, fluid flow, geochemistry and geo-mechanics. The goals of the project are to 1) evaluate the amount of energy that can be stored in deep aquifers; 2...

... application prospects(Middleton et al., 2015; Yang et al., 2021). proppant supercritical co 2 planar fracture placement upstream oil & gas hydraulic fracturing simulation injection proppant transportation conductivity investigation fracturing fluid tortuous fracture particle fracture...