Skip Nav Destination
4th North American Rock Mechanics Symposium
July 31–August 3, 2000
Seattle, Washington
ISBN:
9058091554
Issue navigation
All Days
Correlations Between Punch Test Results and Rock Physical Properties
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Measurements of Cutter Forces for a TBM Machine in Äspö Underground Excavation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Increasing Drilling Rate in Deep Boreholes by Impulsive Depressurization
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Analysis of Particle Distribution of Debris and Detritus
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Stick-Slip Vibrations of PDC Bits
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Fracture Process in Rock by Wedge Indentors Utilizing Holographic Interferometry
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Primary Excavation of Rock With an Impact Tool
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Precision and Profile Cutting With Plain and Abrasive Waterjets
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Development and Applications of Very Small Disc Cutters
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modelling of Anisotropic Elastoplastic Damage in Claystones
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Static and Dynamic Poisson's Ratio of Weak Sandstones
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Characterization of Soft Rocks in Taiwan
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Study on Modeling of the Hydromechanical Interactions and Swelling Behaviors of Clayey Rocks
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Rock-Support Interaction Analysis Using a Model With a Pressure-Dependent Deformation Modulus
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Detection of Rock Mass Weakness Ahead of a Tunnel - A Numerical Study
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Tunnelling in Fault Zones - Innovative Approaches
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Construction Example for Tunnelling Under and Adjacent to Complexity Condition in Weathered Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Tunnelling in Swelling Ground
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Coupled Geomechanics-Fluid Flow Modeling in Petroleum Reservoirs: Coupled Versus Uncoupled Response
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Pore Pressure Change Due to Shale-Fluid Interactions: Measurements Under Simulated Wellbore Conditions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Effect of Pore Fluid Composition on Fault Reactivation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Stress Induced by Production From a Fractured Well in a Horizontal Reservoir Bounded by Impermeable Layers
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Implications of Static Poroelasticity for Reservoir Compaction
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Novel Experimental Technique for Investigating Pore Pressure Effect on Mechanical and Acoustic Properties in Sands and Shales
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Effect of Fluid Penetration and Pressurizing Rate on Hydraulic Fracturing
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Finite Element Modeling of an Inclined Wellbore in a Fractured Porous Medium Saturated With Oil and Gas
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Comparisons Between Effects of Linear and Nonlinear Deformational Behaviors of Fractures on P-Wave Attenuation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Tensional Failure and Solid-Fluid Interactions in High Porosity Chalk
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Stress Wave-Induced Damage of Sandstone for Dry and Wet Conditions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Hydraulic Fracture Propagation in Elastic Rock With Large Toughness
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Effects of Thermal Osmosis on Shale Instability
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Swelling and Softening Behaviour of Clay Shale Around a Drilled Hole
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Effect of Initial Pore Pressure Distribution on Deformations Around Wellbores in Shales
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Porothermoelastic Solutions for an Inclined Borehole in Transversely Isotropic Porous Media
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
2D and 3D Elastic and Poroelastic Stress Analyses for Multilateral Wellbore Junctions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Factors Affecting Borehole Breakout Dimensions, and the Potential for Sand Production in High Porosity Berea Sandstone
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Direct Simulation of Particle-Laden Fluids
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Relationship Between Thick-Walled Cylinder and Unconfined Compressive Strength for Application in Sanding Prediction
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Strong Support for Significant Productivity Boost Through Sand Production
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Volumetric Sand Production Experiment
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Ground Conditions and the May 13, 1994 Rock Burst, Coeur d'Alene Mining District, Northern Idaho
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Methods to Address Stope Face Area Support in South African Gold Mines
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Simulated Rockburst - Source, Design, Seismic Effect and Damage
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Distress Blasting on a Mining Face in High Horizontal Stress Environment
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Geomechanical Aspects of the 1999 Gölcük Earthquake
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Caving Induced by Hydraulic Fracturing at Northparkes Mines
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Evaluation of the Stability of Fill in Longhole Mining
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Development of a Centrifuge Facility for Modelling Mining Problems
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Stability Analysis of an Underground Mine Stope Near a Major Geological Discontinuity
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Static and Dynamic Loads in a Scaled Ore Pass
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Monitoring of Reinforced Cemented Backfill in an Underhand Stope
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Electromagnetic Emission From Fracture of Coal Saturated With Gas
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Rockfall Hazard Risk Analysis and Mitigation in an Area of Coal Mine Subsidence
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Relationship Between Stress in Coal and Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Progressive Roof Failure in Breakdown Mountain Room, Salamander Cave
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Hydraulic Fracturing Applied to Inducing Longwall Coal Mine Goaf Falls
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Physical Characterization of Disturbed Coal to Assess Outburst Conditions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Utilization of Geomechanical Properties of Gob to Enhance Gob Gas Recovery and Purity
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Case Study: Prediction of Coal Mine Subsidence Below Clubhouse
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Forgotten Denominator, Pillar Loading
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
An Update on the Scaled Span Concept for Dimensioning Surface Crown Pillars for New or Abandoned Mine Workings
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Review of Crown Pillar Stability Assessment and Rehabilitation for Mine Closure Planning
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Impact of Abutment Relaxation on Stability of Underground Mine Openings
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modeling of Volcano Edifice and Flank Stability and Implications for Hazard Zonation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Use of Slake Durability as an Indicator of Slope Stability of Weathered Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Design and Installation of a Rock Block Monitoring System for the Sculpture at Mount Rushmore
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Shape and Mechanical Properties of Slope Material Effects on the Coefficient of Restitution of Rockfall Study
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Analysis of Deep-Seated Slope Deformations by Paleoseismic Technique
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Back Analysis and Stability Prediction of Highwall Steepening in Weak Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Preventing Collapse of a Quarry Wall
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Computer Modeling of Catch Benches to Mitigate Rockfall Hazards in Open Pit Mines
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Mine, Community and Agencies Rely on Numerical Modeling to Assess Sensitivity of Highwall Movement
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Numerical Simulation of Complex Slope Displacement
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
3DEC Modeling of a Small-Scale Field Explosion Test
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Dynamic Strength and Fragmentation of Selected Rocks Under Impact Loading
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Ground Vibration in Tunnelling by Blasting and its Effect on Surface Structures
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Response of Heritage Buildings to Excavation-Induced Vibrations
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Blasting and Excavation in Sensitive Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Steel Set Loads Analysis
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Overall Elastic Properties of Support System of Rockmass and Rockbolts
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Design of Ground Reinforcement and Support of Shallow Tunnel in Heavily Fractured Rock Mass
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Analytical Study of the Behavior of Rock Bolts
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Lessons in Control of Mine Costs From Instrumented Cable Bolt Support Case Studies
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Assessment of Grouting Effect Using Experimental and Numerical Approaches
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Experimental Study on the Dilatancy Behavior of Single Joints Under Constant τ/σ Loading Conditions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Standardization and Weighting of Variables for the Fuzzy K-Means Clustering of Discontinuity Data
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Discontinuity Data Analysis From Oriented Boreholes
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Practical Application of Borehole Data to Determine In-Situ Block Size Distributions
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Development of a Methodology for the Automatic Construction of Discontinuity Trace Maps Based on Digital Images
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Study on the Estimation of Joint Length Distribution Using Window Sampling in Statistical Joint Modeling
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Application of Mechanical Crack Model to Numerical Study of Rock Mass Behavior
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Estimating the Deformation Modulus of Rock Masses
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Estimating Earthwork Factors for Roadcuts Using Surface Geophysics
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Borehole Estimates of Fracture Size
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Evaluation of Angle of Internal Friction of Fractured Rock Mass
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Mode I and Mixed Mode Fracture Mechanics Testing of WIPP Salt
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Faulting in an Anisotropic, Schistose Rock Under General Triaxial Compression
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Buckling of a Near-Surface Parallel Crack Using the Beam Approximation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A New Model of Joint Shear Strength Under Dynamic Loads
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Energy-Based Evaluation of Rupture Processes for Polycrystalline Materials
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Analyzing Discrete Rock Crack Growth and Interaction
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modeling Contaminant Migration Under a Landfill Site
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Mathematical Model for Flow of Bingham Materials in Fractures
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Mechanistic Approach to the Management of Uncertainty in Reservoir Characterization
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Realization of Analytical Integration for Triangular Crack Edge Element of 3D DDM
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Fractal Properties of Fracture Surface of Brittle Rock Material
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Coupled Stress and Permeability Behavior in Fractured Media and its Application
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Experimental Determination of Stress-Permeability Relationship
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Estimation of Block Conductivity and Scale-Dependency on Groundwater Inflow Into a Tunnel in Fractured Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Discrete Fracture Fluid Flow Simulation of Pumping Tests in a Fractured Rock Mass
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Fracture Closure in Extension and Stress Dependent Permeability of Jointed Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Fracture Intensity Measures in 1-D, 2-D, and 3-D at Äspö, Sweden
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Poroviscoelastic Solution for Anelastic Strain Recovery
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Maximum and Minimum Horizontal Stress Evaluation Based on the Geometry of a Single Borehole Breakout
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Influence of Valley Form on the Subsurface State of Stress - Application Simple Elastic Models to Understand Modes of Appalachian Coal Mine Rock Failure
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Laboratory Verification of a New Dilatmeter Tool for Stress Measurement
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Stress Measurements From Cored Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Mechanical Effects of Water Content in the Creep Parameters
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Spall Formation in Solution Mined Storage Caverns Based on a Creep and Fracture Analysis
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modeling the Post-Failure Relaxation Behaviour of Hard Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Equivalent Properties Approach to Jointed Viscoplastic Rock Slopes
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
On Creep Flow of Natural Slopes
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
DDA Back Analysis of Large Block Test Data
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modeling Drift Stability in Fractured Rock Mass at Yucca Mountain, Nevada - Discontinuum Approach
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Effect of Varied Joint Set Orientations on Keyblock Size
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
An Efficient Displacement Discontinuity Method Using Fast Multipole Techniques
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
An Investigation of Drift Stability in Moderately Jointed Rock Mass
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Theoretical Strength of a Granite Under Dynamic Uniaxial Compressive Load
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Virtual Poromechanics Rock Testing and Rock Deformation: PCORE-3D
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Modelling Brittle Failure of Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Non-Uniformity of Stress and Deformation in Axisymmetric Finite Element Models of Tennessee Marble
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Constitutive Modelling of Partially Saturated Claystone
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Heterogeneity, Anisotropy and Scale Effect in Geomechanical Properties of Rocks in and Around the Abejorral Marble Body, Central Cordillera of the Colombian Andes
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Comparative Study of Rock Support System Design Practice for Large-Scale Underground Excavations
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Comparative Study on the Performance of Back Analysis Procedures for Identification of Nonlinear Deformational Behavior of a Rock Mass Around a Large Underground Powerhouse Cavern
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Concept for Earthquake-Resistant Design of Underground Structures: Stress Response Spectrum
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Coupling Analysis of Deformation and Flow in Jointed Rock Mass During Cavern Excavation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Rock Structure Stability as Viewed From Experience of 3D Modeling
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Hydromechanical Behavior of Shales - Application to the Tournemire Site, France
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Thermo-Hydro-Mechanical Behaviour of Deep Argillaceous Rocks
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
RATDAMPER - A Simple Numerical Procedure for Coupling Mechanical and Hydrological Properties Within the Disturbed Rock Zone at the Waste Isolation Pilot Plant
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Behavior of Rock Mass Around Openings Affected by Thermal Hysteresis Due to Low Temperature Materials Storage
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Poroelastic Modeling of Drying Effects Around Deep Cavities Excavated in Shales
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Effect of Grain Size in Granitic Rock on Crack Extension in Hydraulic Fracturing
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Borehole AE Monitoring During In-Situ Hydraulic Fracturing Stress Measurements
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
The Advantages of Hydrophone Applied to AE Monitoring
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Acoustic Emission Imaging of Induced Asymmetrical Hydraulic Fractures
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Acoustic Emission as an Indicator of Macrofailure of Rock
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Change in Permeability for Shirahama Sandstone Under True Triaxial Stresses
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Micromechanics of Compaction in an Analogue Reservoir Sandstone
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Plane Strain Effect on Strength and Deformation of Hollow Cylinders of Shale
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Cap Plasticity Models and Compactive and Dilatant Pre-Failure Deformation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Microfracturing in the Brittle-Ductile Transition in Berea Sandstone
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Hydraulic Fracturing Experiments in Highly Porous Berea Sandstone
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Physical and Numerical Modeling Study of Jointed Rock Block Strength Under Uniaxial Loading
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Coalescence of Multiple Flaws in Uniaxial Compression
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Experimental Study on Failure Behavior of Tunnel in Jointed Rock Mass Under Excavation
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Discrete Particle and Laboratory Modelling of Core Mechanics
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Experimental Study on the Stability of Dam Foundation in Consideration of the Effect of the Concrete Plug Treatments
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Dynamic and Static Compressions of Rock-Like Spheres Between Two Flat Platens
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Suggestions for Data Analysis of In-Situ Deformation Measurements From Salt and Potash Mine
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Probabilistic Key Block Analysis at Yucca Mountain
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Geological Radioactive Waste Disposal Project in France: Conceptual Model of a Deep Geological Formation and Underground Research Laboratory in Meuse/Haute-Marne Site
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Sensitivity Analysis of THM Simulation for High Level Underground Nuclear Waste Repository
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
An Integrated Approach to Excavation Design - A Project Within Canada's Used Fuel Disposal Program
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Structural Stability Analysis for a High-Level Underground Nuclear Waste Repository in Granite
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Relationship Between the Critical Dissipated Energy Per Unit Volume and the Mechanical Properties of Different Rocks
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Determination of the Fracture Toughness of Rock Materials Using the Modified Hoop Test
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Uncertainty in Basic Properties of Intact Rocks
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A New Test for Rock Strength: Double-Punch Test
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Durability of Some Building Stones in Korea
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Rock Strength Determination Using a New True Triaxial Loading Apparatus, and the Inadequacy of Mohr-Type Failure Criteria
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
AMT Survey in High Mountain Area
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Development of an Interactive 3D Visualization Program for the Analysis of Geotechnical Information
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
A Back Analysis Method Based on Virtual Work Principle - Application to Some Geotechnical Problems
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Application of GIS and Remote Sensing to Geotechnical Characterization of Slopes
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Assessing the Disturbed Rock Zone (DRZ) Around a 655 Meter Vertical Shaft in Salt Using Ultrasonic Waves: An Update
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Blasting Optimization Using Seismic Analysis and X-Ray Fluorescence Spectroscopy
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
Discrete Fracture Network Analysis of Foundation Grouting
Paper presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, July 2000.
