Skip Nav Destination
Proceedings Papers
Issue navigation
All Days
Geology, Technology And Site Characterisation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Four Dimensional Considerations In Forensic And Predictive Simulation of Hazardous Slope Movement
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Integrated, Real-time, 3D GIS-based Geotechnical Hazard Assessment
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Application And Limitations of Ground-based Laser Scanning In Rock Slope Characterization
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Comparison of Terrestrial-based, High Resolution, LiDAR And Digital Photogrammetry Surveys of a Rock Slope
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Digital Approach For Integrating Geotechnical Data And Stability Analyses
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Use of Slope Stability Radar (SSR) In Managing Slope Instability Hazards
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
New Insight Techniques to Analyze Rock-slope Relief Using DEM And 3Dimaging Cloud Points: COLTOP-3D Software
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
High Resolution 3D Imaging For Site Characterisation of a Nuclear Waste Repository
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Application of Metric 3D Images For the Mechanical Analysis of Keyblocks
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Assessment of Laser-based Displacement Mapping In an Underground Opening
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Use of a 3-D Scanning Laser to Quantify Drift Geometry And Overbreak Due to Blast Damage In Underground Manned Entries
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Directional Roughness Profiles From Three-dimensional Photogrammetric Or Laser Scanner Point Clouds
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Joint Set Definition Using Topology Based Structure Mapping
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Surface Expression of Strain Accumulation In Failing Rock Masses
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Predicting Inter-well Rock Mechanics Parameters Using Geophysical Logs And 3-D Seismic Data
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geotechnical Data Management Using AcQuire Workflows And Data Integrity
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Characterising the In Situ Fragmentation of a Fractured Rock Mass Using a Discrete Fracture Network Approach
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
3D Simulation And Aggregation of Fracture Network
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Discrete Fracture Network Modeling For Carbonate Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Analysis of Block Removability In Rock Excavation By Probabilistic Approach
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Accounting For Local Roughness In Geostatistical Simulation of Fracture Surface Topography
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Future Directions For Rock Mass Classification And Characterization - Towards a Cross-disciplinary Approach
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Mass Classification Challenges
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Automatic Drilling Process Monitoring (DPM) For In-situ Characterization of Weak Rock Mass Strength With Depth
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
RDi - A New Method For Evaluating of Rock Mass Drillability
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Slope Design Using Slope Stability Rating (SSR) - Application And Field Verifications
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A New Geomechanical Evaluation System For Slopes: SFi System
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Establishing a Site Specific Mining Geotechnical Logging Atlas
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Mass Strength With Non-persistent Joints
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Modified Approach For Prediction of Strength And Post Yield Behaviour For High GSI Rockmasses In Strong, Brittle Ground
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Peak And Residual Strengths of Jointed Rock Masses And Their Determination For Engineering Design
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Characteristics And Classification of New Zealand Greywackes
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
An Approach For Prediction of Strength And Post Yield Behaviour For Rock Masses of Low Intact Strength
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Deformation Moduli of Soft Rocks In Japan Through Geological Strength Index (GSI)
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Estimation of Rock Mass Deformation Modulus Using the Rock Mass Classifications And Seismic Measurements
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Analysis of Permeability Using BPF, ANFIS & SOM
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Limit Equilibrium, Strength Summation And Strength Reduction Methods For Assessing Slope Stability
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Shear Strength Reduction Approach For Slope Stability Analyses
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Analysis of Blocky Rock Slopes With Finite Element Shear Strength Reduction Analysis
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Three-dimensional Kinematic Conditions For Toppling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Synthetic Rock Mass Model For Jointed Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigating Raise Stability Using Fracture System And Particle Flow Tools
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Quantification of Energy Absorption Capacity of Trees Against Rockfall Using Finite Element Analysis
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Validation of a Synthetic Rock Mass Model Using Excavation Induced Microseismicity
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Effect of Dilation Angle On Failure Process And Mechanical Behavior For a Rock Specimen With Initial Random Material Imperfections
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Boundary Conditions Effects On the Formation of Kink Bands In Fractured Rock Masses
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
DEM Boundary Conditions For Modeling Uniaxial And Biaxial Tests
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Compaction Behavior of Unbonded Granular Media: Discrete Particle Vs. Experimental Vs. Analytical Modeling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Effect of Characteristic Length In the Finite Element Solution of Elastic Deformation of Layered Materials
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
An Equivalent Continuum Approach to Coalmine Water Simulation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Long Term Tunnel Stability In Soft Rock Considering the Influence of Permeability Using a Coupled Analysis
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Three Dimensional Modelling of Spiling Bolts For Tunnelling In a Weakness Zone
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Finite Element Model For the Stability Analysis And Optimum Design of Pressure Tunnels
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Hydromechanical Analysis of the Effect of Fracture Properties On Tunnel Inflow
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Model For Coupled Micro And Macro-scale Swelling Processes In Clay Shales
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Simulation of Multi-fracturing Rock Media Including Fluid/structure Coupling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Combined Finite-discrete Element Modelling of Surface Subsidence Associated With Block Caving Mining.
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Computational Modeling of Multiple Fragmentation In Rock Masses With Application to Block Caving
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Methodology For Estimation of Excavation Damaged Zone Around Tunnels In Hard Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Characterization of Step-path Failure Mechanisms: A Combined Field Based- Numerical Modeling Study
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Discrete Element Damage Model For Rock Slopes
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
PFC Modeling of Rock Cutting Under High Pressure Conditions
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Numerical Modeling of Rock Ridge Breakage In Rotary Cutting
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Fracture Pattern of Anisotropic Rock By Drilling Or Cutting Using the PFC
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Hydraulic Fracture Model With Filtration For Biosolids Injection
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Effects of Alteration On the Engineering Behaviour And Intact Rock Fracture Characteristics of Granite Under Uniaxial Compression
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Crack Initiation And Propagation From Frictional Fractures
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Crack Growth Study of a 3-D Surface Fracture Under Compressions Using Strain And Acoustic Emission Measurements
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Sliding Crack Model For the Uniaxial Compression of Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Coalescence Behavior In Carrara Marble And Molded Gypsum Containing Artificial Flaw Pairs Under Uniaxial Compression
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Fracture Mechanics Code For Modelling Sub-critical Crack Growth And Time Dependency
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Experimental Study of Subcritical Crack Growth In Brittle Materials
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Subcritical Crack Growth of Rocks Using the Double Torsion Method With Consideration of the Crack Length
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Experimental Relationship Between Fracture Toughness And Fracture Roughness In Anisotropic Granitic Rocks
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Effect of Confining Stress And Loading Rate On Fracture Toughness of Rocks
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Evolution of Fracture Toughness And Permeability In Thermally Cracked Westerly Granite From Elastic Wave Velocities
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Fracture Processes of Rocks In Dynamic Tensile-splitting Test
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Advanced Characterization And Numerical Simulation of Indentation Induced Damage In Hard Sandstone
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Homogenization of Hydromechanical Behavior of Fractured Rocks
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Computerized Tomographic (CT) Study of Brittle Material With Internal Flaw Under Hydraulic Pressure And Triaxial Compression
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Closure of Hydraulic Fractures Visualized By X-ray CT Technique In Sand
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Is There a Relation Between the In Situ Principal Stress Magnitudes In Rock Masses?
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
In-situ Stress Estimation Using Crack Closure Energy In Crystalline Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Novel Method For In Situ Stress Measurement - Concept, Theory And Numerical Simulation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Interpretation of Stressmeter Data In Variable Temperature Conditions
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Contemporary Stress Field of the Offshore Carnarvon Basin, North West Shelf, Western Australia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Measurement of the Regional And Local Stress Field Along a 10km Strike of the Zuleika Shear Zone In the Kundana Gold Mining Province of Western Australia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Measurement And Interpretation of In-situ Stress Using an Overcoring Technique From Surface
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Evaluation of Initial Rock Stress State By Hydraulic Fracturing Test In Korea: Overall Characteristics And a Case Study
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Determination of Aperture Distribution And DNAPL Migration In a Rough-walled Rock Fracture
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Laboratory Study of Grout Flow And Settlement In Open Fractures
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigations On the Swelling Behavior of Pure Anhydrites
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Shear Testing of a Model Dam Monolith Under Varying Lateral Constraint Conditions.
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Time-dependant Behavior of Rock Foundation By Laboratory And Numerical Modeling In Gotvand Dam
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Shear Failure And Shear Fracturing In Shales
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Influence of Scale On the Uniaxial Compressive Strength of Brittle Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Confining Effect of End Roughness On Unconfined Compressive Strength
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Long-term Stress-strain Behaviour of Chalk
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Effect of Diagenesis On Stress-strain Behavior And Acoustic Velocities In Sandstones
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Effective Stress Coefficient In Porous Sandstone
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Development of Upper And Lower Bounds to Describe Engineering Properties As a Function of Macroporosity
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Determining Abrasivity With the LCPC Test
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Weathering And Geomechanical Properties of Alvand Granitic Rocks, Western Iran
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Evaluation of the Mechanical And Physical Properties of Rock Containing Pyrite By Leaching Tests
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Use of Geological Models For Foundations On Rock; Test Section of the Sea to Sky Highway Upgrade, B.C.
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Estimating Lateral Support Pressure For Rock Cuts At Washington-Dulles International Airport Expansion
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Dip Slope Analysis And Parameter Uncertainty - Case History And Practical Recommendations
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rockslope Engineering Challenges For Power Transmission Lines, Las Vegas, Clark County, Nevada
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Fall Hazard Assessment of Chapmans Peak Drive, Cape Town, South Africa
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Seismic Monitoring of Rockfall, Helmet Mountain, British Columbia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Deformation Behavior of Deep-seated Rockslides In Crystalline Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigation of Possible Failure Mechanisms of the Portillo Rock Avalanche, Central Andes, Chile
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Complex Rock Slope Failure Investigated By Means of Numerical Modelling Based On Laser Scanner Technique
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Ground-based And Airborne LiDAR For Structural Mapping of the Frank Slide
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geomechanical Analysis of the Instability Phenomena At Stromboli Volcano
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Characterization And Back Analysis of a Complex Slope Deformation: San Bartolo Cliff
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Affect of Shear Strength Criteria Selection In Probabilistic Rock Slope Stability Analyses: A Case Study For a Jointed Rock Slope In Norway
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Dynamic Rock Fragmentation Causes Low Rock-on-rock Friction
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geotechnical Challenges Facing Infrastructure Development In Western China
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Construction of a Landslide Susceptibility Map Using SINMAP Technique And Its Validation: A Case Study
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Stability Analysis of the Slope of a Debris-flow Fan Under Artificial Rainfall
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Probabilities of Casualties On Al-Baha Mountain Road, Saudi Arabia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Hydroelectric Utility Client's View of Rock Engineering Consultants
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Estimating Rock Mass Strength For a Concrete Dam Founded On Good Rock: Blind Slough Dam
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigations And Monitoring of Rock Slopes At Checkerboard Creek And Little Chief Slide
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Engineering Geology, Glacial Preconditioning, And Rockmass Response to Large Scale Underground Excavations In the Niagara Region
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geomechanics Overview of Large-scale Hydropower Station Development In China
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Accounting For Time-dependent Deformation In the Niagara Diversion Tunnel Design
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Hydraulic Fracturing Stress Measurements In Iceland And the Design of Two Hydroelectric Power Projects
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Upgrading the Rock Foundation Stability of Hamidieh Dam With Relief Wells
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Mass Characterization At the Proposed Khorram-Roud Dam Site In Western Iran
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Effects of Jet Grouting On Slope Stability At Shahriar Dam, Iran
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Some Opportunities For Science And Engineering At DUSEL
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Construction of a Large-deep Permanent Cavern For Physics Research At the Deep Underground Science And Engineering Laboratory (DUSEL)
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Towards a Transparent Earth
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Earth Science Collaborations For Deep Underground Science And Engineering Laboratory
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigating Coupled Mechanical-hydrological Behavior In a DUSEL
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The "Observational Approach" In Tunnelling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geomechanical Characterisation of Massive Rock For Deep TBM Tunnelling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Brittle Tectonics In Metamorphic Rocks: Implications For the Excavation of the Bodio Section of the Gotthard Base Tunnel
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Methods For the Evaluation And Interpretation of Displacement Monitoring Data In Tunnelling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Classification Based On Convergence Measurements In Tunneling
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Experience With Shear Zones At the Edge of an Intrusive Body During Tunnel Construction
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Material Behaviour Associated With Tunnelling Through the Weak Rock Masses of the Alpine System In Northern Greece
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Environmental Impacts of Groundwater Due to Tunneling Operations
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Horonobe URL Project - Present Status And Future Plans
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Application of Scientific Visualisation - Stress Control On Permeability Anisotropy In Moderately Fractured Rock
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Mass Yielding In the Aspo Pillar Stability Experiment
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Design And Operation of a Pilot Plant For Underground LNG Storage
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Numerical Simulation Evaluating the Standoff Distance of SPR Caverns From the Edge of the Big Hill Salt Dome
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Predicting the Behaviour And Failure of Large Rock Slopes
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Analysis of Slope Stability In Strong, Fractured Rock At the Diavik Diamond Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geotechnical Study And Optimum Pit Slope Design of the Ashok Coal Opencast Project
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Forecasting Potential Rock Slope Failure In Open Pit Mines Using the Inverse-velocity Method - Case Examples
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Footwall Slope Slab Failure At a Mountain Coal Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Application of Resource Modeling And GIS Tools to Establish the Kinematic Stability of Rock Slopes
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geotechnical Characterization And Design For the Transition From the Grasberg Open Pit to the Grasberg Block Cave Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Hybrid FEM/DEM Approach to Model the Interaction Between Open-pit And Underground Block-caving Mining
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Use of Resource Modeling Tools In Numerical Analysis of Slope Stability
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Analysis of a Rock Slope Failure In a Limestone Open Pit
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geotechnical Inputs For Cave Management In the DOZ Block Cave
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Modelling the Caving of Stope Backs Under High Stress Conditions: A Case Study of Prediction And Field Trials
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Numerical Modeling Analysis For Sao Bento Mineracao S/A, Santa Barbara, MG, Brazil
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Stability Assessment of Non-entry Stopes Using Nonlinear Finite Element Analysis
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Learning From Ground Failures - Underground Mining Case Studies
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Mining And Rock Mass Factors Influencing Hangingwall Dilution
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Mining Within a Weak Rock Mass - Kencana Underground Mine Case Study - PT Nusa Halmahera Minerals (Newcrest Mining Ltd), Indonesia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Hazard Assessment When Mining Orebodies Under Shear Loading
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Monitoring the Behavior of a Sill Pillar At Failure In a Narrow-vein Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Estimation of the Peak And Post-peak Behaviour of Fractured Rock Masses Using Spatial And Temporal Analysis of Mine Induced Microseismicity
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Seismic Hazard Assessment And the Amelioration Thereof In Deep Level Mining Operations
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Coulomb Stress Triggering In the Underground Mining Environment
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Seismic Monitoring In Mines - Design, Operation, Tricks And Traps
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Back Analysis And Performance of Block A Long Hole Open Stopes - Kanowna Belle Gold Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Review of Crown Pillar Investigations In a Historic Mine Camp
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Observations And Evaluation of Floor Benching Effects On Pillar Stability In U.S. Limestone Mines
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Using Confinement As a Means to Estimate Pillar Strength In a Room And Pillar Mine
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Pillar Stability During Underground Mining of the Complete Thickness of a Thick Coal Seam In a Single Lift - Indian Experiences
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geomechanical Maintenance of Flooded Field Mining Problems
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Time-dependent Rock Mass Behavior: Carr Fork Mine Test Stope
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
The Application of Computer Mine Modeling For Wide Room Deep Level Potash Mining In Saskatchewan
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
State of Stress Simulation During Mining of Salt In Solution
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Evolution of Ground Support Practices At Agnico-Eagle's LaRonde Division - Innovative Solutions to High-stress Yielding Ground
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Numerical Modeling And Dynamic Simulation of High-tensile Steel Wire Mesh For Ground Support Under Rockburst Loading
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Bolt Characterization Using Guided Waves And Numerical Simulation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Shear Reinforcing Effect of Rust Proofing Expansive Rock Bolts
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Reinforcement Design of Blocky Rock Masses With Cable Bolts In Discontinuous Deformation Analysis (DDA) Algorithm
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Modeling of Shotcrete Under ASTM C-1550 With PFC3D
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Inspection of Rock-concrete Interface In Underground Support Systems Using a Non-destructive Testing Technique
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Using Blast Vibration Measurements to Estimate Rock Triaxial Strains/stresses And Dynamic Rock Strength For Blast Damage Evaluation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Strategy For Increasing Reliability of Underground Construction
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Investigation of Overburden Movement And a Grout Injection Trial For Mine Subsidence Control
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Case Study Review of Rock Mass Response to Artificial Ground Freezing
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Numerical Modeling Approach of Failure Modes For Cemented Backfill Sill Mats
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Study of Cemented Rockfill For Longhole Stoping
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Preliminary Investigation Into Gel Fill: Strength Development And Characteristics of Sand Paste Fill With Sodium Silicate
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Geomechanical Characterization of the Weyburn Field For Geological Storage of CO2
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Some Fundamental Aspects of Reservoir And Crustal Permeability And Strength
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Predicting the Stress Changes Induced By Fluid Production And Injection In Porous Reservoirs
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Stress Field In the Vicinity of a Natural Fault Activated By the Propagation of an Induced Hydraulic Fracture
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
A Semi-analytical Model For Predicting Fault Reactivation Tendency Induced By Pore Pressure Change
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Hydraulic Fracturing of Oil Reservoirs In Water-sensitive Tuff
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Hydraulic Fracture Propagation Across Frictional Interfaces
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Viscosity-dominated Hydraulic Fractures
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Porothermoelastic Analysis of Wellbore Failure And Determination of In Situ Stress And Rock Strength
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Cyclic Loading of Oil Sand By Large Mobile Mining Equipment
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Microseismic Detection of Casing Failures At a Heavy Oil Operation
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Impact of Rock Properties On the Relationship Between Wellbore Breakout Width And Depth
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Impermeable Drilling Mud to Strengthen Wellbore Stability
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Theoretical Analysis of a Shale Ball Subjected to Chemoporomechanical Loading
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Transient Ground Movement Simulation In Thermal Processes
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Rock Mechanical Aspects of Shaped Charge Penetration
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Calculating Unconfined Rock Strength From Drilling Data
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Evaluating the Slope Instability of the Amiya Slide
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Caving Performance Through Integration of Micro-seismic Activity And Numerical Modeling At DOZ - PT Freeport Indonesia
Paper presented at the 1st Canada - U.S. Rock Mechanics Symposium, Vancouver, Canada, May 2007.
Advertisement
Email Alerts
Advertisement
Advertisement