1-10 of 10
Keywords: sand production
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-494
... drawdown reservoir geomechanics Saturation profile fluidized solid phase perforation Reservoir Characterization sand production solid phase matrix erosion activity saturation Upstream Oil & Gas sand matrix porosity wellbore deformation plastic shear strain permeability...
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-504
... ABSTRACT: This paper presents a study on the potential of sand production for an offshore multi-field gas development. Mechanical properties of the reservoir sandstones were established by conducting rock mechanics tests on reservoir cores. The laboratory measured mechanical properties were...
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-505
.... Since the capillary strength is shown to depend only on water saturation, the sanding rate for each value of saturation is constant until destabilizing forces are changed, which leads to so-called episodic sand production after an oil well starts to produce water. These analytical tools can serve as a...
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-588
... sand control sand production laboratory test flow assurance drawdown flow rate numerical simulation fluid flux sand production rate Simulation external stress cavity Papamicho Upstream Oil & Gas analytical model pore pressure particle prediction Erosion process sand...
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-639
... geometry of the field is ideal for stress arching [7], which was observed in the 4D and this could significantly delay any sand production. Both the timing and the success of retrofitting the necessary sand control in the cased and perforated completions required an accurate estimation of the onset of sand...
Proceedings Papers

Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), June 5–9, 2004
Paper Number: ARMA-04-616
..., subsidence, wellbore stability and sand production. Central to creating value through application of geomechanics is a closed loop process that links a mechanical earth model with fit-for-purpose-engineering software, multi-disciplinary teamwork and knowledge management. This paper describes an integrated...
Proceedings Papers

Paper presented at the 4th North American Rock Mechanics Symposium, July 31–August 3, 2000
Paper Number: ARMA-2000-0287
... normalised TWC strength to UCS, thus permitting a foot-by-foot analysis of sand production potential using the model based on TWC strength. To understand the mechanisms of the correlation, studies were conducted to analyse TWC tests based on a non-linear elasto-plastic model and to examine microstructures of...
Proceedings Papers

Paper presented at the 4th North American Rock Mechanics Symposium, July 31–August 3, 2000
Paper Number: ARMA-2000-0295
... ABSTRACT ABSTRACT: Centrifuge physical model tests were performed to study the mode of failure during sand production and its concomitant impact on the productivity index. The tests simulated seepage-induced failure around a multi-perforated vertical well. Results indicate that in the presence...
Proceedings Papers

Paper presented at the 4th North American Rock Mechanics Symposium, July 31–August 3, 2000
Paper Number: ARMA-2000-0303
... ABSTRACT ABSTRACT: The qualitative and quantitative understanding of volumetric sand production in perforations or open hole completions in hydrocarbon reservoirs is addressed. A sand production experiment on a weak compactive sandstone was designed and performed to obtain accurate and...
Proceedings Papers

Paper presented at the 4th North American Rock Mechanics Symposium, July 31–August 3, 2000
Paper Number: ARMA-2000-0271
..., expected to develop in regions of high differential stresses in rock having similar characteristics to Berea sandstone, may be a potential source of sand production. Reservoir Characterization drill-bit penetration rate Berea sandstone reservoir geomechanics borehole breakout sand production...

Product(s) added to cart

Close Modal