The integration of geomechanics, geology and reservoir engineering is required to maximise production from unconventional naturally fractured reservoirs. In these reservoirs, fluid flow, especially to production wellbores, can change as reservoir conditions change as fluids are injected to the reservoir. Therefore, an accurate prediction of natural fracture network, initial in-situ stresses and the rock properties is needed to optimize stimulation treatment in naturally fractured unconventional reservoirs. Furthermore, in most unconventional reservoirs, hydraulic fracturing is required to enable sufficient fluid mobility for economic production and it is critical to understand fracture network connectivity, extent, and interaction of natural fractures within the system. Although the technology has greatly improved in the past decade to enhance production, predictive geological- geomechanical models barely exist for optimization of these recovery processes. In research described here, a case study on the geomechanical and geological characterization of an unconventional reservoir is presented with focus on how the natural fracture orientation can change the generated fracture network. The results show less deviation from the original fracture orientation with the smaller angle between the natural fracture and hydraulic fracture, and then resulting fracture geometry is closer to a planar geometry. The larger the angle, the greater the chance of the hydraulic fractures intersecting natural fractures and the greater the diversion of the fracture path along the natural fractures and the more complex the network. Also, the greater the stress anisotropy, the more likely a hydraulic fracture crosses a natural fracture.
Skip Nav Destination
52nd U.S. Rock Mechanics/Geomechanics Symposium
June 17–20, 2018
Seattle, Washington
Geomechanical Characterization of Naturally Fractured Formation, Montney, Alberta
I. D. Gates
I. D. Gates
University of Calgary
Search for other works by this author on:
Paper presented at the 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, Washington, June 2018.
Paper Number:
ARMA-2018-869
Published:
June 17 2018
Citation
Vishkai, M., and I. D. Gates. "Geomechanical Characterization of Naturally Fractured Formation, Montney, Alberta." Paper presented at the 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, Washington, June 2018.
Download citation file:
Sign in
Don't already have an account? Register
Personal Account
You could not be signed in. Please check your username and password and try again.
Could not validate captcha. Please try again.
Pay-Per-View Access
$20.00
Advertisement
76
Views
Advertisement
Suggested Reading
Advertisement